Frontier Electronics Corp. 667 E. COCHRAN STREET, SIMI VALLEY, CA 93065 TEL: (805) 522-9998 FAX: (805) 522-9989 E-mail: [email protected] Web: http://www.frontierusa.com 6A SUPER FAST RECOVERY RECTIFIER SF60-005 THRU SF60-06 FEATURES z SUPER FAST SWITCHING z LOW FORWARD VOLTAGE z HIGH CURRENT CAPABILITY z HIGH SURGE CAPABILITY z HIGH RELIABILITY 1.0(25.4) MIN .052(1.3) .048(1.2) .375(9.5) .335(8.5) MECHANICAL DATA z CASE: MOLDED PLASTIC, DO201AD, DIMENSIONS IN INCHES AND (MILLIMETERS) z EPOXY: UL 94V-0 MOLDING COMPOUND z LEAD: MIL-STD-202E, METHOD 208C GUARANTEED z MOUNTING POSITION: ANY z WEIGHT: 1.2 GRAMS .220(5.6) .197(5.0) 1.0(25.4) MIN MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS RATINGS AT 25°C AMBIENT TEMPERATURE UNLESS OTHERWISE SPECIFIED SINGLE PHASE, HALF WAVE, 60 HZ, RESISTIVE OR INDUCTIVE LOAD. FOR CAPACITIVE LOAD, DERATE CURRENT BY 20% SF60 SF60 SF60 SF60 SF60 SF60 SF60 SF60 UNITS RATINGS SYMBOL -005 -01 -015 -02 -03 -04 -05 -06 MAXIMUM RECURRENT PEAK REVERSE VOLTAGE VRRM 50 100 150 200 300 400 500 600 V MAXIMUM RMS VOLTAGE VRMS 35 70 105 140 210 280 350 420 V MAXIMUM DC BLOCKING VOLTAGE VDC 50 100 150 200 300 400 500 600 V MAXIMUM AVERAGE FORWARD RECTIFIED CURRENT IO 6.0 A 0.375”(9.5mm) LEAD LENGTH AT TA=55°C PEAK FORWARD SURGE CURRENT, 8.3ms SINGLE HALF IFSM 150 A SINE-WAVE SUPERIMPOSED ON RATED LOAD TYPICAL JUNCTION CAPACITANCE (NOTE 1) CJ 170 PF TYPICAL THERMAL RESISTANCE (NOTE 2) Rθja 20 ℃/W STORAGE TEMPERATURE RANGE TSTG - 55 TO + 150 ℃ OPERATING TEMPERATURE RANGE TOP - 55 TO + 150 ℃ ELECTRICAL CHARACTERISTICS (AT TA =25°C UNLESS OTHERWISE NOTED) SF60 CHARACTERISTICS SYMBOL -005 MAXIMUM FORWARD VOLTAGE AT IO DC VF SF60 SF60 -01 -015 0.95 SF60 -02 SF60 SF60 -03 -04 1.25 SF60 SF60 -05 -06 1.85 UNITS V MAXIMUM REVERSE CURRENT AT 25℃ IR 10 μA MAXIMUM REVERSE CURRENT AT 100℃ IR 100 μA MAXIMUM REVERSE RECOVERY TIME (NOTE 3) TRR 35 NOTE: 1. MEASURED AT 1 MHZ AND APPLIED REVERSE VOLTAGE 0F 4.0 VOLTS 2. BOTH LEADS ATTACHED TO HEAT SINK 20x20x1t(mm) COPPER PLATE AT LEAD LENGTH 5mm 3. REVERSE RECOVERY TEST CONDITIONS: IF=0.5A, IR=1.0A, IRR=0.25A nS SF60-005 THRU SF60-06 Page: 1 RATINGS AND CHARACTERISTIC CURVE SF60-005 THRU SF60-06 FIG. 1-TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTIC 100Ω NO INDUCTIVE Trr (-) +0.5A D.U.T. PULSE GENERATOR ( NOTE 2 ) (+) 25 Vdc (approx) 1Ω NON INDUCTIVE (-) OSCILLOSCOPE ( NOTE 1 ) FIG. 2-TYPICAL FORWARD CURRENT DERATING CURVE (+) 6.0 AVERAGE FORWARD CURRENT (A) 50Ω NO INDUCTIVE 0 -0.25A -1.0A NOTE: 1. RISE TIME=7ns MAX. INPUT IMPEDANCE=1 MOhms 22PF 2. RISE TIME =10ns MAX. SOURCE IMPEDANCE=50 OHMS 1cm 4.0 3.0 2.0 1.0 Single Phase Half Wave 60 Hz Resistive or Inductive Load 0 25 50 75 100 125 150 175 AMBIENT TEMPERATURE (oC) SET TIME BASE FOR 10/20 ns/cm FIG. 4-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG. 3-TYPICAL REVERSE CHARACTERISTICS 1000 100.0 INSTANTANEOUS FORWARD CURRENT (A) INSTANTANEOUS REVERSE CURRENT (uA) 5.0 100 10 TJ=25oC 1.0 0.1 20 40 60 80 100 120 140 SF60-005~60-02 10.0 1.0 SF60 05 60 06 SF60-03~60-04 .1 TJ=25oC Pulse Width=300us 1% Duty Cycle .01 .6 .8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 INSTANTANEOUS FORWARD VOLTAGE (V) PERCENT OF RATED PEAK REVERSE VOLTAGE (%) FIG. 5-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT FIG. 6-TYPICAL JUNCTION CAPACITANCE 300 200 8.3 ms Single Half Sine Wave (JEDEC Method) 150 JUNCTION CAPACITANCE (pF) PEAK FORWARD SURGE CURRENT (A) 175 100 50 160 140 120 100 TJ=25oC 60 40 20 10 0 .1 1 2 5 10 20 50 NUMBER OF CYCLES AT 60HZ SF60-005 THRU SF60-06 100 .2 .4 1.0 2 4 10 20 REVERSE VOLTAGE, (V) 40 100 Page: 2