Wireless Non-Contact Switch (WLS Series) Limitless™ Switch DESCRIPTION Honeywell’s Limitless™ product line uses the latest commercial product, machine, equipment, etc. The Limitless™ WLS Non- off-the-shelf wireless technology. The Limitless™ WLS Series Contact Switch’s design features an industrial grade reed switch. is especially beneficial for remote monitoring applications Customers can choose how the reed switch is oriented within the where wiring or wire maintenance is not physically possible or switch’s plastic head, i.e., either top- or side-sensing. Combining economically feasible. this greater flexibility with proven harsh-duty packaging can Honeywell is expanding the Limitless™ product line with its result in increased efficiencies and improved safety for industrial industrial Wireless Non-Contact Switch that provides non-contact machines, equipment, OEMs, and operators. presence/absence detection of a variety of different magnet styles and magnetic actuators installed on the end-users’ FEATURES Wireless design • • • • • • Radio (license-free and global): WPAN 802.15.4, 2.4 GHz, point-to-point FCC 15, IC, ACMA, ETSI, COFETEL, WPC & IDA Up to 305 m [1000 ft] line-of-sight communication range when used with a Limitless™ wireless monitor or receiver module (sold separately) Reliable, flexible, and secure wireless transmission Replaceable battery with ultra-low power consumption Direct or remote mount antenna options BENEFITS • • • • • Allows “non-contact” actuation Enables presence/absence detection in remote parts of application/machinery, where wiring is an issue or not feasible Able to reconfigure and network multiple switches, or point-to-point with personalized addresses, which allows for adding, subtracting or relocating of the Limitless™ WLS Non-Contact Switches Reduced installation/maintenance costs with no wires, conduit, strain relief, clips, connectors, connection boxes, etc. Eliminates issues with wire connection integrity on moving equipment Consumes ultra-low power to prolong battery life Mechanical design • • • • APPLICATIONS IP67; NEMA 1, 4, 12, 13 Top and side sensing heads Zinc head and body are phosphate treated and epoxy finished • • • • • Machine tools Packaging machinery Lifts Ag/construction equipment Industrial machines Limitless™ Series Table 1. General Limitless™ WLS Series Specifications Characteristic Parameter Series name WLS Series Product type Limitless™ Non-Contact Switch Availability Global, license-free bands Operating characteristics Operating point: 3,81 mm [0.15 in] min.; Release point: 15,24 mm [0.60 in] max. with use of WMG1 magnet (included with WLS Series Non-Contact Switch) Sensing target Top and side of head Housing material Zinc head and body are phosphate treated and epoxy finished; 30% glass-filled PBT plastic head Housing type WLS Radio type WPAN 802.15.4; 2.4GHz Communication agency approvals/certificates* - FCC 15.247: United States of America - IC RSS 210: Canada - COFETEL: Mexico - ETSI, CE mark: European countries - ACMA, C-TICK: Australia - IDA: Singapore - WPC: India Antenna type RP-SMA jack for direct or remote mount antenna options; omni directional standard Signal range Nominal 305 m** [1000 ft]** Clear line-of-sight between Limitless™ switch and monitor/receiver when using 2.2 dBi integral antenna Internal power option (battery) 3.6 Vdc Lithium Thionyl Chloride; 2/3 AA size (Est. life >1yr) Manufactured by Green Energy, part number ER14335M Sealing IP67; NEMA 1, 4, 12, 13 EMC Latest applicable standards: EN 300 328, V1.7.1; EN 61326-1 (2006); EN 301 489-1, V1.8.1; EN 301 489-17, V2.1.1 Shock IEC 60068-2-27; half sine, 10 g, 6 mS, 3 axis Vibration IEC 60068-2-6; 10-58 Hz w/ 0,35 mm peak-to-peak - 5g Operating temperature -40 to 85 °C [-40 °F to 185 °F] *Honeywell is continuing to add new Country Communication Agency Approvals as opportunities and requirements are established **Actual range will vary depending upon antennas, cables, and site topography. NOMENCLATURE TREES Limitless™ WLS Series Non-Contact Switch Nomenclature WLS 1 A 00 A Q Switch Type Gen Code RF Code Antenna Type Code Country Use Code Operating Head Code WLS Series 1 Wireless Version 1 A 2.4 GHz; IEEE 802.15.4 00 No antenna; RP-SMA connector jack A US, Canada, Mexico 02 2.2 dBi omni w/switch mount; tilt/swivel B All other approved countries1, 2, 3 11 0 dBi omni w/ switch mount; straight design Use with antenna type codes 00 - 03, 05, 10, 11 only; usage also allowed in Country Code A. 1 Some countries require specific communication certifications. Contact Honeywell for existing certification information. 