TI TL751L05CP

TL750L
TL751L
www.ti.com.................................................................................................................................... SLVS017U – SEPTEMBER 1987 – REVISED SEPTEMBER 2009
LOW-DROPOUT VOLTAGE REGULATORS
FEATURES
1
•
•
•
Very Low Dropout Voltage, Less Than 0.6 V at
150 mA
Very Low Quiescent Current
TTL- and CMOS-Compatible Enable on TL751L
Series
60-V Load-Dump Protection
8
2
7
3
6
4
5
INPUT
COMMON
COMMON
NC
COMMON
1
Reverse Transient Protection Down to –50 V
Internal Thermal-Overload Protection
Overvoltage Protection
Internal Overcurrent-Limiting Circuitry
Less Than 500-μA Disable (TL751L Series)
TL750L . . . KC PACKAGE
(TOP VIEW)
TL750L . . . D PACKAGE
(TOP VIEW)
OUTPUT
COMMON
COMMON
NC
•
•
•
•
•
OUTPUT
COMMON
INPUT
COMMON
•
TL750L . . . KCS PACKAGE
(TOP VIEW)
OUTPUT
COMMON
INPUT
NC – No internal connection
COMMON
INPUT
TL750L . . . LP PACKAGE
(TO-92, TO-226AA)
(TOP VIEW)
INPUT
COMMON
OUTPUT
COMMON
INPUT
TL751L . . . D PACKAGE
(TOP VIEW)
OUTPUT
COMMON
COMMON
NC
OUTPUT
1
8
2
7
3
6
4
5
INPUT
COMMON
COMMON
ENABLE
NC – No internal connection
TL750L . . . KVU PACKAGE
(TOP VIEW)
OUTPUT
COMMON
OUTPUT
TL750L . . . KTT PACKAGE
(TOP VIEW)
COMMON
COMMON
TL750L . . . KTE PACKAGE
(TOP VIEW)
COMMON
INPUT
TL751L . . .P PACKAGE
(TOP VIEW)
OUTPUT
NC
NC
NC
1
8
2
7
3
6
4
5
INPUT
NC
COMMON
ENABLE
NC – No internal connection
DESCRIPTION/ORDERING INFORMATION
The TL750L and TL751L series of fixed-output voltage regulators offer 5-V, 8-V, 10-V, and 12-V options. The
TL751L series also has an enable (ENABLE) input. When ENABLE is high, the regulator output is placed in the
high-impedance state. This gives the designer complete control over power up, power down, or emergency
shutdown.
The TL750L and TL751L series are low-dropout positive-voltage regulators specifically designed for
battery-powered systems. These devices incorporate overvoltage and current-limiting protection circuitry, along
with internal reverse-battery protection circuitry to protect the devices and the regulated system. The series is
fully protected against 60-V load-dump and reverse-battery conditions. Extremely low quiescent current during
full-load conditions makes these devices ideal for standby power systems.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 1987–2009, Texas Instruments Incorporated
TL750L
TL751L
SLVS017U – SEPTEMBER 1987 – REVISED SEPTEMBER 2009.................................................................................................................................... www.ti.com
ORDERING INFORMATION (1)
TJ
VO TYP
AT 25°C
PACKAGE
PowerFLEX™ – KTE
0°C to 125°C
8V
10 V
TL750L05CKTER
TL750L05CD
Reel of 2500
TL750L05CDR
Tube of 75
TL751L05CD
Reel of 2500
TL751L05CDR
Bulk of 1000
TL750L05CLP
Reel of 2000
TL750L05CLPR
TO-220 – KC
Tube of 50
TL750L05CKC
TL750L05C
TO-220 – KCS
Tube of 50
TL750L05CKCS
TL750L05C
TO-252 – KVU
Reel of 2500
TL750L05CKVUR
750L05C
TO-263 – KTT
Reel of 500
TL750L05CKTTR
750L05C
Tube of 75
TL750L08CD
Reel of 2500
TL750L08CDR
TO-226/TO-92 – LP
Bulk of 1000
TL750L08CLP
750L08C
PDIP – P
Tube of 50
TL751L10CP
TL751L10C
Tube of 75
TL750L10CD
Reel of 2500
TL750L10CDR
Tube of 75
TL751L10CD
Reel of 2500
TL751L10CDR
Bulk of 1000
TL750L10CLP
Reel of 2000
TL750L10CLPR
Tube of 75
TL750L12CD
Reel of 2500
TL750L12CDR
Tube of 75
TL751L12CD
Reel of 2500
TL751L12CDR
Bulk of 1000
TL750L12CLP
TO-226/TO-92 – LP
SOIC – D
SOIC – D
SOIC – D
TO-226/TO-92 – LP
(1)
(2)
TOP-SIDE MARKING
Tube of 75
TO-226/TO-92 – LP
12 V
ORDERABLE PART NUMBER
Reel of 2000
SOIC – D
5V
(2)
TL750L05C
50L05C
51L05C
750L05C
50L08C
50L10C
51L10C
750L10C
50L12C
51L12C
750L12C
For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI
web site at www.ti.com.
