Frontier Electronics Corp. 667 E. COCHRAN STREET, SIMI VALLEY, CA 93065 TEL: (805) 522-9998 FAX: (805) 522-9989 E-mail: [email protected] Web: http://www.frontierusa.com 1A SURFACE MOUNT FAST EFFICIENT RECOVERY RECTIFIERS ES1A-LFR THRU ES1J-LFR SOLDERING PAD .220(5.58) REF CATHODE FEATURES z FOR SURFACE MOUNTED APPLICATIONS z LOW PROFILE PACKAGE z BUILT-IN STRAIN RELIEF z EASY PICK AND PLACE z GLASS PASSIVATED CHIP JUNCTION z PLASTIC MATERIAL USED CARRIES UNDERWRITERS LABORATORY CLASSIFICATION 94 V-0 z HIGH TEMPERATURE SOLDERING:250°C/10 SECONDS AT TERMINALS z ROHS .065(1.65) .040(1.25) .08(2.03) MIN .052(1.32) MIN .220(5.6) .192(4.9) .094(2.38) MAX .190(4.8) .157(4.0) .110(2.8) .090(2.3) .100(2.6) .080(2.0) MECHANICAL DATA z CASE: MOLDED PLASTIC, DO-214AC (SMA), DIMENSIONS IN INCHES AND (MILLIMETERS) z TERMINALS: SOLDER PLATED z POLARITY: INDICATED BY CATHODE BAND z WEIGHT: 0.064 GRAMS .071(1.8) .035(0.9) .080(2.0) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS RATINGS AT 25°C AMBIENT TEMPERATURE UNLESS OTHERWISE SPECIFIED SINGLE PHASE, HALF WAVE, 60 HZ, RESISTIVE OR INDUCTIVE LOAD. FOR CAPACITIVE LOAD, DERATE CURRENT BY 20% RATINGS SYMBOL ES1A-LFR ES1B-LFR ES1D-LFR ES1E-LFR ES1G-LFR ES1J-LFR UNITS MAXIMUM RECURRENT PEAK REVERSE VOLTAGE MAXIMUM RMS VOLTAGE MAXIMUM DC BLOCKING VOLTAGE MAXIMUM AVERAGE FORWARD RECTIFIED CURRENT AT TL=90°C MAXIMUM OVERLOAD SURGE 8.3ms SINGLE HALF SINE-WAVE TYPICAL JUNCTION CAPACITANCE (NOTE 1) TYPICAL THERMAL RESISTANCE (NOTE 2) VRRM VRMS VDC 50 35 50 100 70 100 30 A PF °C/W STORAGE TEMPERATURE RANGE TSTG -55 TO + 150 ℃ OPERATING TEMPERATURE RANGE TOP -55 TO + 125 ℃ IO IFSM CJ θJL 200 140 200 300 210 300 400 280 400 600 420 600 1.0 V V V A 30 15 10 ELECTRICAL CHARACTERISTICS (AT TA =25°C UNLESS OTHERWISE NOTED) CHARACTERISTICS SYMBOL ES1A-LFR ES1B-LFR ES1D-LFR ES1E-LFR ES1G-LFR ES1J-LFR UNITS MAXIMUM FORWARD VOLTAGE AT 1.0A AND 25℃ VF MAXIMUM REVERSE CURRENT AT 25℃ IR 0.98 1.25 V μA 10 MAXIMUM REVERSE RECOVERY TIME (NOTE 3) TRR 25 MARKING ES1A ES1B ES1D ES1E NOTE: 1. MEASURED AT 1.0 MHZ AND APPLIED REVERSE VOLTAGE OF 4.0 V 2. THERMAL RESISTANCE FROM JUNCTION TO TERMINAL 5.0mm2 (.013 mm THICK) LAND AREAS 3. REVERSE RECOVERY TEST CONDITIONS: IF=0.5A, IR=1.0A, IRR=0.25A ES1A-LFR THRU ES1J-LFR 1.75 nS ES1G Page: 1 ES1J RATINGS AND CHARACTERISTIC CURVE ES1A-LFR THRU ES1J-LFR FIG. 1-TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTIC FIG. 2-TYPICAL FORWARD Trr CURRENT DERATING CURVE 2.0 AVERAGE FORWARD +0.5A (-) D.U.T. PULSE GENERATOR ( NOTE 2 ) (+) 25 Vdc (approx) 1Ω NON INDUCTIVE (-) OSCILLOSCOPE ( NOTE 1 ) 0 -0.25A (+) CURRENT (A) 100Ω NO INDUCTIVE 50Ω NO INDUCTIVE 1.0 P.C.B MOUNTED ON 0.3×0.3”(8.0×8.0mm) COPPER PAD AREAS 0 25 50 75 100 125 150 175 LEAD TEMPERATURE (oC) 1cm NOTE: 1. RISE TIME=7ns MAX. INPUT IMPEDANCE=1 MOhms 22PF 2. RISE TIME =10ns MAX. SOURCE IMPEDANCE=50 OHMS SET TIME BASE FOR 10/20 ns/cm FIG. 4-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 10 100 TJ=100oC 10 TJ=80oC 1.0 TJ=25oC 0.1 0.01 0 20 40 60 80 100 120 140 INSTANTANEOUS FORWARD CURRENT (A) INSTANTANEOUS REVERSE CURRENT (uA) FIG. 3-TYPICAL REVERSE CHARACTERISTICS ES1A-LF~ES1D-LF 1.0 ES1E-LF~ES1G-LF .1 .01 ES1J-LF .001 0 FIG. 5-MAXIMUN NON-REPETITIVE .6 .8 1.0 1.2 1.4 1.6 1.8 200 40 8.3 ms Single Half Sine Wave (JEDEC Method) 25 20 15 10 5 100 JUNCTION CAPACITANCE (pF) PEAK FORWARD SURGE CURRENT (A) .4 FIG. 6-TYPICAL JUNCTION CAPACITANCE FORWARD SURGE CURRENT 30 .2 INSTANTANEOUS FORWARD VOLTAGE (V) PERCENT OF RATED PEAK REVERSE VOLTAGE (%) 0 Single Phase Half Wave 60 Hz Resistive or Inductive Load 40 TJ=25oC ES1A-LF~ES1D-LF 20 10 6 4 ES1E-LF~ES1J-LF 2 1 1 5 10 20 50 NUMBER OF CYCLES AT 60 Hz ES1A-LFR THRU ES1J-LFR 100 .1 .2 .4 1.0 2 4 10 20 40 100 REVERSE VOLTAGE (V) Page: 2