0.6mm Pitch Stacking Height 3mm to 16mm Connector FX8, FX8C Series FX8 Series FX8C Series Note that FX8 series and FX8C series are not mated with each other. ■Features 1. Stacking Height 3mm to 16mm available ●Stacking Height 3,4mm-FX8 Series The board to board stacking height can correspond to 3mm~16mm. 2. SMT Coplanarity The coplanarity of the SMT solder area lead is maintained at the high accuracy of less than 0.1mm. 3,4mm 3. Mating Guide The very small and guide rib is provided, and secures ±0.6mm self-alignment, considering the mating operativity into accounts. 4. Mis-insertion Prevention The boss prevents mis-insertion in the board to cause due to the boss position and boss diameter. ●Stacking Height 5 to 16mm-FX8C Series 5. Two-piece Connection Product In order to enhance the mating reliability for the fine pitch connector using two-pieces, the two-pieces of connectors are combined by our unique method, and can secure the mount position accuracy. In such a new concept, the two-piece connected product is prepared at every number of contacts (The standard mating pitch for the two-piece interconnected product in two rows is 11mm.) ■Applications Note pc, business equipments, which require miniaturization or light-weight A226 5 to 16mm FX8C Series ■Product Specifications Rating Current rating 0.4A Operating Temperature Range -55ç to +85ç Note 1. Storage Temperature Range -10ç to +60ç Note 2. Voltage rating 100V AC Operating Humidity Range -40% to 80% Storage Humidity Range 40% to 70% Item Specification Condition 1. Insulation Resistance 100M ohms min. 250V DC 2. Withstanding voltage No flashover or insulation breakdown. 300V AC/1 minute 3. Contact Resistance 80m ohms max. 100mA 4. Vibration No electrical discontinuity of 1µs or more Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. Humidity (Steady state) Contact resistance: 100m ohms max.Insulation resistance: 100M ohms min. 96 hours at temperature of 40ç and humidity of 90% to 95% 6. Temperature Cycle Contact resistance: 100m ohms max.Insulation resistance: 100M ohms min. (-55ç: 30 minutes, 15 to 35ç: 2 to 3 minutes (-85ç: 30 minutes, 15 to 35ç: 2 to 3minutes) 5 cycles 7. Durability (Mating/un-mating) Contact resistance: 100m ohms max. 50 cycles 8. Resistance to Soldering heat No deformation of components affecting performance. Reflow: At the recommended temperature profile Manual soldering: 300ç for 3 seconds Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. ■Material Part Material Finish Remarks Insulator PBS Light brown UL94V-0 Header Contact Phosphor bronze Contact area Lead area Gold plated Tin-lead plated ––––––– Receptacle Contact Phosphor bronze Contact area Lead area Gold plated Tin-lead plated ––––––– Note : The black dots on the insulater will not affect performance. ■Ordering Information ●Single Product - 120 P - SV 1 (22) FX8C q w q Series Name : FX8C e r t y w Number of Contacts :60, 80, 90, 120, 140 t Product height variation Blank : Standard (Minimum low profile) 1: +1mm . . . . . . 3:+3mm e Connector type y Packaging Type P :Header Blank: Tray packaging S :Receptacle r Contact type (21) : Tube packaging SV :Board vertical type (22) : Embossed tape package *The embossed tape packaging product is 60 and 80 contacts only. *The packing of the FX8C-**P-SV6 type is the tray packaging and the tube packaging only. ●two-piece Connection Product FX8C - 120/120 P 11 - SV 1 J q w e r t y u q Series Name :FX8C r Connector to Connector Pitch w Number of Contacts: 60∞2, 80∞2, 90∞2, t Contact type Example: 120/120 = 240 contacts y Product Height VariationBlank : Standard (Minimum lot profile) 1:+1mm . . . . . . 