MITSUMI SD Memory Card Connectors CIM-F22 Connectors FEATURES 1. SMT-type SD memory card connector. 2. Outstanding touch! 8mm stroke type with push-in push-out eject mechanism. 3. Card detection switch and write protect switch provided. 4.Ideal for saving space on the board! Stand-off height is only 1.8mm (connector height is ultrathin, at 2.8mm). 5. Reverse type also available. 6. Half-lock provided to prevent the card from falling out. HOW TO ORDER F22-009-21 0-A G G E1 1 2 3 4 5 6 7 8 2 3 4 5 6 7 8 9 Series No. (F22) No. of contacts (009 : 9pins) Housing material (21 : LCP resin) UL grade (0 : UL94V-0) Contact plating (A : Gold) Contact plating thickness (G : 0.3µm) Contact style (G : Angle) Package (E : Taping) 9 Supplementary symbol ST : Standard type RT : Reverse type RB : Reverse B type SPECIFICATIONS CHARACTERISTICS Rated Voltage Rated Current Withstanding Voltage Insulation Resistance Contact Resistance AC 50V (rms) 0.5A 500V AC (rms) 1minute 1000MΩ min. (at 500V DC) 100mΩ max. MECHANICAL CHARACTERISTICS Life (Matching Cycle) Card Insertion Force Eject Force Using temperature Range 10,000 times 4.9N (0.5kgf) ~9.8N (1kgf) 4.9N (0.5kgf) ~9.8N (1kgf) -25~+90°C MITSUMI SD Memory Card Connectors MATERIAL & FINISH Component Parts Housing Contact CD Switch CD · WP Switch WP Switch Wing Plate Slider Coil Spring Lock Pin Material LCP resin Copper Alloy Copper Alloy Copper Alloy Copper Alloy Copper Alloy SUS PPA resin SUS SUS Finish (Black) Gold plating Gold plating Gold plating Gold plating Gold plating (Black) - DIMENSIONS Standard type 25.2 ±0.1 12.1±0.1 2.7 ±0.1 0.4 1.5 B(NTS) 5- PART WHICH IT IS IMPOSSIBLE TO MOUNT 8.05 9 14.01 13.35 10.3 4.2 9.55 1.85 2-Ø1 +0.1 0 hole 3.6 3.6 10.3 21.05 10.3 17.6 12.1 9.05 7.25 3 4.65 20 17.6 13.53 10.3 3.2 B 1.65 25.2 0.8 0.2 3 (2) 9.55 6.95 10 9.5 7.85 1.8 5=12.5 2.7 2-Ø1.6 +0.1 0 hole 7.48 10.75 21.05 0 Ø1.5 -0.1 20 27 A(NTS)NOTE2 13.53 A 2.5 A (3) 3 0.8 5.8 CARD INSERTION DIMENSION 1.5 5.63 0.96 (32.8) 12.85 11.05 9.75 0.35 max. #9 3 #1 1.8 1. #8 #7 #6 #5 #4 #3 #2 2Ø 0.2 0.2 A(NTS) 1.5 +0.2 28.5 -0.1 13.5 12.85 ±0.1 11.05 ±0.1 9.75 ±0.1 8.03 ±0.1 5.625 ±0.1 2.5 ±0.1 5=12.5 1 0.8 0.6 26.5 0.3 THE LOADING SURFACE OF THE CONNECTOR RECOMMENDED PWB LAYOUT(NTS) ±0.05 13.15 (8.2) STROKE (41) (5.8) 0.8 (32.8) (0.8) STROKE (32) (5) 24.1+0.1 0 1.56 +0.1 0 2.25 +0.1 0 Center of card insertion (14) 0 22.6 -0.1 The position in set The position in closet Unit: mm Tolerance: ±0.3 The position in ejection Reverse type 0 Ø1.5 -0.1 0.6 0.8 1 1.5 13.5 12.85 11.05 9.75 8.03 5.63 (25.75) 8.05 (2.2) 5.63 (3) (6.68) (7.18) (1.4) (2) 2.5 5=12.5 2.7 A Ø1.6 Hole 14.01 Part which it is impossible to mount (27.35) 25.8 27 ±0.1 (26.55) 19.33 >LCP< 29.9 29.4 27.6 24.9 A(NTS) B Ø1 +0.1 0 Hole 2-Ø2 1.8 ±0.1 4.7 THE LOADING SURFACE OF THE CONNECTOR 1.5 Ø1.1 Ø1+0.1 0 Hole Hole 13.35 0.35 0.85 0.7 (3.2) (28.5) (2.2) (4.7) (0.85) 3 101 32.8 18±0.1 11.4 6.82 3 (0.8) 0.35 max. A 27.6 ±0.1 26.15 ±0.1 B(NTS) 12.85 11.05 9.75 1.8 ±0.1 #5 #6 #7 #8 3.7 1.9 2.8 ±0.1 12.5 #1 #2 #3 #4 A(NTS) (4.6) 4.2 2.7 #9 1.5 1.5 28.5 +0.2 -0.1 26.5 THE LOADING SURFACE OF THE CONNECTOR 0.96 ±0.15 Center of card insertion PART WHICH IT IS IMPOSSIBLE TO MOUNT RECOMMENDED PWB LAYOUT(NTS) ±0.05 THE BACK SURFACE OF CONNECTOR (8.2) STROKE (41) (32.8) (5.8) (14) 0.8 101 101 101 11.4 >LCP< >LCP< >LCP< 0 Ø1 -0.1 13.15 (0.8) STROKE (32) (5) 24.1+0.1 0 0 22.6 -0.1 1.56 +0.1 0 2.25 +0.1 0 17.26 ±0.2 20.6 -0.1 -0.2 24.9 ±0.1 The position in set The position in closet The position in ejection Unit: mm Tolerance: ±0.3