MITSUMI Side Click Type Tactile Switches SOH Series Switches FEATURES 1. Minimized surface area. 2. Excellent sealing to resist contamination and flux. 3. Stainless steel click springs provide a sharp tactile sensation and long life. 4. Ideal of side click controllers in miniature applications. 5. SMT type and reflow-soldering for surface mounting. USES 1. Side click type tactile switches for use in mobile phones and miniature digital devices. MODEL NAME CODE SOH-213HST Packaging T (Taping) Boss S (With) N (Without) H (Standard) Operating Force 3 (1.8N : 184gf) Height 1 (1.5mm) Earth terminal Side click type Tactile Switch MITSUMI Side Click Type Tactile Switches SPECIFICATIONS Electrical Characteristics Mechanical Characteristics Rating 50mA, 12V DC Contact Resistance Insulation Resistance 100mΩ or less 100MΩ or more Withstand Voltage 1 minute at 250V Operating Force 1.8N (184gf) Life 100,000cycles TYPE Model Name Code Order Number Operating Force Boss Pcs SOH-213HST R66 6072 SOH-213HNT R66 6073 1.8N(183gf) With 5,000 1.8N(183gf) Without 5,000 DIMENSIONS B Circuit diagram 1.8 ±0.1 2.9 ±0.1 (BASE) 3.1 ±0.2 (COVER) 0.2 +0.1 -0.05 Travel 2.1 ±0.15 1 ±0.1 3.9 ±0.1 A A 1.1 ±0.2 2.1 ±0.2 0.85 ±0.1 0.55 1.5 +0.15 -0.1 Recommendation Metarumasuk Thickness : 200µm (0.5) 4.2 +0.2 0 B 1.8 ±0.05 0 -0.1 3.8 2.3 1.1 2-ø0.65 0 +0.1 0 0 0.5 -0.1 Reference Printed wiring board land dimensions (When viewed from switch mounting side) 1.7 3.2 4.3 5.4 4-No circuit pattern area 2-ø0.75 +0.1 0 Hole Tolerance: ± 0.3mm 4 2 1.75 ø1.5 ±0.1 Plastic Tape Dimensions Reel Dimensions ø380 ±2 ±0.3 12 ±0.5 ø60 over 8 MITSUMI Label 0.3 Direction of Pull 2 ±0.5 14 ±1.5 10° R1 ±0.5 0.25 ø13 5.5 2ø0.5 Fig-3 TOLERANCE ±0.1 *One reel accommodates 5,000 pieces (Ø380). Unit : mm