MITSUMI microSD card connectors CIM-H32N, H52N, H52R Connectors FEATURES 1. Push-in Push-out eject machanism. Card eject distance 3.8mm 2. Small and tin design Normal mount type [CIM-H32N] : H 1.85mm W 13.7mm Length 16.0mm Reverse mount type [CIM-H52R] : H 1.85mm W 14.0mm Length 16.0mm 3. Prevent card jump out of a connector with brake mechanism. 4. Switch With card detection [Normally open type] 5. Prevent card drop from connector with half lock mechanism. CIM-H52R CIM-H32N HOW TO ORDER 1. CIM-H32N 2. CIM-H52N H32N-008-21 0 - A G G E 1 1 2 3 4 5 6 7 8 2 3 4 5 6 H52N-008-21 0 - A G G E 7 8 Series No. (H32N : Nomal type) No. of contacts (008 : 8pins) Housing material (21 : LCP resin) Housing UL grade (0 : UL94V-0) Contact plating (A : Gold) Contact plating thickness (G : 3µm) Contact read style (G : Angle SMT) Package (E : Taping) 1 1 2 3 4 5 6 7 8 2 3 4 5 6 7 8 Series No. (H52N : Nomal type) (H52R : Reverse type) No. of contacts (008 : 8pins) Housing material (21 : LCP resin) Housing UL grade (0 : UL94V-0) Contact plating (A : Gold) Contact plating thickness (G : 3µm) Contact read style (G : Angle SMT) Package (E : Taping) MITSUMI microSD card connectors SPECIFICATIONS ELECTRICAL CHARACTERISTICS AC 50V (rms) 0.5A 500V AC (rms) 1minute 1000MΩ min. (Initial value) 100mΩ max. (Initial value) Rated Voltage Rated Current Withstanding Voltage Insulation Resistance Contact Resistance MECHANICAL CHARACTERISTICS 10,000times 2.0N~6.0N 2.0N~6.0N -25~+85°C Life (Matching Cycle) Card Insertion Force Eject Force Using Temperature Range MATERIAL & FINISH Component Parts Housing Contact CD Switch Vdd CD Switch Vss Plate Slider Half Lock Coil Spring Lock Pin Material LCP resin Copper Alloy Copper Alloy Copper Alloy Copper Alloy PA9T resin SUS SUS SUS Finish (Black) Gold plating Gold plating Gold plating - (Black) - Board installation condition 1.85 Normal type (CIM-H32N) 16 Card Contact pad side Reverse type (CIM-H52R) 1.85 Card 16 Contact pad side MITSUMI DIMENSIONS CIM-H32N 5.3 7.74 1.36 13.7 5.5 1.2 0.6 1.85 0.5 SW [Vdd] 0.3 1.3 0.3 16 12.5 0.8 0.6 SW [Vss] 0.3 0.9 0.85 1.3 0.3 0.95 +0.25 0 Card entrance (7.94) Recommended PWB layout 11.23+0.15 -0.05 Card entrance 5.5 0.75 1.1 5.9 7.74 1.96 1.1 1.2 1.8 1.8 #1 1.2 4.75 11.8 (0.6) 7.7 14.7 7.7 (0.3) 1.4 2.32 0.3 0.3 1.3 1.1 0.8 1.4 1.4 5.35 14.55 Recommended PWB layout (NTS) ±0.05 14.2 24 11.5 4 1.75 40 ±0.2 (10Pitch) 20 2.25 0.5 3.35 16.5 Tiller area 12~18 Pockets er ø380 ø150 Lead Connector parked area 24.4 +2 0 2 ±0.5 1.9 Packing specification of area 0 20~3 12~18 Pockets Leader area e r tap cove 200 150~ MITSUMI microSD card connectors CIM-H52R 7.7 14 0.7 #8 14.8 1.2 0.6 1.8 1.5 16.4 7.7 1.1 5.94 3.31 2.28 1.8 1.65 Recommended PWB layout 0.35 1.85 0.6 1.2 0.95 +0.15 -0.05 Card entrance 11.21 +0.15 -0.05 Card entrance 2.32 12.6 16 1.2 1.2 #1 2.11 1.08 0.55 0.7 4.74 1.1 0.7 4 0.5 16.4 17.3 3.35 Tiller area 12~18 Pockets f co rea o er a ø150 ø380 +2 2 ±0.5 ape ver t Lead Connector parked area 24.4 0 15.85 10.8 4-1.65 Recommended PWB layout (NTS) ±0.05 11.5 24 0.68 24 (10pitch) 1.8 ±0.2 1.75 40 1.8 (0.3) Packing specification 2.65 8-0.8 13 15.7 0.65 0 20~3 12~18 Pockets Leader area 200 150~