KINGBRIGHT WP7113SGD5V

T-1 3/4 (5mm) SOLID STATE LAMP
Part Number: WP7113SGD5V
Super Bright Green
Features
Description
z Low power consumption.
The Super Bright Green source color devices are made with
z Popular T-1 3/4 diameter package.
Gallium Phosphide Green Light Emitting Diode.
z General purpose leads.
z Reliable and rugged.
z Long life - solid state reliability.
z Available on tape and reel.
z 5V internal resistor.
z RoHS compliant.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the leads emerge from the package.
4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
SPEC NO: DSAF2429
REV NO: V.4B
DATE: MAR/30/2013
PAGE: 1 OF 6
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Q.M.Chen
ERP: 1101010230
Selection Guide
Part No.
Dice
WP7113SGD5V
Lens Type
Super Bright Green (GaP)
Iv (mcd) [2]
V= 5V
Viewing
Angle [1]
Min.
Typ.
2θ1/2
15
25
30°
Green Diffused
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity/ luminous Flux: +/-15%.
3. Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
Typ.
λpeak
Peak Wavelength
Super Bright Green
λD [1]
Dominant Wavelength
Δλ1/2
Max.
Units
Test Conditions
565
nm
VF=5V
Super Bright Green
568
nm
VF=5V
Spectral Line Half-width
Super Bright Green
30
nm
VF=5V
IF
Forward Current
Super Bright Green
11.5
17.5
mA
VF=5V
IR
Reverse Current
Super Bright Green
10
uA
VR = 5V
Note:
1.Wavelength: +/-1nm.
2. Wavelength value is traceable to the CIE127-2007 compliant national standards.
Absolute Maximum Ratings at TA=25°C
Parameter
Super Bright Green
Units
Power dissipation
85
mW
Forward Voltage
6
V
Reverse Voltage
5
V
Operating Temperature
-40°C To +70°C
Storage Temperature
-40°C To +85°C
Lead Solder Temperature [1]
260°C For 3 Seconds
Lead Solder Temperature [2]
260°C For 5 Seconds
Notes:
1. 2mm below package base.
2. 5mm below package base.
SPEC NO: DSAF2429
REV NO: V.4B
DATE: MAR/30/2013
PAGE: 2 OF 6
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Q.M.Chen
ERP: 1101010230
Super Bright Green
WP7113SGD5V
SPEC NO: DSAF2429
REV NO: V.4B
DATE: MAR/30/2013
PAGE: 3 OF 6
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Q.M.Chen
ERP: 1101010230
PACKING & LABEL SPECIFICATIONS
WP7113SGD5V
SPEC NO: DSAF2429
REV NO: V.4B
DATE: MAR/30/2013
PAGE: 4 OF 6
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Q.M.Chen
ERP: 1101010230
SPEC NO: DSAF2429
REV NO: V.4B
DATE: MAR/30/2013
PAGE: 5 OF 6
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Q.M.Chen
ERP: 1101010230
All design applications should refer to Kingbright application notes available at
http://www.KingbrightUSA.com/ApplicationNotes
SPEC NO: DSAF2429
REV NO: V.4B
DATE: MAR/30/2013
PAGE: 6 OF 6
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Q.M.Chen
ERP: 1101010230
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Kingbright:
WP7113SGD5V