KINGBRIGHT WP7679C1VGC/Z

SUPER FLUX LED LAMP
PRELIMINARY SPEC
Part Number: WP7679C1VGC/Z
Technical Data
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Description
Static electricity and surge damage the
LEDS. It is recommended to use a
wrist band or anti-electrostatic glove
when handling the LEDs.
All devices, equipment and machinery
must be electrically grounded.
Features:
Benefits:
*High Luminance output.
*Outstanding Material Efficiency.
*Design for High Current Operation.
*Electricity savings.
*Uniform Color.
*Maintenance savings.
*Low Power Consumption.
*Reliable and Rugged.
*Low Thermal Resistance.
*Low Profile.
*Packaged in tubes for use with
automatic insertion equipment.
Typical Applications:
*Automotive Exterior Lighting.
*Electronic Signs and Signals.
*RoHS Compliant.
*Specialty Lighting.
SPEC NO: DSAH1439
REV NO: V.1
DATE: JAN/16/2007
PAGE: 1 OF 5
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: W.J.ZHU
ERP: 1101020172
Outline Drawings
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the leads emerge from the package.
4. Specifications are subject to change without notice.
Absolute Maximum Ratings at TA=25°C
PARAMETER
VG/Z
UNITS
DC Forward Current
30
mA
Power dissipation
120
mW
Reverse Voltage
5
V
Operating Temperature
-40 To +85
°C
Storage Temperature
-55 To +85
°C
Lead Solder Temperature[1]
260°C For 5 Seconds
1.1.5mm[0.06inch]below seating plane.
SPEC NO: DSAH1439
REV NO: V.1
DATE: JAN/16/2007
PAGE: 2 OF 5
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: W.J.ZHU
ERP: 1101020172
Selection Guide
Part No.
Iv(cd)[1]
@30mA
Min.
Typ.
Viewing Angle[2]
2θ1/2
Typ.
3.8
8.0
70°
LED COLOR
WP7679C1VGC/Z
GREEN (InGaN)
Notes:
1.Luminous intensity is measured with an integrating sphere after the device has stabilized; Luminous Intensity / luminous flux: +/-15%.
2.θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
Optical Characteristics at TA=25°C
IF=30mA Rθj-a=200°C/W
DEVICE
TYPE
PEAK
WAVELENGTH
λPEAK (nm)
TYP.
DOMINANT[1]
WAVELENGTH
λDOM (nm)
TYP.
SPECTRAL LINE
WAVELENGTH
Δλ1/2(nm)
TYP.
525
535
39
VG/Z
Note:
1.The dominant wavelength is derived from the CIE Chromaticity Diagram and represents the perceived color of the device; Wavelength: +/-1nm.
Electrical Characteristics at TA=25°C
FORWARD VOLTAGE
VF(VOLTS)[1]
DEVICE
@
IF=30mA
TYPE
VG/Z
REVERSE CURRENT
IR (uA)
@
VR=5V
CAPACITANCE
C (pF)
@
VF=0V F=1MHZ
THERMAL
RESISTANCE
Rθj-pin
°C/W
TYP.
MAX.
MAX.
TYP.
TYP.
3.3
4.0
10
65
130
Note:
1. Forward Voltage: +/-0.1V.
SPEC NO: DSAH1439
REV NO: V.1
DATE: JAN/16/2007
PAGE: 3 OF 5
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: W.J.ZHU
ERP: 1101020172
Figures
SPEC NO: DSAH1439
REV NO: V.1
DATE: JAN/16/2007
PAGE: 4 OF 5
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: W.J.ZHU
ERP: 1101020172
PACKING & LABEL SPECIFICATIONS
WP7679C1VGC/Z
SPEC NO: DSAH1439
REV NO: V.1
DATE: JAN/16/2007
PAGE: 5 OF 5
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: W.J.ZHU
ERP: 1101020172