3:+3mm P : Header u J: two-piece connection product 100∞2, 120∞2, 140∞2 e Connector Type : SV : Board vertical type S : Receptacle *The standard packaging of the two-piece connection product is the tray packaging. A237 FX8C-**S-SV FX8C-**/**S11-SVJ FX8C-**S-SV5 FX8C-**/**S11-SV5J FX8C-**P-SV FX8C-**/**P11-SVJ 5mm 10mm FX8C-**P-SV1 FX8C-**/**P11-SV1J 6mm 11mm FX8C-**P-SV2 FX8C-**/**P11-SV2J 7mm 12mm FX8C-**P-SV4 FX8C-**/**P11-SV4J 9mm 14mm FX8C-**P-SV6 FX8C-**/**P11-SV6J 11mm 16mm Header A238 Receptacle 5 to 16 BStacking Height Variation ■Header (Single Product) [FX8C-**P-SV] Unit:mm Part Number FX8C-060P-SV(**) FX8C-080P-SV(**) FX8C-100P-SV(**) FX8C-120P-SV(**) FX8C-140P-SV(**) CL No. Number of Contacts 60 578-0501-9-** 80 578-0503-4-** 100 578-0505-0-** 120 578-0506-2-** 140 578-0507-5-** A 24.60 30.60 36.60 42.60 48.60 B 23.00 29.00 35.00 41.00 47.00 **Blank : Tray packaging product 21: Tube packaging product 22: Embossed tape packaging product Note1: To order the tube packaging product, please determine the quantity for delivery, multiplying the tube packaging product by an integer. C 20.70 26.70 32.70 38.70 44.70 D 17.40 23.40 29.40 35.40 41.40 E Tube packaging Quantity (Pieces) 21 22.20 17 28.20 14 34.20 12 40.20 10 46.20 Note 2: The embossed tape packaging product is prepared for 60 and 80 contacts only. In addition, the product will be procured per reel unit. Please refer to the delivery form item on page A245 for details. [FX8C-**P-SV1] [FX8C-**P-SV2] [FX8C-**P-SV4] [FX8C-**P-SV6] Unit: mm Part Number CL No. FX8C-060P-SV1(**) FX8C-060P-SV2(**) FX8C-060P-SV4(**) FX8C-060P-SV6(**) FX8C-080P-SV1(**) FX8C-080P-SV2(**) FX8C-080P-SV4(**) FX8C-080P-SV6(**) FX8C-100P-SV1(**) FX8C-100P-SV2(**) FX8C-100P-SV4(**) FX8C-100P-SV6(**) FX8C-120P-SV1(**) FX8C-120P-SV2(**) FX8C-120P-SV4(**) FX8C-120P-SV6(**) FX8C-140P-SV1(**) FX8C-140P-SV2(**) FX8C-140P-SV4(**) FX8C-140P-SV6(**) 578-0521-6-** 578-0541-3-** 578-0581-8-** 578-0601-3-** 578-0523-1-** 578-0543-9-** 578-0583-3-** 578-0603-9-** 578-0525-7-** 578-0545-4-** 578-0585-9-** 578-0605-4-** 578-0526-0-** 578-0546-7-** 578-0586-1-** 578-0606-7-** 578-0527-2-** 578-0547-0-** 578-0587-4-** 578-0607-0-** Number of Contacts A B C D E 60 24.60 23.00 20.70 17.40 22.20 80 30.60 29.00 26.70 23.40 28.20 100 36.60 35.00 32.70 29.40 34.20 120 42.60 41.00 38.70 35.40 40.20 140 48.60 47.00 44.70 41.40 46.20 F 5.45 6.45 8.45 10.45 5.45 6.45 8.45 10.45 5.45 6.45 8.45 10.45 5.45 6.45 8.45 10.45 5.45 6.45 8.45 10.45 Tube packaging Quantity (Pieces) 21 17 14 12 10 ** Blank : Tray packaging product 21: Tube packaging product 22: Embossed tape packaging product Note1:To order the tube packaging product, please determine a quantity for delivery,multiplying the tube packaging product by an integer. Note2:The embossed tape packaging product is prepared for 60 and 80 contacts only. In addition, the product will be sold per reel unit. Please refer to the packaging specification item on page A245 for details. Note3:The locator material is installed between leads for the FX8C-P-SV6 type. A239 ■Receptacle (Single Product) [FX8C-**S-SV] Unit:mm Part Number CL No. Number of Contacts A B C D E Tube packaging Quantity (Pieces) 60 24.60 23.05 20.80 17.40 22.20 21 FX8C-080S-SV(**) 578-0803-8-** 80 30.60 29.05 26.80 23.40 28.20 17 FX8C-100S-SV(**) 578-0805-3-** 100 36.60 35.05 32.80 29.40 34.20 14 FX8C-120S-SV(**) 578-0806-6-** 120 42.60 41.05 38.80 35.40 40.20 12 FX8C-140S-SV(**) 578-0807-9-** 140 48.60 47.05 44.80 41.40 46.20 10 FX8C-060S-SV(**) 578-0801-2-** **Blank : Tray packaging product 21: Tube packaging product 22: Embossed tape packaging product Note1: To order the tube packaging product, please determine