2 If Limitless devices are used on machinery that may shipped globally, use country code “B”. 3 2 Honeywell • Sensing and Control Q RS2 Modification Code (RS2 only) Specials Internal battery w/ Head assembled with target to label side switch target RS1 reed on top of head 3 Head assembled with target to right side switch target RS2 reed on side of head 4 Head assembled with target to left side 5 Head assembled with target to mounting surface See specials Internal battery w/ Wireless Non-Contact Switch Table 2. Standard Listings Part Number Description WLS1A00AQRS1 Limitless™ WLS Series Non-Contact Switch with no antenna and a top sensing target, for use in US Canada, and Mexico WLS1A00AQRS2 Limitless™ WLS Series Non-Contact Switch with no antenna and a side sensing target, for use in US Canada, and Mexico WLS1A11AQRS1 Limitless™ WLS Series Non-Contact Switch with a 0 dBi antenna and a top sensing target, for use in US Canada, and Mexico WLS1A11AQRS2 Limitless™ WLS Series Non-Contact Switch with a 0 dBi antenna and a side sensing target, for use in US Canada, and Mexico WLS1A00BQRS1 Limitless™ WLS Series Non-Contact Switch with no antenna and a top sensing target, for use in all other approved countries WLS1A00BQRS2 Limitless™ WLS Series Non-Contact Switch with no antenna and a side sensing target, for use in all other approved countries WLS1A11BQRS1 Limitless™ WLS Series Non-Contact Switch with a 0 dBi antenna and a top sensing target, for use in all other approved countries WLS1A11BQRS2 Limitless™ WLS Series Non-Contact Switch with a 0 dBi antenna and a side sensing target, for use in all other approved countries Honeywell • Sensing and Control 3 Limitless™ Series Limitless™ WPMM Monitor Nomenclature (used in conjunction with the Limitless™ WLS Switch) WPMM 1 A 00 A Switch type Gen Code RF Code Antenna type code Country use code WPMM Series Monitor 1 Version 1 A 2.4 GHz; IEEE 802.15.4 00 No antenna; RP-SMA connector jack A US, Canada, Mexico 01 2.2 dBi omni w/switch mount; straight design B All other approved countries1, 2, 3 02 2.2 dBi omni w/switch mount; tilt/swivel 03 3.0 dBi omni w/remote adhesive mount 9.8 ft cable 04 5.5 dBi omni w/remote mag. mount, tilt/swivel 5 ft cable 05 5.5 dBi omni w/remote mag. mount, tilt/swivel 10ft cable 06 9.0 dBi omni w/remote mag. mount, tilt/swivel 5 ft cable 07 9.0 dBi omni w/remote mag. mount, tilt/swivel 10ft cable 08 8.0 dBi omni w/remote bkt. mount, str. design 3 ft cable 09 8.0 dBi omni w/remote bkt. mount, str. design 11 ft cable 10 2.2 dBi omni w/remote mag. mount, tilt/swivel 10 ft cable Use with antenna type codes 00 - 03, 05, 10, 11 only; usage also allowed in Country Code A. 1 Some countries require specific communication certifications. Contact Honeywell for existing certification information. 2 If Limitless devices are used on machinery that may shipped globally, use country code “B”. 3 Limitless™ WDRR Din-Rail Receiver Nomenclature (used in conjunction with the Limitless™ WLS Switch) WDRR 1 A 00 A 0 A Switch type GEN code RF Code Antenna type code Country use code Output code Channel code WDRR Series Din-Rail Receiver 1 Version 1 4 Honeywell • Sensing and Control A 2.4 GHz; IEEE 802.15.4 00 No antenna; RP-SMA connector jack A US, Canada Mexico 01 2.2 dBi omni w/switch mount; straight design B All other approved countries1,2,3 02 2.2 dBi omni w/switch mount; tilt/swivel 03 3.0 dBi omni w/remote adhesive mount 9.8 ft cable 04 5.5 dBi omni w/remote mag. mount, tilt/swivel 5 ft cable 05 5.5 dBi omni w/remote mag. mount, tilt/swivel 10 ft cable 06 9.0 dBi omni w/remote mag. mount, tilt/swivel 5 ft cable 07 9.0 dBi omni w/remote mag. mount, tilt/swivel 10 ft cable 08 8.0 dBi omni w/remote bkt. mount, str. design 3 ft cable 09 8.0 dBi omni w/remote bkt. mount, str. design 11 ft cable 10 2.2 dBi omni w/remote mag. mount, tilt/swivel 10 ft cable Use with antenna type codes 00 - 03, 05, 10, 11 only; usage allowed in Country Code A. 1 Some countries require specific communication certifications. Contact Honeywell for existing certification information. 