Package drawings, thermal data, and symbolization are available at www.ti.com/packaging.
DEVICE COMPONENT COUNT
2
Submit Documentation Feedback
Transistors
20
JFETs
2
Diodes
5
Resistors
16
Copyright © 1987–2009, Texas Instruments Incorporated
TL750L
TL751L
www.ti.com.................................................................................................................................... SLVS017U – SEPTEMBER 1987 – REVISED SEPTEMBER 2009
Absolute Maximum Ratings (1)
over operating junction temperature range (unless otherwise noted)
MIN
Continuous input voltage
Transient input voltage
(2)
TA = 25°C
Continuous reverse input voltage
t ≤ 100 ms
Transient reverse input voltage
TJ
Operating virtual junction temperature
Lead temperature
Tstg
(1)
(2)
1,6 mm (1/16 in) for 10 s
Storage temperature range
–65
MAX
UNIT
26
V
60
V
–15
V
–50
V
150
°C
260
°C
150
°C
Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
The transient input voltage rating applies to the waveform shown in Figure 1.
Package Thermal Data (1)
(1)
PACKAGE
BOARD
θJC
θJA
PDIP (P)
High K, JESD 51-7
57°C/W
85°C/W
PowerFLEX™ (KTE)
High K, JESD 51-5
3°C/W
23°C/W
SOIC (D)
High K, JESD 51-7
39°C/W
97°C/W
TO-226/TO-92 (LP)
High K, JESD 51-7
55°C/W
140°C/W
TO-220 (KC)
High K, JESD 51-5
3°C/W
19°C/W
TO-220 (KCS)
High K, JESD 51-5
3°C/W
19°C/W
TO-252 (KVU)
High K, JESD 51-5
–
30.3°C/W
TO-263 (KTT)
High K, JESD 51-5
18°C/W
25.3°C/W
Maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any allowable ambient
temperature is PD = (TJ(max) – TA)/θJA. Operating at the absolute maximum TJ of 150°C can affect reliability.
Recommended Operating Conditions
over recommended operating junction temperature range (unless otherwise noted)
MIN
MAX
6
26
TL75xL08
9
26
TL75xL10
11
26
TL75xL12
13
26
TL75xLxx
2
15
TJ = 25°C
TL75xLxx
–0.3
0.8
TJ = 0°C to 125°C
TL75xLxx
–0.15
0.8
TL75xL05
VI
Input voltage
VIH
High-level ENABLE input voltage
VIL
(1)
Low-level ENABLE input voltage
UNIT
V
V
V
IO
Output current
TL75xLxx
0
150
mA
TJ
Operating virtual junction temperature
TL75xLxxC
0
125
°C
(1)
The algebraic convention, in which the least positive (most negative) value is designated minimum, is used in this data sheet for
ENABLE voltage levels and temperature only.
Copyright © 1987–2009, Texas Instruments Incorporated
Submit Documentation Feedback
3
TL750L
TL751L
SLVS017U – SEPTEMBER 1987 – REVISED SEPTEMBER 2009.................................................................................................................................... www.ti.com
TL75xL05 Electrical Characteristics (1)
VI = 14 V, IO = 10 mA, TJ = 25°C (unless otherwise noted)
PARAMETER
Output voltage
Input regulation voltage
VI = 6 V to 26 V, IO = 0 to 150 mA
TJ = 0°C to 125°C
TYP
4.8
5
4.75
VI = 6 V to 26 V
6
30
IO = 5 mA to 150 mA
60
65
20
0.2
IO = 150 mA
0.6
f = 10 Hz to 100 kHz
VI = 6 V to 26 V, IO = 10 mA, TJ = 0°C to 125°C
1
ENABLE ≥ 2 V
mV
mV
V
μV
500
10
V
dB
50
IO = 10 mA
IO = 150 mA
(1)
5.2
5.25
10
VI = 8 V to 18 V, f = 120 Hz
Quiescent current
UNIT
MAX
5
Output regulation voltage
Output noise voltage
TJ = 25°C
MIN
VI = 9 V to 16 V
Ripple rejection
Dropout voltage
TL750L05
TL751L05
TEST CONDITIONS
12
2
mA
0.5
Pulse-testing techniques are used to maintain the junction temperature as close to the ambient temperature as possible. Thermal effects
must be taken into account separately. All characteristics are measured with a 0.1-μF capacitor across the input and a 10-μF capacitor,
with equivalent series resistance of less than 0.4 Ω, across the output.
