COMPONENTS PRODUCT INFORMATION NEW microSDTM Memory Card Connector CONNECTOR MB-0177-1 December 2008 ST9 Series RoHS Compliant < Outline > The ST9 Series are one-piece type external connectors for micro SDTM card. High density SMT mounting type low profile connector compatible with microSDTM cards, standardized by SDATM (SD Card Association) as a compact card for various portable devices. * microSDTM is a trademark of SD Card Association. Features Push-push structure normal mounting type connector for microSDTM memory cards, standardized by SDATM. Balanced EMI countermeasure by the 4 hold-down points Slim design with 1.45mm height, 13.7mm width and 15.2mm depth (depth including card: 17.1mm) Supply for automatic mounting in embossed tape (Compatible to second reflow) With card insertion detection structure (D-SW), Normally open With card lock structure 1mm push stroke and 3.3mm card eject length Countermeasure to prevent the card from popping out. General Specifications No. of Contacts :8 pos.+2pos. (D-SW) Contact Resistance: 100m ohm max. Dielectric Withstanding Voltage : AC500Vr.m.s. per minute Operating Temperature: -25 Deg. C to +85 Deg. C Storage Temperature: -10 Deg. C to +60 Deg. C Rated Current: 0.5A/ per pin Rated Voltage: 10V/ per pin Insulation Resistance: 1000M ohm min. Lifetime: 10,000 times Temperature Rise: 30 Deg. C rise max. 1/4 JAE PMK Div. Proprietary. Copyright © 2007，Japan Aviation Electronics Industry, Ltd. MB-0177-1 Materials and Finishes Components Signal contact Materials /Finishes Copper Alloy/ Contact: 0.5um min. Au plating over Ni Terminal: Au flash plating over Ni Housing Synthetic resin/ No (UL94V-0) Cover frame Stainless steel/ Terminal area: Au flash plating over Ni Eject bar Synthetic resin/ No (UL94V-0) Spring Stainless steel/ No D-SW contact Compliant to finish of signal contact Lock Stainless steel/ No Cam follower Stainless steel/ No Ordering Information ST9 S 008 V Series Connector type S: Non-ZIF structure 4 A (R1500) Reel part number (Note 3) A: Modification code 4: Au 0.5 um/ Au flash plating No. of contacts V: SMT mounting with H/ D 2/4 JAE PMK Div. Proprietary. Copyright © 2007，Japan Aviation Electronics Industry, Ltd. MB-0177-1 Part Number SJ Drawing ST9S008V4A SJ108062 Unit: mm 3/4 JAE PMK Div. Proprietary. Copyright © 2007，Japan Aviation Electronics Industry, Ltd. MB-0177-1 Unit: mm Applicable board dimensions (for reference) Note 1. This area should not touch the case in order to be free of load. Note 2. Vacuum area Note 3. An embossed tape reel contains 1,500 pcs. Please contact us for details on embossed tape specifications. Notice: Products shown in this leaflet are Japan Aviation Electronics Industry, Limited Product Marketing Division Aobadai Building, 3-1-19, Aobadai, Meguro-ku, Tokyo 153-8539 Phone: +81-3-3780-2763 FAX: +81-3-3780-2946 made for the applications listed below. However, if the above-mentioned products are to be used in aerospace devices, marine cable-connection devices, atomic power control systems, medical equipment for life-support systems, or any other specific application requiring extremely high reliability, please contact JAE for further information. Recommended applications: computers, office machines, measuring devices, telecommunication devices (terminals, mobile devices), AV devices, household applications, FA devices, etc. * The specifications in this brochure are subject to change without notice. Please contact JAE for information. JAE PMK Div. Proprietary. Copyright © 2007，Japan Aviation Electronics Industry, Ltd. 4/4