2 If Limitless™ devices are used on machinery that may be shipped globally, use Country Code “B”. 3 0 NPN/PNP selectable A 14 channels Wireless Non-Contact Switch DIMENSIONS Honeywell • Sensing and Control 5 Limitless™ Series ANTENNA OPTIONS Antenna Type Code “01” WAN01RSP straight design, 2.2 dBi gain, direct mount connector Antenna Type Code “02” WAN02RSP tilt & swivel design, 2.2 dBi gain, direct mount connector Antenna Type Code “04” Antenna Type Code “03” WAN03RSP flat design, 3 dBi gain, adhesive mount WAN04RSP tilt & swivel design, 5.5 dBi gain, direct mount connector WAN05RSP& WAMM100RSP-005 T/S, 9 dBi gain, magnetic mount WAN06RNJ straight design, 8 dBi gain, bracket mount Antenna Type Code “11” WAN07RSP straight design, 0 dBi gain, direct mount connector WPB1 WPMM mounting bracket WAN09RSP low-profile mobile antenna, 3.0 dBi gain, magnetic mount WPR1 WPMM panel mount retainer 6 Honeywell • Sensing and Control WAN10RSP straight mobile antenna, 5.0 dBi gain, magnetic mount WAN11RSP low-profile dome antenna, 4.0 dBi gain, through-hole screw mount Wireless Non-Contact Switch ANTENNA CABLE OPTIONS MOUNTING OPTIONS WCA200RNPRSP-002 Cable Assembly: 2 ft1 WCA200RNPRSP-010 Cable Assembly: 10 ft1 Limitless™ Panel Mount Accessories WAMM100RSP-005 Magnetic Antenna Mount: w/ 5 ft of cable3 WAMM100RSP-010 Magnetic Antenna Mount: w/ 10 ft of cable3 1 use only with WAN06RNJ antenna and when extra cable is desired WCA200RNJRSP-002 Cable Assembly: 2 feet length2 WCA200RNJRSP-005 Cable Assembly: 5 feet length2 WCA200RNJRSP-010 Cable Assembly: 10 feet length2 WCA200RNJRSP-015 Cable Assembly: 15 feet length2 WCA200RNJRSP-020 Cable Assembly: 20 feet length2 Use when extra cable length is desired and allows connection from RP-SMA jack to RP-SMA plug 2 Use only with WAN01RSP, WAN02RSP, WAN04RSP, WAN05RSP, or WAN08RSP antennas 3 MAGNETS Limitless™ magnets for use with WLS Non-Contact Switch only WMG1: Operating point 0.150 in min.; Release point 0.600 in max. WMG2: Operating point 0.45 in min.; Release point 1.0 in max. Honeywell • Sensing and Control 7 Limitless™ Series Wireless Non-Contact Switch m WARNING m WARNING • The information presented in this datasheet is for reference only. DO NOT USE this document as product installation information. • Complete installation, operation and maintenance information is provided in the instructions supplied with each product. Failure to comply with these instructions could result in death or serious injury. Honeywell does not recommend using devices for critical control applications where there is, or may be, a single point of failure or where single points of failure may result in an unsafe condition. It is up to the end-user to weigh the risks and benefits to determine if the products are appropriate for the application based on security, safety and performance. Additionally, it is up to the end-user to ensure that the control strategy results in a safe operating condition if any crucial segment of the control solution fails. Honeywell customers assume full responsibility for learning and meeting the required Declaration of Conformity, Regulations, Guidelines, etc. for each country in their distribution market. IMPROPER INSTALLATION MISUSE OF DOCUMENTATION m WARNING PERSONAL INJURY DO NOT USE these products as safety or emergency stop devices or in any other application where failure of the product could result in personal injury. Failure to comply with these instructions could result in death or serious injury. Find out more Honeywell serves its customers through a worldwide network of sales offices, representatives and distributors. For application Warranty. Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell’s standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages. While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application. Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. assistance, current specifications, pricing or name of the nearest Authorized Distributor, contact your local sales office. To learn more about Honeywell’s sensing and control products, call +1-815-235-6847 or 1-800-537-6945, visit sensing.honeywell.com, or e-mail inquiries to [email protected] Sensing and Control Honeywell 1985 Douglas Drive North Golden Valley, MN 55422 sensing.honeywell.com 002373-1-EN IL50 GLO February 2013 Copyright © 2013 Honeywell International Inc. All rights reserved.