a quantity for delivery,multiplying the tube packaging product by an integer. Note2: The embossed tape packaging product is prepared for 60 and 80 contacts only. In addition, the product will be procured per reel unit. Please refer to the packaging specification item on page A245 for details. [FX8C-**S-SV5] Unit:mm Part Number CL No. Number of Contacts A B C D E Tube packaging Quantity (Pieces) 60 24.60 23.05 20.80 17.40 22.20 21 FX8C-080S-SV5(**) 578-0823-5-** 80 30.60 29.05 26.80 23.40 28.20 17 FX8C-100S-SV5(**) 578-0825-0-** 100 36.60 35.05 32.80 29.40 34.20 14 FX8C-120S-SV5(**) 578-0826-3-** 120 42.60 41.05 38.80 35.40 40.20 12 FX8C-140S-SV5(**) 578-0827-6-** 140 48.60 47.05 44.80 41.40 46.20 10 FX8C-060S-SV5(**) 578-0821-0-** **Blank : Tray packaging product 21: Tube packaging product 22: Embossed tape packaging product Note1: To order the tube packaging product, please determine a quantity for delivery,multiplying the tube packaging product by an integer. Note2: The embossed tape package product is prepared for 60 and 80 contacts only. In addition, the product will be procured per reel unit. Please refer to the packaging specification item on page A245 for details. BPCB mounting pattern A240 ■Header (two-pieces Connection Product) [FX8C-**/**P11-SVJ] Unit:mm Number of Contacts A B C D E F FX8C-060/060P11-SVJ 578-0651-1 Part Number CL No. 60∞2 31.70 24.70 23.00 20.70 17.40 22.20 FX8C-080/080P11-SVJ 578-0653-7 80∞2 37.70 30.70 29.00 26.70 23.40 28.20 FX8C-100/100P11-SVJ 578-0655-2 100∞2 43.70 36.70 35.00 32.70 29.40 34.20 FX8C-120/120P11-SVJ 578-0656-5 120∞2 49.70 42.70 41.00 38.70 35.40 40.20 FX8C-140/140P11-SVJ 578-0657-8 140∞2 55.70 48.70 47.00 44.70 41.40 46.20 Note: The two-piece connection product is packaged by tray. [FX8C-**/**P11-SV1J] [FX8C-**/**P11-SV2J] [FX8C-**/**P11-SV4J] [FX8C-**/**P11-SV6J] Unit: mm Part Number FX8C-060/060P11-SV1J FX8C-060/060P11-SV2J FX8C-060/060P11-SV4J FX8C-060/060P11-SV6J FX8C-080/080P11-SV1J FX8C-080/080P11-SV2J FX8C-080/080P11-SV4J FX8C-080/080P11-SV6J FX8C-100/100P11-SV1J FX8C-100/100P11-SV2J FX8C-100/100P11-SV4J FX8C-100/100P11-SV6J FX8C-120/120P11-SV1J FX8C-120/120P11-SV2J FX8C-120/120P11-SV4J FX8C-120/120P11-SV6J FX8C-140/140P11-SV1J FX8C-140/140P11-SV2J FX8C-140/140P11-SV4J FX8C-140/140P11-SV6J CL No. 578-0671-9 578-0691-6 578-0731-9 578-0751-6 578-0673-4 578-0693-1 578-0733-4 578-0753-1 578-0675-0 578-0695-7 578-0735-0 578-0755-7 578-0676-2 578-0696-0 578-0736-2 578-0756-0 578-0677-5 578-0697-2 578-0737-5 578-0757-2 Number of Contacts A B C D E F 60∞2 31.70 24.70 23.00 20.70 17.40 22.20 80∞2 37.70 30.70 29.00 26.70 23.40 28.20 100∞2 43.70 36.70 35.00 32.70 29.40 34.20 120∞2 49.70 42.70 41.00 38.70 35.40 40.20 140∞2 55.70 48.70 47.00 44.70 41.40 46.20 G 4.35 5.35 7.35 9.35 4.35 5.35 7.35 9.35 4.35 5.35 7.35 9.35 4.35 5.35 7.35 9.35 4.35 5.35 7.35 9.35 H 5.45 6.45 8.45 10.45 5.45 6.45 8.45 10.45 5.45 6.45 8.45 10.45 5.45 6.45 8.45 10.45 5.45 6.45 8.45 10.45 Note1: The two-piece connection product is packaged by tray. Note2: The locator material is installed between leads for the FX8C-**/**P1-SV6J type. A241 ■Receptacle (two-piece Connection Product) [FX8C-**/**S11-SVJ] Unit:mm Part Number CL No. Number of Contacts A B C D E F FX8C-060/060S11-SVJ 578-0901-7 60∞2 31.70 24.60 23.05 20.80 17.40 22.20 FX8C-080/080S11-SVJ 578-0903-2 80∞2 37.70 30.60 29.05 26.80 23.40 28.20 FX8C-100/100S11-SVJ 578-0905-8 100∞2 43.70 36.60 35.05 32.80 29.40 34.20 FX8C-120/120S11-SVJ 578-0906-0 120∞2 49.70 42.60 41.05 38.80 35.40 40.20 FX8C-140/140S11-SVJ 578-0907-3 140∞2 55.70 48.60 47.05 44.80 41.40 46.20 Note: The two-piece connection product is packaged by