HI-SINCERITY Spec. No. :HSK200801 Issued Date : 2008.10.28 Revised Date : Page No. : 1/4 MICROELECTRONICS CORP. HSK07X Series 0.7 AMP. SURFACE MOUNT RECTIFIERS Features • Glass passivated device • Ideal for surface mouted applications • Low leakage current • Metallurgically bonded construction • High temperature soldering: 250°C/10 seconds at terminals SOD-123FL Mechanical Data • Case:JEDEC SOD-123FL,molded plastic over passivated chip • Terminals:Solder Plated, solderable per MIL-STD-750, Method 2026 • Polarity: Color band denotes cathode end. • Weight: 0.0008 ounces, 0.022 gram1. • Mounting position: Any Maximum Ratings and Electrical Characteristics Rating at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. HSK07B HSK07D HSK07G HSK07J HSK07K HSK07M Device marking code RB RD RG RJ RK RM UNITS Maximum recurrent peak reverse voltage VRRM 100 200 400 600 800 1000 V Maximum RMS voltage VRMS 70 140 280 420 560 700 V Maximum DC blocking voltage VDC 100 200 400 600 800 1000 V Maximum average forword rectified current TA=65℃ (NOTE 1) I(AV) 0.7 A on rated load TL=25℃ Peak forward surge current 8.3ms single half-sine-wave superimposed IFSM 20 A Typical thermal resistance (NOTE 2) RjθA 180 K/W Maximum reverse recovery time (NOTE 3) trr Operating temperature range Tj -205 ℃ TSTG -205 ℃ Storage temperature range 150 250 500 ns Note1: Averaged over any 20 ms period. Note2 Thermal resistance junction to ambient, 6.0 mm2 coppeer pads to each terminal. Note3:.Measured with IF=0.5A, IR=1A, Irr=0.25A. HSK07B0 thru HSK07M HSMC Product Specification HI-SINCERITY Spec. No. :HSK200801 Issued Date : 2008.10.28 Revised Date : Page No. : 2/4 MICROELECTRONICS CORP. ELECTRICAL CHARACTERISTICS Parameter Min Typ. Max. Unit VF - - 1.15 V IR -- -- 50 10 μA Cj - 4 - pF Symbol forward voltage at 0.7A Maximum instantaneous (NOTE 4) Maximum DC reverse current @TA=25℃ at rated DC blockjing voltage @TA=125℃ Typical junction capacitance (NOTE 5) NOTES: 4.Pulse test:300μs pulse width,1% duty cycle. 5.Measured at 1.0MHz and applied average voltage of 4.0V DC. HSK07B0 thru HSK07M HSMC Product Specification HI-SINCERITY MICROELECTRONICS CORP. Spec. No. :HSK200801 Issued Date : 2008.10.28 Revised Date : Page No. : 3/4 Characteristics Curve HSK07B0 thru HSK07M HSMC Product Specification HI-SINCERITY MICROELECTRONICS CORP. Spec. No. :HSK200801 Issued Date : 2008.10.28 Revised Date : Page No. : 4/4 SOD-123FL Dimension Dimensions in millimeters *:Typical Important Notice: • All rights are reserved. Reproduction in whole or in part is prohibited without the prior written approval of HSMC. • HSMC reserves the right to make changes to its products without notice. • HSMC semiconductor products are not warranted to be suitable for use in Life-Support Applications, or systems. • HSMC assumes no liability for any consequence of customer product design, infringement of patents, or application assistance. Head Office And Factory : • Head Office (Hi-Sincerity Microelectronics Corp.) : 10F.,No. 61, Sec. 2, Chung-Shan N. Rd. Taipei Taiwan R.O.C. Tel : 886-2-25212056 Fax : 886-2-25632712, 25368454 HSK07B0 thru HSK07M HSMC Product Specification