COMPONENTS PRODUCT INFORMATION microSDTM Memory Card Connector NEW CONNECTOR MB-0250-2 March 2013 ST11-H Series RoHS Compliant Overview The ST11-H Series are one-piece type external connectors for micro SDTM cards. These connectors are high density, SMT mounting, low profile, push-push type connectors compatible with the microSDTM card, which is standardized by SDATM as a compact card for hand-held devices. * microSDTM is a trademark of SD Card Association. Features Push-push structure, standard-mounting connectors for the microSDTM memory card standardized by SDATM Balanced EMI countermeasure with 7 hold-down points Slim design with 1.25mm height, 13.4mm width, and 15.3mm depth (depth including card: 17mm) Halogen free, supplied in embossed tape for automatic mounting (compatible with second reflow) Card insertion detection structure (D-SW), normally closed type Card lock structure 1mm push stroke, 3.4mm card eject length Countermeasure to prevent the card from popping out. General Specifications No. of Contacts: 8 pos.+2pos. (D-SW) Contact Resistance: 100m max. (initial value) Dielectric Withstanding Voltage: AC500Vr.m.s. per minute Operating Temperature: -30 Deg. C to +85 Deg. C Storage Temperature: -5 Deg. C to +85 Deg. C Rated Current: 0.5A / per pin Rated Voltage: 10V / per pin Insulation Resistance: 1,000M min. Lifetime: 5,000 times Card Insertion Force: 40N max. JAE PMK Div. Proprietary. Copyright © 2013, Japan Aviation Electronics Industry, Ltd. 1/4 MB-0250-2 Materials and Finishes Component Signal Contact D-SW Contact Material / Finish Copper alloy / Contact: Au plating over Ni Terminal: Au flash plating over Ni Housing Cover Frame Synthetic resin / None Stainless steel / Terminal area: Au flash plating Eject Bar Synthetic resin / None Spring Stainless steel / None Lock Stainless steel / None Cam Follower Stainless steel / None Ordering Information ST11 S 008 V 4 H (R2000) Series Connector Type S: Non-ZIF structure Reel Part Number (Note) Modification Code 4: Au flash plating No. of Contacts V: SMT mounting, with hold-downs Note) An embossed tape reel contains 2,000 pcs. Please contact us for details on embossed tape specifications. JAE PMK Div. Proprietary. Copyright © 2013, Japan Aviation Electronics Industry, Ltd. 2/4 MB-0250-2 Part Number ST11S008V4H SJ Drawing SJ113824 Table 1 CIRCUIT JAE PMK Div. Proprietary. Copyright © 2013, Japan Aviation Electronics Industry, Ltd. Unit: mm 3/4 MB-0250-2 Applicable board dimensions (for reference) Unit: mm Notice: Products shown in this brochure are made Product Marketing Division Aobadai Building, 3-1-19, Aobadai, Meguro-ku, Tokyo 153-8539 Phone: +81-3-3780-2882 FAX: +81-3-3780-2946 for the applications listed below. However, if the above-mentioned products are to be used in aerospace devices, marine cable-connection devices, atomic power control systems, medical equipment for lifesupport systems, or any other specific application requiring extremely high reliability, please contact JAE for further information. Recommended applications: Computers, Office machines, Measuring devices, Telecommunication devices (Terminals, Mobile devices), AV devices, Household applications, FA devices, etc. * The specifications in this brochure are subject to change without notice. Please contact JAE for information. JAE PMK Div. Proprietary. Copyright © 2013, Japan Aviation Electronics Industry, Ltd. 4/4