Frontier Electronics Corp. 667 E. COCHRAN STREET, SIMI VALLEY, CA 93065 TEL: (805) 522-9998 FAX: (805) 522-9989 E-mail: [email protected] Web: http://www.frontierusa.com 2A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIERS SS22A THRU SS210A FEATURES z FOR SURFACE MOUNTED APPLICATIONS z LOW PROFILE PACKAGE z BUILT-IN STRAIN RELIEF z EASY PICK AND PLACE z PLASTIC MATERIAL USED CARRIES UNDERWRITERS LABORATORY CLASSIFICATION 94 V-0 z EXTREMELY LOW VF z MAJORITY CARRIER CONDUCTION z HIGH TEMPERATURE SOLDERING: 250°C/10 SECONDS AT TERMINALS SOLDERING PAD CATHODE .087(2.2) .065(1.65) .040(1.25) .071(1.8) .177(4.5) .220(5.6) .192(4.9) .190(4.8) .157(4.0) .110(2.8) .090(2.3) .100(2.6) .080(2.0) MECHANICAL DATA z CASE: MOLDED PLASTIC, DO-214AC (SMA), DIMENSIONS IN INCHES AND (MILLIMETERS z TERMINALS: SOLDER PLATED z POLARITY INDICATED BY CATHODE BAND z WEIGHT 0.064 GRAMS .071(1.8) .035(0.9) .080(2.0) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS RATINGS AT 25°C AMBIENT TEMPERATURE UNLESS OTHERWISE SPECIFIED SINGLE PHASE, HALF WAVE, 60 HZ, RESISTIVE OR INDUCTIVE LOAD. FOR CAPACITIVE LOAD, DERATE CURRENT BY 20% RATINGS SYMBOL SS22A MAXIMUM RECURRENT PEAK REVERSE VOLTAGE MAXIMUM RMS VOLTAGE MAXIMUM DC BLOCKING VOLTAGE MAXIMUM AVERAGE FORWARD RECTIFIED CURRENT SEE FIG.1 MAXIMUM OVERLOAD SURGE 8.3ms SINGLE HALF SINE-WAVE VRRM VRMS VDC TYPICAL THERMAL RESISTANCE (NOTE 2) TYPICAL THERMAL RESISTANCE (NOTE 2) 20 14 20 SS23A SS24A SS25A SS26A 30 21 30 40 28 40 50 35 50 60 42 60 SS28A SS210A UNITS 80 56 80 100 70 100 V V V IO 2.0 IFSM 50 A RθjL 17 ℃/W RθjA 75 ℃/W STORAGE TEMPERATURE RANGE TSTG -55 TO + 150 ℃ OPERATING TEMPERATURE RANGE TOP -55 TO + 125 ℃ A ELECTRICAL CHARACTERISTICS (AT TA =25°C UNLESS OTHERWISE NOTED) CHARACTERISTICS SYMBOL SS22A SS23A SS24A SS25A 0.50 SS26A 0.70 SS28A SS210A UNITS 0.85 V MAXIMUM FORWARD VOLTAGE AT 2.0A AND 25℃(NOTE 1) VF MAXIMUM REVERSE CURRENT AT TA=25℃(NOTE 1) IR 1.0 mA MAXIMUM REVERSE CURRENT AT TA=125℃(NOTE 1) IR 20.0 mA NOTE: 1. PULSE TEST : 300μS PULSE WIDTH , 1% DUTY CYCLE 2. P.C.B. MOUNTED 0.55”×0.55 “(14×14 mm ) 0.013mm THICK COPPER PAD AREAS SS22A THRU SS210A Page: 1 RATINGS AND CHARACTERISTIC CURVE SS22A THRU SS210A SINGLE PHASE HALF WAVE 60HZ RESISTIVE OR INDUCTIVE LOAD 1.0 P.C.B MOUNTED ON 0.3×0.3”(8.0×8.0mm) COPPER PAD AREAS 0 0 20 40 60 80 100 120 140 160 180 200 20 10 SS22A~SS24A SS25A~SS26A SS28A~SS210A 1.0 TJ=25℃ PULSE WIDTH=300us 1% DUTY CYCLE 0.1 FIG. 3 - TYPICAL REVERSE CHARACTERISTICS 100 FIG. 4 - TYPICAL JUNCTION CAPACITANCE JUNCTION CAPCITANCE, PF SS28A~SS210A SS25A~SS26A SS22A~SS24A 10 .1 .3 .5 .7 .9 1.1 1.3 1.5 1.7 1.9 2.1 INSTANTANEOUS FORWARD VOLTAGE, VOLTS LEAD TEMPERATURE (℃) INSTANTANEOUS REVERSE CURRENT, MILLIAMPERES TA=125℃ 1.0 TA=75℃ .10 400 200 TJ=25℃ 100 80 60 SS22A~SS24A 40 SS25A~SS26A SS28A~SS210A 20 10 0.1 0.4 1.0 4 10 40 80100 TJ=25℃ REVERSE VOLTAGE, VOLTS .01 FIG. 5 - MAXIMUM NON-REPETITIVE SURGE CURRENT .001 0 20 40 60 80 100 120 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) 140 50 PEAK FORWARD SURGE CURRENT, AMPERES IO-AVERAGE RECTIFIED CURRENT (A) 2.0 FIG.2 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS S INSTANTANEOUS FORWARD CURRENT FIG. 1 - FORWARD CURRENT DERTING CURVE 8.3ms Single Half Sine-Wave (JEDEC Method) 40 30 20 10 0 1 2 4 10 20 40 100 NUMBER OF CYCLES AT 60HZ SS22A THRU SS210A Page: 2