Frontier Electronics Corp. 667 E. COCHRAN STREET, SIMI VALLEY, CA 93065 TEL: (805) 522-9998 FAX: (805) 522-9989 E-mail: [email protected] Web: http://www.frontierusa.com 1A SURFACE MOUNT SUPER FAST RECOVERY RECTIFIERS SFM11M-LFR THRU SFM19M-LFR FEATURES z FOR SURFACE MOUNTED APPLICATIONS z LOW PROFILE PACKAGE z BUILT-IN STRAIN RELIEF z EASY PICK AND PLACE z PLASTIC MATERIAL USED CARRIES UNDERWRITERS LABORATORY CLASSIFICATION 94 V-0 z SUPER FAST SWITCHING z GLASS PASSIVATED CHIP JUNCTION z HIGH TEMPERATURE SOLDERING: 250°C/10 SECONDS AT TERMINALS z ROHS .161(4.1) .146(3.7) .071(1.8 ) .055(1.4 ) .0012(0.3) Typ. .126(3.2) .110(2.8) MECHANICAL DATA z CASE: MOLDED PLASTIC, SOD-123, DIMENSIONS IN INCHES .063(1.6) .055(1.4) AND (MILLIMETERS) z TERMINALS: SOLDER PLATED z POLARITY: INDICATED BY CATHODE BAND z WEIGHT: 0.04 GRAMS .035(0.9) Typ. .035(0.9) Typ. MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS RATINGS AT 25°C AMBIENT TEMPERATURE UNLESS OTHERWISE SPECIFIED SINGLE PHASE, HALF WAVE, 60 HZ, RESISTIVE OR INDUCTIVE LOAD. FOR CAPACITIVE LOAD, DERATE CURRENT BY 20% RATINGS SYMBOL MAXIMUM RECURRENT PEAK REVERSE VOLTAGE MAXIMUM RMS VOLTAGE MAXIMUM DC BLOCKING VOLTAGE MAXIMUM AVERAGE FORWARD RECTIFIED CURRENT AT TL=90°C MAXIMUM OVERLOAD SURGE 8.3ms SINGLE HALF SINE-WAVE TYPICAL JUNCTION CAPACITANCE (NOTE 1) TYPICAL THERMAL RESISTANCE (NOTE 2) VRRM VRMS VDC STORAGE TEMPERATURE RANGE TSTG OPERATING TEMPERATURE RANGE TOP SFM11M SFM12M SFM13M SFM14M SFM15M SFM16M SFM18M SFM19M UNITS -LFR -LFR -LFR -LFR -LFR -LFR -LFR -LFR 50 35 50 100 70 100 150 105 150 200 140 200 300 210 300 400 280 400 600 420 600 800 560 800 V V V IO 1.0 A IFSM 30 A 15 CJ θJL 10 PF °C/W °C °C 30 -55 TO + 150 -55 TO + 125 ELECTRICAL CHARACTERISTICS (AT TA =25°C UNLESS OTHERWISE NOTED) CHARACTERISTICS SYMBOL MAXIMUM FORWARD VOLTAGE AT 1.0A AND 25℃ VF MAXIMUM REVERSE CURRENT AT 25℃ IR SFM11M SFM12M SFM13M SFM14M SFM15M SFM16M SFM18M SFM19M UNITS -LFR -LFR -LFR -LFR -LFR -LFR -LFR -LFR 0.95 1.25 MAXIMUM REVERSE RECOVERY TIME (NOTE 3) TRR 35 MARKING S1 S2 S3 S4 S5 NOTE: 1. MEASURED AT 1.0 MHZ AND APPLIED REVERSE VOLTAGE OF 4.0 V 2. THERMAL RESISTANCE FROM JUNCTION TO TERMINAL 5.0mm2 (.013 mm THICK) LAND AREAS 3. REVERSE RECOVERY TEST CONDITIONS: IF=0.5A, IR=1.0A, IRR=0.25A SFM11M-LFR THRU SFM19M-LFR 1.85 V μA 5 nS S6 S8 S9 Page: 1 RATINGS AND CHARACTERISTIC CURVE SFM11M-LFR THRU SFM19M-LFR FIG. 1-TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTIC 100Ω NO INDUCTIVE FIG. 2-TYPICAL FORWARD Trr 2.0 +0.5A PULSE GENERATOR ( NOTE 2 ) (+) 25 Vdc (approx) (-) 1Ω NON INDUCTIVE 0 OSCILLOSCOPE (+) -0.25A ( NOTE 1 ) NOTE: 1. RISE TIME=7ns MAX. INPUT IMPEDANCE=1 MOhms 22PF 2. RISE TIME =10ns MAX. SOURCE IMPEDANCE=50 OHMS CURRENT (A) (-) D.U.T. CURRENT DERATING CURVE AVERAGE FORWARD 50Ω NO INDUCTIVE P.C.B MOUNTED ON 0.3×0.3”(8.0×8.0mm) COPPER PAD AREAS 1.0 Single Phase Half Wave 60 Hz Resistive or Inductive Load 0 25 50 75 100 125 150 175 LEAD TEMPERATURE (oC) 1cm SET TIME BASE FOR 10/20 ns/cm FIG. 4-TYPICAL INSTANTANEOUS FIG. 3-TYPICAL REVERSE CHARACTERISTICS 10 100 TJ=100oC 10 TJ=80oC 1.0 TJ=25oC 0.1 0.01 0 20 40 60 80 100 120 140 INSTANTANEOUS FORWARD CURRENT (A) INSTANTANEOUS REVERSE CURRENT (uA) FORWARD CHARACTERISTICS SFM11M-LF~SFM14M-LF SFM15M-LF~SFM16M-LF 1.0 .1 .01 SFM18M-LF~ SFM19M-LF .001 .2 .4 .6 .8 1.0 1.2 1.4 1.6 1.8 INSTANTANEOUS FORWARD VOLTAGE (V) PERCENT OF RATED PEAK REVERSE VOLTAGE (%) FIG. 5-MAXIMUM NON-REPETITIVE FIG. 6-TYPICAL JUNCTION CAPACITANCE FORWARD SURGE CURRENT 200 8.3 ms Single Half Sine Wave (JEDEC Method) 30 JUNCTION CAPACITANCE (pF) PEAK FORWARD SURGE CURRENT (A) 40 25 20 15 10 5 0 1 5 10 20 50 100 NUMBER OF CYCLES AT 60 Hz SFM11M-LFR THRU SFM19M-LFR 100 40 20 SFM11M-LF~SFM14M-LF TJ=25oC 10 6 4 SFM15M-LF~SFM19M-LF 2 1 .1 .2 .4 1.0 2 4 10 20 40 100 REVERSE VOLTAGE (V) Page: 2