TL75xL08 Electrical Characteristics (1)
VI = 14 V, IO = 10 mA, TJ = 25°C (unless otherwise noted)
PARAMETER
Output voltage
Input regulation voltage
VI = 9 V to 26 V, IO = 0 to 150 mA
TJ = 0°C to 125°C
8
8.32
7.6
8.4
25
50
60
65
40
0.2
IO = 150 mA
0.6
f = 10 Hz to 100 kHz
VI = 9 V to 26 V, IO = 10 mA, TJ = 0°C to 125°C
ENABLE ≥ 2 V
1
mV
mV
V
μV
500
10
V
dB
80
IO = 10 mA
IO = 150 mA
4
7.68
VI = 9 V to 26 V
IO = 5 mA to 150 mA
(1)
MAX
20
VI = 11 V to 21 V, f = 120 Hz
Quiescent current
TYP
10
Output regulation voltage
Output noise voltage
TJ = 25°C
UNIT
MIN
VI = 10 V to 17 V
Ripple rejection
Dropout voltage
TL750L08
TL751L08
TEST CONDITIONS
12
2
mA
0.5
Pulse-testing techniques are used to maintain the junction temperature as close to the ambient temperature as possible. Thermal effects
must be taken into account separately. All characteristics are measured with a 0.1-μF capacitor across the input and a 10-μF capacitor,
with equivalent series resistance of less than 0.4 Ω, across the output.
Submit Documentation Feedback
Copyright © 1987–2009, Texas Instruments Incorporated
TL750L
TL751L
www.ti.com.................................................................................................................................... SLVS017U – SEPTEMBER 1987 – REVISED SEPTEMBER 2009
TL75xL10 Electrical Characteristics (1)
VI = 14 V, IO = 10 mA, TJ = 25°C (unless otherwise noted)
PARAMETER
Output voltage
Input regulation voltage
VI = 11 V to 26 V, IO = 0 to 150 mA
TYP
MAX
TJ = 25°C
9.6
10
10.4
TJ = 0°C to 125°C
9.5
25
VI = 11 V to 26 V
30
60
VI = 12 V to 22 V, f = 120 Hz
IO = 5 mA to 150 mA
60
65
50
0.2
IO = 150 mA
0.6
f = 10 Hz to 100 kHz
VI = 11 V to 26 V, IO = 10 mA, TJ = 0°C to 125°C
1
ENABLE ≥ 2 V
(1)
mV
mV
V
μV
700
10
V
dB
100
IO = 10 mA
IO = 150 mA
Quiescent current
10.5
10
Output regulation voltage
Output noise voltage
UNIT
MIN
VI = 12 V to 19 V
Ripple rejection
Dropout voltage
TL750L10
TL751L10
TEST CONDITIONS
12
2
mA
0.5
Pulse-testing techniques are used to maintain the junction temperature as close to the ambient temperature as possible. Thermal effects
must be taken into account separately. All characteristics are measured with a 0.1-μF capacitor across the input and a 10-μF capacitor,
with equivalent series resistance of less than 0.4 Ω, across the output.
TL75xL12 Electrical Characteristics (1)
VI = 14 V, IO = 10 mA, TJ = 25°C (unless otherwise noted)
PARAMETER
Output voltage
Input regulation voltage
VI = 13 V to 26 V, IO = 0 to 150 mA
TJ = 0°C to 125°C
TYP
MAX
11.52
12
12.48
11.4
30
VI = 13 V to 26 V
20
40
VI = 13 V to 23 V, f = 120 Hz
IO = 5 mA to 150 mA
50
0.2
IO = 150 mA
0.6
f = 10 Hz to 100 kHz
VI = 13 V to 26 V, IO = 10 mA, TJ = 0°C to 125°C
1
mV
mV
V
μV
700
10
V
dB
120
IO = 10 mA
ENABLE ≥ 2 V
(1)
55
50
IO = 150 mA
Quiescent current
12.6
15
Output regulation voltage
Output noise voltage
TJ = 25°C
UNIT
MIN
VI = 14 V to 19 V
Ripple rejection
Dropout voltage
TL750L12
TL751L12
TEST CONDITIONS
12
2
mA
0.5
Pulse-testing techniques are used to maintain the junction temperature as close to the ambient temperature as possible. Thermal effects
must be taken into account separately. All characteristics are measured with a 0.1-μF capacitor across the input and a 10-μF capacitor,
with equivalent series resistance of less than 0.4 Ω, across the output.
PARAMETER MEASUREMENT INFORMATION
The TL750L, TL751L series are low-dropout regulators. This means that capacitance loading is important to the
performance of the regulator because it is a vital part of the control loop. The capacitor value and its equivalent
series resistance (ESR) both affect the control loop and must be defined for the load range and temperature
range. Figure 1 shows the recommended range of ESR for a given load with a 10-μF capacitor on the output.