tray. [FX8C-**/**S11-SV5J] Unit:mm Part Number CL No. Number of Contacts A B C D E F FX8C-060/060S11-SV5J 578-0921-4 60∞2 31.70 24.60 23.05 20.80 17.40 22.20 FX8C-080/080S11-SV5J 578-0923-0 80∞2 37.70 30.60 29.05 26.80 23.40 28.20 FX8C-100/100S11-SV5J 578-0925-5 100∞2 43.70 36.60 35.05 32.80 29.40 34.20 FX8C-120/120S11-SV5J 578-0926-8 120∞2 49.70 42.60 41.05 38.80 35.40 40.20 FX8C-140/140S11-SV5J 578-0927-0 140∞2 55.70 48.60 47.05 44.80 41.40 46.20 Note: The two-piece connection product is packaged by tray. BPCB mounting pattern A242 BDetailed Figure After Joint Removal (Single Product in two-piece Connection Product) A243 BConnector Precautions 1. Tolerance Clearance on Mating Side The effective contact length of the product is set to 2.0mm. Please use the product so as to set to less than 12mm the clearance between the header and the receptacle in the mating process.. 2. Fixation Between Mounting Boards If this product is fixed only by mating force, Please consider the fixing method so as not to apply loads such as vibration, shock and so on. 3. Stacking General Tolerance in Mating Stack Amm A +0.3 –0.2 mm Note: Please Note that the above tolerance of the stacking height doesn't include the solder paste thickness. 4. Handling Two-piece Connection Product Both joint bar edges of the two-piece connection product are fixed by joints, while the mating process can't be performed in that state. Before the mating process, please remove the joint bars as if pull it up. (Don't remove the joint bars before mounting on the board. ) Before removing joint bar 5. Mounting Temperature Profile (Reference) After removing joint bar Applicable Conditions Reflow system :IR reflow Solder :Paste type 63 Sn/37 Pb (Flux content 11 wt%) Test board :Glass epoxy 161mm x 100mm x 1.6 mm Metal mask thickness :0.15 mm Recommended temperature profile. The temperature may be slightly changed according to the solder paste type and amount. 6. Cautions This product is made as the thin formed product in order to be miniaturized. A244 BPackaging Type Packaging Type Number of Contacts Packaged Product Pieces Tube packaging Sales Unit 60 contacts 80 contacts 100 contacts 120 contacts 140 contacts 21 pieces 17 pieces 14 pieces 12-pieces 10pieces Deliver the multiplied pieces. (Example) In case of 20 contacts,21 pieces, 4two-pieces,... 550mm±2mm Total Tube Length 44mm Tape Width Product Pitch 56mm 72mm 12mm Embossed Tape Packaging Emboss Reel Diameter Refer to the table on page A246 in this catalog. Packaged Product Pieces Refer to the table on page A246 in this catalog. Sales Unit Per reel *The above packaging type is , as listed for the single product only. In addition, the packaging type of the two-piece connection product is the tray packaging. BPackaging Specification [Tube packaging] ●Header [FX8-**P-SV (21)] [FX8-**P-SV1 (21)] [FX8-**P-SV2 (21)] [FX8-**P-SV4 (21)] [FX8-**P-SV6 (21)] ●Receptacle [FX8C-**S-SV (21)] [FX8C-**S-SV5 (21)] P/S Header Receptacle Part Number A FX8C-**P-SV0 (21) 9 FX8C-**P-SV1 (21) 10 FX8C-**P-SV2 (21) 11 FX8C-**P-SV4 (21) 13 FX8C-**P-SV6 (21) 15 FX8C-**S-SV0 (21) 7.4 FX8C-**S-SV5 (21) 12.4 A245 [Embossed Tape Package] ●Carrier Size Pattern Unit: mm P/S Header Receptacle Part Number A B C D E Product Pieces FX8C-**P-SV0 (22) 5.5 7.9 5.2 1.2 Ø370 1000 pieces FX8C-**P-SV1 (22) 5.5 7.9 6.2 1.2 Ø370 1000 pieces FX8C-**P-SV2 (22) 5.5 7.9 7.2 1.2 Ø330 0500 pieces FX8C-**P-SV4 (22) 5.5 7.9 9.2 1.2 Ø370 0500 pieces FX8C-**P-SV6 (22) 5.5 7.9 11.2 1.2 Ø370 0500 pieces FX8C-**S-SV0 (22) 6.0 8.4 4.3 1.2 Ø330 1000 pieces FX8C-**S-SV5 (22) 6.0 8.4 9.3 1.2 Ø370 0500 pieces ** : Number of Contacts ●Reel State Size Pattern (FREE) A246