T-1 3/4 (5mm) SOLID STATE LAMP PRELIMINARY SPEC Part Number: WP7524VGC/Z GREEN ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description zLOW POWER CONSUMPTION. The Green source color devices are made with InGaN zPOPULAR T-1 3/4 DIAMETER PACKAGE. Light Emitting Diode. zGENERAL PURPOSE LEADS. Static electricity and surge damage the LEDS. zRELIABLE AND RUGGED. It is recommended to use a wrist band or anti-electrostatic zLONG LIFE - SOLID STATE RELIABILITY. glove when handling the LEDs. zRoHS COMPLIANT. All devices, equipment and machinery must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. SPEC NO: DSAH1058 REV NO: V.1 DATE: JAN/03/2007 PAGE: 1 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.J.LIU ERP: 1101020219 Selection Guide Dice Part No. WP7524VGC/Z Iv (mcd) [2] @ 20mA Lens Type GREEN (InGaN) WATER CLEAR Viewing Angle [1] Min. Typ. 2 θ 1/2 6700 14000 18° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2.Luminous Intensity / Luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Green λD [1] Dominant Wavelength Δλ1/2 Typ. Max. Units Test Conditions 525 nm IF=20mA Green 535 nm IF=20mA Spectral Line Half-width Green 39 nm IF=20mA C Capacitance Green 65 pF VF=0V;f=1MHz VF [2] Forward Voltage Green 3.2 3.7 V IF=20mA IR Reverse Current Green 10 uA VR = 5V Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Green Units Power dissipation 111 mW DC Forward Current 30 mA Peak Forward Current [1] 100 mA 5 V Reverse Voltage Operating / Storage Temperature -40°C To +85°C Lead Solder Temperature [2] 260°C For 3 Seconds Lead Solder Temperature [3] 260°C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAH1058 REV NO: V.1 DATE: JAN/03/2007 PAGE: 2 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.J.LIU ERP: 1101020219 Green WP7524VGC/Z SPEC NO: DSAH1058 REV NO: V.1 DATE: JAN/03/2007 PAGE: 3 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.J.LIU ERP: 1101020219 PACKING & LABEL SPECIFICATIONS WP7524VGC/Z SPEC NO: DSAH1058 REV NO: V.1 DATE: JAN/03/2007 PAGE: 4 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.J.LIU ERP: 1101020219