Copyright © 1987–2009, Texas Instruments Incorporated
Submit Documentation Feedback
5
TL750L
TL751L
SLVS017U – SEPTEMBER 1987 – REVISED SEPTEMBER 2009.................................................................................................................................... www.ti.com
TYPICAL CHARACTERISTICS
TL750L05
EQUIVALENT SERIES RESISTANCE
vs
LOAD CURRENT
TRANSIENT INPUT VOLTAGE
vs
TIME
60
0.9
0.8
Potential Instability Region
0.7
0.6
0.5
0.4
0.3
Region of Best Stability
0.2
0.1
0.024
0
TA = 25°C
VI = 14 V + 46e(−t/0.230)
for t ≥ 5 ms
CL = 10-µF Tantalum Capacitor
TA = − 40°C to 125°C
V i − Transient Input Voltage − V
ESR − Equivalent Series Resistance − Ω
1.0
50
ÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎ
40
30
tr = 1 ms
20
10
0
Potential Instability Region
10
80
120
0
0
150
100
200
300
400
500
600
t − Time − ms
IL − Load Current − mA
Figure 1.
Figure 2.
TL750L05
INPUT CURRENT
vs
INPUT VOLTAGE
TL750L12
INPUT CURRENT
vs
INPUT VOLTAGE
60
40
35
50
II − Input Current − mA
II − Input Current − mA
30
25
20
15
40
30
20
10
10
5
0
0
0
1
2
3
4
VI − Input Voltage − V
Figure 3.
6
Submit Documentation Feedback
5
6
0
2
4
6
8
10
12
14
VI − Input Voltage − V
Figure 4.
Copyright © 1987–2009, Texas Instruments Incorporated
PACKAGE OPTION ADDENDUM
www.ti.com
21-Apr-2012
PACKAGING INFORMATION
Orderable Device
Status
(1)
Package Type Package
Drawing
Pins
Package Qty
Eco Plan
(2)
Lead/
Ball Finish
MSL Peak Temp
(3)
(Requires Login)
5962-9166901Q2A
OBSOLETE
LCCC
FK
20
TBD
Call TI
Call TI
5962-9166901QPA
OBSOLETE
CDIP
JG
8
TBD
Call TI
Call TI
TL750L05CD
ACTIVE
SOIC
D
8
75
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-1-260C-UNLIM
TL750L05CDE4
ACTIVE
SOIC
D
8
75
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-1-260C-UNLIM
TL750L05CDG4
ACTIVE
SOIC
D
8
75
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-1-260C-UNLIM
TL750L05CDR
ACTIVE
SOIC
D
8
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-1-260C-UNLIM
TL750L05CDRE4
ACTIVE
SOIC
D
8
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-1-260C-UNLIM
TL750L05CDRG4
ACTIVE
SOIC
D
8
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-1-260C-UNLIM
TL750L05CKC
OBSOLETE
TO-220
KC
3
TBD
Call TI
Call TI
TL750L05CKCE3
OBSOLETE
TO-220
KC
3
TBD
Call TI
Call TI
TL750L05CKCS
ACTIVE
TO-220
KCS
3
50
Pb-Free (RoHS)
CU SN
N / A for Pkg Type
TL750L05CKCSE3
ACTIVE
TO-220
KCS
3
50
Pb-Free (RoHS)
CU SN
N / A for Pkg Type
TL750L05CKTER
OBSOLETE
PFM
KTE
3
TBD
Call TI
Call TI
TL750L05CKTTR
ACTIVE
DDPAK/
TO-263
KTT
3
500
Green (RoHS
& no Sb/Br)
CU SN
Level-3-245C-168 HR
TL750L05CKTTRG3
ACTIVE
DDPAK/
TO-263
KTT
3
500
Green (RoHS
& no Sb/Br)
CU SN
Level-3-245C-168 HR
TL750L05CKVURG3
ACTIVE
PFM
KVU
3
2500
Green (RoHS
& no Sb/Br)
CU SN
Level-3-260C-168 HR
TL750L05CLP
ACTIVE
TO-92
LP
3
1000
Pb-Free (RoHS)
CU SN
N / A for Pkg Type
TL750L05CLPE3
ACTIVE
TO-92
LP
3
1000
Pb-Free (RoHS)
CU SN
N / A for Pkg Type
TL750L05CLPM
OBSOLETE
TO-92
LP
3
TBD
Call TI
Call TI
TL750L05CLPR
ACTIVE
TO-92
LP
3
2000
Pb-Free (RoHS)
CU SN
N / A for Pkg Type
TL750L05CLPRE3
ACTIVE
TO-92
LP
3
2000
Pb-Free (RoHS)
CU SN
N / A for Pkg Type
TL750L05CP
OBSOLETE
