CRF Series MEDER electronic 7 GHz High Frequency Reed Relay for 50 Ω Impedance DESCRIPTION The MEDER CRF Series Reed Relay is a low-profile device made with a ceramic case that exactly matches the thermal coefficient of expansion of the reed switch glass and the reed lead to eliminate any potential packaging stress. Capable of switching up to 7 GHz with <40 ps rise times for digital operations, this leadless 50 Ohm reed relay is the smallest in the industry and switches into the billions of operations. FEATURES • Ceramic / thermoset molded package • Patent pending • Smallest in the industry • No lead frame surface mount design eliminates skewing of leads and coplanarity issues • No internal solder connections • Minimum path length for RF • Up to 7 GHz switching frequencies • Ability to switch fast pulses with rise times of 40 pico seconds or less • Available with BGA • Internal magnetic shield standard • Very low profile • Gold plated leads for high conductivity RF path • Low thermal offset typical 1 µV • TCE matching of all internal components • Insulation resistance typical 1014 ohms • 3 Volt option available Capable of withstanding reflow-soldering operations up to 260°C, the relay uses no internal solder and has 1 µV typical thermal offset. Measuring only 8.6 mm x 4.4 mm x 3.4 mm, the leadless design eliminates skewing of leads and co-planarity issues. APPLICATIONS • Test and measurement • Medical Equipment • Telecommunications • High frequency applications DIMENSIONS (Non-BGA) *All dimensions in mm (inches) PAD LAYOUT PCB LAYOUT 0.70 [0.0276] 10x R0.475 [0.187] 1.45 [0.0571] 4.40 [0.1732] 2.20 [0.0866] Ø 0.95 [Ø 0.0031] 1.20 1.475 1.20 [0.0472] (Bottom View) 3.60 [0.1417] 0.50 [0.0197] [0.0472] 0.95 [0.0374] 9.60 [0.378] 3.125 [0.123] [0.0581] (Top View) 0.925 [0.0364] PIN OUT www.meder.com 251 MEDER electronic CRF Series 7 GHz High Frequency Reed Relay for 50 Ω Impedance DIMENSIONS (with BGA) *All dimensions in mm (inches) PAD / PCB LAYOUT PIN OUT POST REFLOW (Bottom View) (Top View) Height: max. ORDER INFORMATION Series Nominal Voltage Contact Form Option CRF 05- 1A X Part Number Example CRF05 - 1AS 05 is the nominal voltage 1A is the contact form S is the solder ball option S* Options * Solder Ball Option (non-BGA part number is CRF05-1A) COIL DATA Contact Form Switch Model All Data at 20 °C * 1A 80 Coil Voltage Coil Resistance Pull-In Voltage Drop-Out Voltage Nominal coil Power VDC Ω VDC VDC mW Nom. Max. Min. Typ. Max. Max. Min. Typ. 5 7.5 135 150 165 3.75 0.75 167 * the pull-in / drop-out voltages and coil resistance will change at the rate 0,4% per oC www.meder.com 252 CRF Series MEDER electronic 7 GHz High Frequency Reed Relay for 50 Ω Impedance RELAY DATA Switch Model --> Contact Form --> All Data at 20° C Contact Ratings Conditions Contact Ratings Any DC combination of V & A not to exceed their individual max.‘s. Switching Voltage Switching Current Contact 80 Form A Min. Typ. Max. Units 10 W DC or peak AC 170 V DC or peak AC 0.5 A Carry Current DC or peak AC 0.5 A Bulk Resistance Through all plated material on substrate 200 350 mΩ Static Contact Resistance w/ 0.5 V & 50 mA 75 100 mΩ dynamic Contact Resistance Measured w/ 0.5 V & 50mA 100 150 mΩ Insulation Resistance (100 Volts applied) Across Contact Contact to coil and shield 10 1013 Breakdown Voltage Across Contact Coil to contact 210 1500 Operate Time incl. Bounce Measured w/ nominal voltage 0.1 ms Release Time No coil suppression 0.02 ms Capacitance (@ 10 kHz) Across Contact Contact to coil and shield 10 10 1014 12 Ω VDC 0.1 0.7 pF 1000 106 Cycles Life Expectancies Switching 5 V - 10mA DC <10 pF stray cap. For other load requirements, see the life test section on P. 151. Environmental Data Shock Resistance 1/2 Sine wave duration for 11 ms 50 Vibration Resistance From 10 - 2000 Hz 10 Ambient Temperature 10 C/ minute max. allowable -40 Storage Temperature 10 oC/ minute max. allowable -55 Soldering Temperature 5 sec. dwell Material of Case Themoset / Ceramic Material of pads Ag plated o g g 125 o C 125 o C 260 o C www.meder.com 253 MEDER electronic CRF Series 7 GHz High Frequency Reed Relay for 50 Ω Impedance Insertion Loss: VSWR: Insertion loss tested to 7 GHz for the CRF Reed Relay. Horizontal full scale: 7.0 GHz. Vertical scale: 10 dB/div referenced from the 0 mark. Voltage Standing Wave Ratio (VSWR) tested to 6.5 GHz for the CRF Reed Relays. Horizontal full scale: 6.5 GHz. Vertical scale: 1.0/div referenced from the bottom line 1.0 mark. Copper Wire Insertion Loss: Isolation: Insertion loss tested to 7 GHz for the CRFReed Relay but with the internal Reed Switch replaced with a bare copper wire. Horizontal full scale: 7.0 GHz. Vertical scale: 10 dB/div referenced from the 0 mark. Isolation tested to 7 GHz for the CRF Reed Relay. Horizontal full scale: 7.0 GHz. Vertical scale: 10 dB/div referenced from the 0 mark. www.meder.com 254 CRF Series MEDER electronic 7 GHz High Frequency Reed Relay for 50 Ω Impedance Return Loss: Characteristic Impedance: Return loss tested to 6.5 GHz for the CRF Reed Relay. Horizontal full scale: 6.5 GHz. Vertical scale: 10 dB/div referenced from the 0 mark. Represents the characteristic impedance going through the CRF Reed Relay. Waves 1 through 5 depict calibration points. Horizontal full scale: 750 ps. Vertical scale: 150 mUnit/div referenced from the 0 unit mark. The vertical scale measures the reflection coefficient. Smith Chart: 1 - Short Before Relay 2 - Open Contacts 3 - Close Contacts 4 - Closed Contacts - Shorted 5 - Closed Contacts - 50 Ohm Shows a Smith Chart plotted for frequencies to 4 GHz. The second dotted circle starting from the right is the 50 Ohm impedance point. www.meder.com 255