HI-SINCERITY Spec. No. :HSK200802 Issued Date : 2008.10.28 Revised Date : Page No. : 1/3 MICROELECTRONICS CORP. HSK400X Series 1.0AMP. SURFACE MOUNT RECTIFIERS Features • Low forward surge current • Ideal for surface mouted applications • Low leakage current SOD-123FL Mechanical Data • Case:JEDEC SOD-123FL,molded plastic over passivated chip. • Terminals:Solder Plated, solderable per MIL-STD-750, Method 2026 • Polarity: Color band denotes cathode end • Weight: 0.006 ounces, 0.02 gram . • Mounting position: Any. Maximum Ratings and Electrical Characteristics Rating at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. HSK HSK HSK HSK HSK HSK HSK UNITS 4001 4002 4003 4004 4005 4006 4007 Device marking code D1 D2 D3 D4 D5 D6 D7 Maximum recurrent peak reverse voltage 100 200 400 600 800 1000 V VRRM 50 Maximum RMS voltage 70 140 280 420 560 700 V VRMS 35 Maximum DC blocking voltage 100 200 400 600 800 1000 V VDC 50 Maximum average forword rectified current @TA=75℃ I(AV) 1 A Peak forward surge current 8.3ms single half-sine-wave superimposed on rated load IFSM 25 A 5.0 μA Maximum DC reverse current @TA=25℃ at rated DC blocking voltage @TA=125℃ IR measured at f=1MHZ,VR=4.0V Typical junction capacitance CJ 15 pF RθJL Tj TSTG 20 ℃/W - 55 --- + 150 ℃ - 55 --- + 150 ℃ Typical thermal resistance junction to lead Operating temperature range Storage temperature range 50.0 Note1: Pulse test: pulse width 300μsec,duty cycle 2%. HSK4001 thru HSK4007 HSMC Product Specification HI-SINCERITY MICROELECTRONICS CORP. Spec. No. :HSK200802 Issued Date : 2008.10.28 Revised Date : Page No. : 2/3 Characteristics Curve HSK4001 thru HSK4007 HSMC Product Specification HI-SINCERITY MICROELECTRONICS CORP. Spec. No. :HSK200802 Issued Date : 2008.10.28 Revised Date : Page No. : 3/3 SOD-123FL Dimension Dimensions in millimeters *:Typical Important Notice: • All rights are reserved. Reproduction in whole or in part is prohibited without the prior written approval of HSMC. • HSMC reserves the right to make changes to its products without notice. • HSMC semiconductor products are not warranted to be suitable for use in Life-Support Applications, or systems. • HSMC assumes no liability for any consequence of customer product design, infringement of patents, or application assistance. Head Office And Factory : • Head Office (Hi-Sincerity Microelectronics Corp.) : 10F.,No. 61, Sec. 2, Chung-Shan N. Rd. Taipei Taiwan R.O.C. Tel : 886-2-25212056 Fax : 886-2-25632712, 25368454 HSK4001 thru HSK4007 HSMC Product Specification