PDIP
P
8
TBD
Call TI
Call TI
TL750L05QD
OBSOLETE
SOIC
D
8
TBD
Call TI
Call TI
Addendum-Page 1
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
Orderable Device
21-Apr-2012
Status
(1)
Package Type Package
Drawing
Pins
Package Qty
Eco Plan
(2)
Lead/
Ball Finish
MSL Peak Temp
(3)
TL750L05QDR
OBSOLETE
SOIC
D
8
TBD
Call TI
Call TI
TL750L05QKC
OBSOLETE
TO-220
KC
3
TBD
Call TI
Call TI
TL750L05QLP
OBSOLETE
TO-92
LP
3
TBD
Call TI
Call TI
TL750L05QP
OBSOLETE
PDIP
P
8
Call TI
Call TI
TL750L08CD
ACTIVE
SOIC
D
8
75
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-2-260C-1 YEAR
TL750L08CDE4
ACTIVE
SOIC
D
8
75
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-2-260C-1 YEAR
TL750L08CDG4
ACTIVE
SOIC
D
8
75
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-2-260C-1 YEAR
TL750L08CDR
ACTIVE
SOIC
D
8
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-2-260C-1 YEAR
TL750L08CDRE4
ACTIVE
SOIC
D
8
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-2-260C-1 YEAR
TL750L08CDRG4
ACTIVE
SOIC
D
8
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-2-260C-1 YEAR
TL750L08CKC
OBSOLETE
TO-220
KC
3
TBD
TBD
Call TI
Call TI
TL750L08CLP
ACTIVE
TO-92
LP
3
1000
Pb-Free (RoHS)
CU SN
N / A for Pkg Type
TL750L08CLPE3
ACTIVE
TO-92
LP
3
1000
Pb-Free (RoHS)
CU SN
N / A for Pkg Type
TL750L08CP
OBSOLETE
PDIP
P
8
TBD
Call TI
Call TI
TL750L08QD
OBSOLETE
SOIC
D
8
TBD
Call TI
Call TI
TL750L08QDR
OBSOLETE
SOIC
D
8
TBD
Call TI
Call TI
TL750L08QKC
OBSOLETE
TO-220
KC
3
TBD
Call TI
Call TI
TL750L08QLP
OBSOLETE
TO-92
LP
3
Call TI
Call TI
TL750L10CD
ACTIVE
SOIC
D
8
75
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-1-260C-UNLIM
TL750L10CDE4
ACTIVE
SOIC
D
8
75
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-1-260C-UNLIM
TL750L10CDG4
ACTIVE
SOIC
D
8
75
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-1-260C-UNLIM
TL750L10CDR
ACTIVE
SOIC
D
8
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-1-260C-UNLIM
TL750L10CDRE4
ACTIVE
SOIC
D
8
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-1-260C-UNLIM
TBD
Addendum-Page 2
Samples
(Requires Login)
PACKAGE OPTION ADDENDUM
www.ti.com
Orderable Device
21-Apr-2012
Status
(1)
Package Type Package
Drawing
Pins
TL750L10CDRG4
ACTIVE
SOIC
D
8
TL750L10CKC
OBSOLETE
TO-220
KC
3
Package Qty
2500
Eco Plan
(2)
Green (RoHS
& no Sb/Br)
Lead/
Ball Finish
MSL Peak Temp
Samples
(Requires Login)
CU NIPDAU Level-1-260C-UNLIM
TBD
Call TI
Call TI
TL750L10CLP
ACTIVE
TO-92
LP
3
1000
Pb-Free (RoHS)
CU SN
N / A for Pkg Type
TL750L10CLPE3
ACTIVE
TO-92
LP
3
1000
Pb-Free (RoHS)
CU SN
N / A for Pkg Type
TL750L10CLPR
ACTIVE
TO-92
LP
3
2000
Pb-Free (RoHS)
CU SN
N / A for Pkg Type
TL750L10CLPRE3
ACTIVE
TO-92
LP
3
2000
Pb-Free (RoHS)
CU SN
N / A for Pkg Type
TL750L10CP
OBSOLETE
PDIP
P
8
TBD
Call TI
Call TI
TL750L10QD
OBSOLETE
SOIC
D
8
TBD
Call TI
Call TI
TL750L10QDR
OBSOLETE
SOIC
D
8
TBD
Call TI
Call TI
TL750L10QKC
OBSOLETE
TO-220
KC
3
TBD
Call TI
Call TI
TL750L10QLP
OBSOLETE
TO-92
LP
3
TBD
Call TI
Call TI
TL750L10QP
OBSOLETE
PDIP
P
8
TBD
Call TI
Call TI
TL750L12CD
ACTIVE
SOIC
D
8
75
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-1-260C-UNLIM
TL750L12CDE4
ACTIVE
SOIC
