HYBRID IC VLA202-24051 DC-DC CONVERTER DESCRIPTION The VLA202-24051 is a non-isolated type DC-DC converter. Dimensions: mm OUTLINE DRAWING Its output power is 1.5W and has over-current protective function So it is an optimal product for power supply on the controller board. 18.3max FEATURES -Output 19.3max -Input voltage range ··············18V ~ 36VDC ······························· 5V, 300mA LOT No. 24051 XXXX 4.0 +/-1.0 APPLICATIONS Power supply to controller devices 0.5 +0.15/-0.1 2.54 3.0max 6 0.25 +0.2/-0.1 6max 8max 13max 3.0max 1 BLOCK DIAGRAM VIN Current 1 6 detector 2 Base driver Voltage detector 4 5 COMMON Vo HYBRID IC VLA202-24051 DC-DC CONVERTER MAXIMUM RATINGS (unless otherwise noted, Ta=25°C) Symbol Parameter VIN Conditions Ratings Unit Input voltage 36 V Io Output current 300 mA Topr Operating temperature No condensation allowable -10 ~ +80 *) °C Tstg Storage temperature No condensation allowable -25 ~ +85 °C *) Please refer the DERATING CHARACTERISTICS. ELECTRICAL CHARACTERISTICS (Unless otherwise noted, Ta=25°C, Vin=280V) Symbol Parameter VIN Input voltage Vo Limits Conditions Unit Min Typ Max Recommended range 18 24 36 V Output voltage Io = 0 ~ 300mA 4.7 5.0 5.3 V Reg-I Input regulation Io=300mA, VIN=18 ~ 36V - 30 100 mV Reg-L Load regulation Io=0 ~ 300mA - 70 150 mV η Efficiency Io=300mA - 70 - % Vp-p Ripple voltage Io=300mA - 100 150 *) mVp-p *) Not contained the spike noise. MEASUREMENT CIRCUIT Io 1 VIN 100µF + 2 A 6 VLA202-24051 220µF 50V + 25V 5 4 Please use electrolytic capacitor of output side with high frequency and low impedance. 2 V Vo LOAD HYBRID IC VLA202-24051 DC-DC CONVERTER TYPICAL CHARACTERISTICS 3 HYBRID IC VLA202-24051 DC-DC CONVERTER FOR SAFETY USING Great detail and careful attention are given to the production activity of Hics, such as the development, the quality of production, and in it’s reliability. However the reliability of Hics depends not only on their own factors but also in their condition of usage. When handling Hics, please note the following cautions. CAUTIONS Packing The materials used in packing Hics can only withstand normal external conditions. When exposed to outside shocks, rain and certain environmental contaminators, the packing materials will deteriorates. Carrying Storage 1) Please take care in handling. Don’t stack boxes too high. Avoid placing heavy materials on boxes. 2) Boxes must be positioned correctly during transportation to avoid breakage. 3) Don't throw or drop boxes. 4) Keep boxes dry. 5) Minimal vibration and shock during transportation is desirable. Avoid rain or snow. When storing Hics, please observe the following notices or possible deterioration of their electrical characteristics, risk of solderability, and external damage may occur. 1) Devices must be stored where fluctuation of temperature and humidity is minimal, and must not be exposed to direct sunlight. Store at the normal temperature of 5 to 30 degrees Celsius with humidity at 40 to 60%. Extended storage 2) Avoid locations where corrosive gasses are generated or where much dust accumulates. 3) Storage cases must be static proof. 4) Avoid putting weight on boxes. When extended storage is necessary, Hics must be kept non-processed. When using Hics which have been stored for more than one year or under severe conditions, be sure to check that the exterior is free from flaw and other damages. Maximum ratings To prevent any electrical damages, use Hics within the maximum ratings. The temperaqture, current, voltage, etc. must not exceed these conditions. Polarity To protect Hics from destruction and deterioration due to wrong insertion, make sure of polarity in inserting leads into the board holes, conforming to the external view for the terminal arrangement. 4 HYBRID IC VLA202-24051 DC-DC CONVERTER Marketing division, Marketing plannning department 6-41 Tsukuba, Isahaya, Nagasaki, 854-0065 Japan Keep safety first in your circuit designs! - ISAHAYA Electronics Corporation puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (1)placement of substitutive, auxiliary circuits, (2)use of non-flammable material or (3)prevention against any malfunction or mishap. Notes regarding these materials - These materials are intended as a reference to assist our customers in the selection of the ISAHAYA products best suited to the customer's application; they don't convey any license under any intellectual property rights, or any other rights, belonging ISAHAYA or a third party. - ISAHAYA Electronics Corporation assumes no responsibility for any damage, or infringement of any third party's rights, originating in the use of any product data, diagrams, charts or circuit application examples contained in these materials. - All information contained in these materials, including product data, diagrams and charts, represent information on products at the time of publication of these materials, and are subject to change by ISAHAYA Electronics Corporation without notice due to product improvements or other reasons. It is therefore recommended that customers contact ISAHAYA Electronics Corporation or an authorized ISAHAYA products distributor for the latest product information before purchasing product listed herein. - ISAHAYA Electronics Corporation products are not designed or manufactured for use in a device or system that is used under circumstances in which human life is potentially at stake. Please contact ISAHAYA electronics corporation or an authorized ISAHAYA products distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use. - The prior written approval of ISAHAYA Electronics Corporation is necessary to reprint or reproduce in whole or in part these materials. - If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited. - Please contact ISAHAYA Electronics Corporation or an authorized ISAHAYA products distributor for further details on these materials or the products contained therein. 5 Jun.2004