SM4001FL THRU SM4007FL 50V-1000V Glass Passivated Surface Mount Rectifiers 1.0A FEATURES SOD-123FL Low forward surge current Ideal for surface mounted applications Low leakage current Mechanical Data Case: JEDEC SOD-123FL, molded plastic over passivated chip Terminals: Solder Plated, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Weight: 0.006 ounces, 0.02 gram Mounting position: Any MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating 25°C ambient temperature unless otherwise specified.Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. PART NUMBERS PARAMETERS SYMBOL SM 4001 FL SM 4002 FL SM 4003 FL SM 4004 FL SM 4005 FL SM 4006 FL SM 4007 FL UNITS Recurrent Reverse Voltage (Max.) VRRM 50 100 200 400 600 800 1000 V RMS Voltage (Max.) VRMS 35 70 140 280 420 560 700 V DC Blocking Voltage (Max.) VDC 50 100 200 400 600 800 1000 V Instantaneous Forward Voltage (Max.) TESTING CONDITIONS (Note 1) Average Forward Rectified Current (Max.) VF 1.1 V IFM = 1.0A I(AV) 1.0 A TA = 75°C Peak Forward Surge Current IFSM DC Reverse Current at Rated DC Blocking Voltage (Max.) Typical Thermal Resistance Junction-Lead Typical Junction Capacitance Operating and Storage Temperature Range Notes: 1. 25 5.0 IR 50 A A RθJL 20 °C / W CJ 15 pF TJ, TSTG -55 ~ 150 °C 8.3ms single half sine-wave superimposed on rated load (JEDEC method) TA=25°C TA=125°C f=1MHz, VR=4.0V Pulse test:Pulse width 300 sec, duty cycle 2%. E-mail: [email protected] 1 of 2 Web Site: www.taychipst.com SM4001FL THRU SM4007FL Glass Passivated Surface Mount Rectifiers RATINGS AND CHARACTERISTIC CURVES E-mail: [email protected] 2 of 2 50V-1000V 1.0A SM4001FL THRU SM4007FL Web Site: www.taychipst.com