D
8
75
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-1-260C-UNLIM
TL750L12CDG4
ACTIVE
SOIC
D
8
75
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-1-260C-UNLIM
TL750L12CDR
ACTIVE
SOIC
D
8
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-1-260C-UNLIM
TL750L12CDRE4
ACTIVE
SOIC
D
8
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-1-260C-UNLIM
TL750L12CDRG4
ACTIVE
SOIC
D
8
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-1-260C-UNLIM
TL750L12CKC
OBSOLETE
TO-220
KC
3
TBD
Call TI
Call TI
TL750L12CLP
ACTIVE
TO-92
LP
3
1000
Pb-Free (RoHS)
CU SN
N / A for Pkg Type
TL750L12CLPE3
ACTIVE
TO-92
LP
3
1000
Pb-Free (RoHS)
CU SN
N / A for Pkg Type
TL750L12CP
OBSOLETE
PDIP
P
8
TBD
Call TI
Call TI
TL750L12QD
OBSOLETE
SOIC
D
8
TBD
Call TI
Call TI
TL750L12QDR
OBSOLETE
SOIC
D
8
TBD
Call TI
Call TI
TL750L12QKC
OBSOLETE
TO-220
KC
3
TBD
Call TI
Call TI
TL750L12QLP
OBSOLETE
TO-92
LP
3
TBD
Call TI
Call TI
Addendum-Page 3
(3)
PACKAGE OPTION ADDENDUM
www.ti.com
Orderable Device
21-Apr-2012
Status
(1)
Package Type Package
Drawing
Pins
Package Qty
Eco Plan
(2)
TBD
Lead/
Ball Finish
Call TI
MSL Peak Temp
OBSOLETE
SOIC
D
8
TL751L05CD
ACTIVE
SOIC
D
8
75
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-1-260C-UNLIM
TL751L05CDE4
ACTIVE
SOIC
D
8
75
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-1-260C-UNLIM
TL751L05CDG4
ACTIVE
SOIC
D
8
75
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-1-260C-UNLIM
TL751L05CDR
ACTIVE
SOIC
D
8
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-1-260C-UNLIM
TL751L05CDRE4
ACTIVE
SOIC
D
8
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-1-260C-UNLIM
TL751L05CDRG4
ACTIVE
SOIC
D
8
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-1-260C-UNLIM
Call TI
TL751L05CP
OBSOLETE
PDIP
P
8
TBD
Call TI
Call TI
TL751L05MFKB
OBSOLETE
LCCC
FK
20
TBD
Call TI
Call TI
TL751L05MJGB
OBSOLETE
CDIP
JG
8
TBD
Call TI
Call TI
TL751L05QD
OBSOLETE
SOIC
D
8
TBD
Call TI
Call TI
TL751L05QDR
OBSOLETE
SOIC
D
8
TBD
Call TI
Call TI
TL751L05QP
OBSOLETE
PDIP
P
8
TBD
Call TI
Call TI
TL751L10CD
ACTIVE
SOIC
D
8
75
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-1-260C-UNLIM
TL751L10CDE4
ACTIVE
SOIC
D
8
75
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-1-260C-UNLIM
TL751L10CDG4
ACTIVE
SOIC
D
8
75
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-1-260C-UNLIM
TL751L10CDR
ACTIVE
SOIC
D
8
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-1-260C-UNLIM
TL751L10CDRE4
ACTIVE
SOIC
D
8
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-1-260C-UNLIM
TL751L10CDRG4
ACTIVE
SOIC
D
8
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-1-260C-UNLIM
TL751L10CP
ACTIVE
PDIP
P
8
50
Pb-Free (RoHS)
CU NIPDAU N / A for Pkg Type
TL751L10CPE4
ACTIVE
PDIP
P
8
50
Pb-Free (RoHS)
CU NIPDAU N / A for Pkg Type
TL751L10QD
OBSOLETE
SOIC
D
8
Addendum-Page 4
Call TI
Samples
(Requires Login)
TL750L12QP
TBD
(3)
Call TI
PACKAGE OPTION ADDENDUM
www.ti.com
Orderable Device
21-Apr-2012
Status
(1)
Package Type Package
Drawing
Pins
Package Qty
Eco Plan
(2)
TBD
Lead/
Ball Finish
Call TI
MSL Peak Temp
(3)
Samples
(Requires Login)
TL751L10QP
OBSOLETE
PDIP
P
8
Call TI
TL751L12CD
ACTIVE
SOIC
D
8
75
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-1-260C-UNLIM
TL751L12CDE4
ACTIVE
SOIC
D
8
75
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-1-260C-UNLIM
TL751L12CDG4
ACTIVE
SOIC
D
8
75
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-1-260C-UNLIM
TL751L12CDR
ACTIVE
SOIC
D
8
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-1-260C-UNLIM
TL751L12CDRE4
ACTIVE
SOIC
D
8
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-1-260C-UNLIM
TL751L12CDRG4
ACTIVE
SOIC
D
8
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-1-260C-UNLIM
TL751L12CP
OBSOLETE
PDIP
P
8
TBD
Call TI
Call TI
TL751L12MFKB
OBSOLETE
LCCC
FK
20
TBD
Call TI
Call TI
TL751L12MJGB
OBSOLETE
CDIP
JG
8
TBD
Call TI
Call TI
TL751L12QD
OBSOLETE
SOIC
D
8
TBD
Call TI
Call TI
TL751L12QDR
OBSOLETE
SOIC
D
8
TBD
Call TI
Call TI
TL751L12QP
OBSOLETE
PDIP
P
8
TBD
Call TI
Call TI
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
Addendum-Page 5
PACKAGE OPTION ADDENDUM
www.ti.com
(3)
21-Apr-2012
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
Addendum-Page 6
PACKAGE MATERIALS INFORMATION
www.ti.com
20-Apr-2012
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device
Package Package Pins
Type Drawing
SPQ
Reel
Reel
A0
Diameter Width (mm)
(mm) W1 (mm)
B0
(mm)
K0
(mm)
P1
(mm)
W
Pin1
(mm) Quadrant
TL750L05CDR
SOIC
D
8
2500
330.0
12.4
6.4
5.2
2.1
8.0
12.0
Q1
TL750L05CKTTR
DDPAK/
TO-263
KTT
3
500
330.0
24.4
10.6
15.8
4.9
16.0
24.0
Q2
TL750L05CKVURG3
PFM
KVU
3
2500
330.0
16.4
6.9
10.5
2.7
8.0
16.0
Q2
TL750L08CDR
SOIC
D
8
2500
330.0
12.4
6.4
5.2
2.1
8.0
12.0
Q1
TL750L10CDR
SOIC
D
8
2500
330.0
12.4
6.4
5.2
2.1
8.0
12.0
Q1
TL750L12CDR
SOIC
D
8
2500
330.0
12.4
6.4
5.2
2.1
8.0
12.0
Q1
TL751L05CDR
SOIC
D
8
2500
330.0
12.4
6.4
5.2
2.1
8.0
12.0
Q1
TL751L10CDR
SOIC
D
8
2500
330.0
12.4
6.4
5.2
2.1
8.0
12.0
Q1
TL751L12CDR
SOIC
D
8
2500
330.0
12.4
6.4
5.2
2.1
8.0
12.0
Q1
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
20-Apr-2012
*All dimensions are nominal
Device
Package Type
Package Drawing
Pins
SPQ
Length (mm)
Width (mm)
Height (mm)
TL750L05CDR
SOIC
D
8
2500
340.5
338.1
20.6
TL750L05CKTTR
DDPAK/TO-263
KTT
3
500
340.0
340.0
38.0
TL750L05CKVURG3
PFM
KVU
3
2500
340.0
340.0
38.0
TL750L08CDR
SOIC
D
8
2500
340.5
338.1
20.6
TL750L10CDR
SOIC
D
8
2500
340.5
338.1
20.6
TL750L12CDR
SOIC
D
8
2500
340.5
338.1
20.6
TL751L05CDR
SOIC
D
8
2500
340.5
338.1
20.6
TL751L10CDR
SOIC
D
8
2500
340.5
338.1
20.6
TL751L12CDR
SOIC
D
8
2500
340.5
338.1
20.6
Pack Materials-Page 2
MECHANICAL DATA
MCER001A – JANUARY 1995 – REVISED JANUARY 1997
JG (R-GDIP-T8)
CERAMIC DUAL-IN-LINE
0.400 (10,16)
0.355 (9,00)
8
5
0.280 (7,11)
0.245 (6,22)
1
0.063 (1,60)
0.015 (0,38)
4
0.065 (1,65)
0.045 (1,14)
0.310 (7,87)
0.290 (7,37)
0.020 (0,51) MIN
0.200 (5,08) MAX
Seating Plane
0.130 (3,30) MIN
0.023 (0,58)
0.015 (0,38)
0°–15°
0.100 (2,54)
0.014 (0,36)
0.008 (0,20)
4040107/C 08/96
NOTES: A.
B.
C.
D.
E.
All linear dimensions are in inches (millimeters).
This drawing is subject to change without notice.
This package can be hermetically sealed with a ceramic lid using glass frit.
Index point is provided on cap for terminal identification.
Falls within MIL STD 1835 GDIP1-T8
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
MECHANICAL DATA
MPFM001E – OCTOBER 1994 – REVISED JANUARY 2001
KTE (R-PSFM-G3)
PowerFLEX PLASTIC FLANGE-MOUNT
0.375 (9,52)
0.080 (2,03)
0.070 (1,78)
0.365 (9,27)
0.360 (9,14)
0.050 (1,27)
0.040 (1,02)
0.350 (8,89)
0.220 (5,59)
NOM
0.010 (0,25) NOM
Thermal Tab
(See Note C)
0.360 (9,14)
0.350 (8,89)
0.295 (7,49)
NOM
0.320 (8,13)
0.310 (7,87)
0.420 (10,67)
0.410 (10,41)
1
3
0.025 (0,63)
0.031 (0,79)
0.100 (2,54)
Seating Plane
0.004 (0,10)
0.010 (0,25) M
0.005 (0,13)
0.001 (0,03)
0.200 (5,08)
0.041 (1,04)
0.031 (0,79)
0.010 (0,25)
NOM
Gage Plane
3°– 6°
0.010 (0,25)
4073375/F 12/00
NOTES: A.
B.
C.
D.
E.
All linear dimensions are in inches (millimeters).
This drawing is subject to change without notice.
The center lead is in electrical contact with the thermal tab.
Dimensions do not include mold protrusions, not to exceed 0.006 (0,15).
Falls within JEDEC MO-169
PowerFLEX is a trademark of Texas Instruments.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
1
MECHANICAL DATA
MSOT002A – OCTOBER 1994 – REVISED NOVEMBER 2001
LP (O-PBCY-W3)
PLASTIC CYLINDRICAL PACKAGE
0.205 (5,21)
0.175 (4,44)
0.165 (4,19)
0.125 (3,17)
DIA
0.210 (5,34)
0.170 (4,32)
Seating
Plane
0.157 (4,00) MAX
0.050 (1,27)
C
0.500 (12,70) MIN
0.104 (2,65)
FORMED LEAD OPTION
0.022 (0,56)
0.016 (0,41)
0.016 (0,41)
0.014 (0,35)
STRAIGHT LEAD OPTION
D
0.135 (3,43) MIN
0.105 (2,67)
0.095 (2,41)
0.055 (1,40)
0.045 (1,14)
1
2
3
0.105 (2,67)
0.080 (2,03)
0.105 (2,67)
0.080 (2,03)
4040001-2 /C 10/01
NOTES: A. All linear dimensions are in inches (millimeters).
B. This drawing is subject to change without notice.
C. Lead dimensions are not controlled within this area
D. FAlls within JEDEC TO -226 Variation AA (TO-226 replaces TO-92)
E. Shipping Method:
Straight lead option available in bulk pack only.
Formed lead option available in tape & reel or ammo pack.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
1
MECHANICAL DATA
MSOT002A – OCTOBER 1994 – REVISED NOVEMBER 2001
LP (O-PBCY-W3)
PLASTIC CYLINDRICAL PACKAGE
0.539 (13,70)
0.460 (11,70)
1.260 (32,00)
0.905 (23,00)
0.650 (16,50)
0.610 (15,50)
0.020 (0,50) MIN
0.098 (2,50)
0.384 (9,75)
0.335 (8,50)
0.748 (19,00)
0.217 (5,50)
0.433 (11,00)
0.335 (8,50)
0.748 (19,00)
0.689 (17,50)
0.114 (2,90)
0.094 (2,40)
0.114 (2,90)
0.094 (2,40)
0.169 (4,30)
0.146 (3,70)
DIA
0.266 (6,75)
0.234 (5,95)
0.512 (13,00)
0.488 (12,40)
TAPE & REEL
4040001-3 /C 10/01
NOTES: A. All linear dimensions are in inches (millimeters).
B. This drawing is subject to change without notice.
C. Tape and Reel information for the Format Lead Option package.
2
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest
issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale
supplied at the time of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components which meet ISO/TS16949 requirements, mainly for automotive use. Components which
have not been so designated are neither designed nor intended for automotive use; and TI will not be responsible for any failure of such
components to meet such requirements.
Products
Applications
Audio
www.ti.com/audio
Automotive and Transportation
www.ti.com/automotive
Amplifiers
amplifier.ti.com
Communications and Telecom
www.ti.com/communications
Data Converters
dataconverter.ti.com
Computers and Peripherals
www.ti.com/computers
DLP® Products
www.dlp.com
Consumer Electronics
www.ti.com/consumer-apps
DSP
dsp.ti.com
Energy and Lighting
www.ti.com/energy
Clocks and Timers
www.ti.com/clocks
Industrial
www.ti.com/industrial
Interface
interface.ti.com
Medical
www.ti.com/medical
Logic
logic.ti.com
Security
www.ti.com/security
Power Mgmt
power.ti.com
Space, Avionics and Defense
www.ti.com/space-avionics-defense
Microcontrollers
microcontroller.ti.com
Video and Imaging
www.ti.com/video
RFID
www.ti-rfid.com
OMAP Applications Processors
www.ti.com/omap
TI E2E Community
e2e.ti.com
Wireless Connectivity
www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2012, Texas Instruments Incorporated