Website: www.kingtronics.com Email: [email protected] Tel: (852) 8106 7033 Fax: (852) 8106 7099 KBU6005 THRU KBU610 Single Phase 6.0 AMPS. Glass Passivated Bridge Rectifiers Voltage Range 50 to 1000 Volts Current 6.0 Amperes FEATURES ◆Ideal for printed circuit board ◆Reliable low cost construction technique results in inexpensive product ◆High temperature soldering guaranteed: 260℃ / 10 seconds / 0.375” ( 9.5mm ) lead length at 5 lbs., ( 2.3 kg ) tension ◆UL Recognized File number: E347214 MECHANICAL DATA ◆Case: Molded plastic ◆Lead: solder plated ◆Polarity: As marked MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25℃ ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load.For capacitive load, derate current by 20% KBU KBU KBU KBU KBU KBU KBU 6005 601 602 604 606 608 610 UNITS SYMBOLS Maximum Repetitive Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V VDC 50 100 200 400 600 800 1000 V Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at TA=65℃ I(AV) 6.0 A IFSM 175 A VF 1.0 V Peak Forward Surge Current, 8.3ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Maximum Instantaneous Forward Voltage at 6.0A Maximum DC Reverse Current @ TA=25℃ Rated DC Blocking voltage per leg TA=125℃ IR 5.0 500 μA Typical Thermal Resistance (Note1) RθJA 8.6 (Note2) RθJC 3.1 TJ -55 to +150 ℃ TSTG -55 to +150 ℃ Operating Temperature Range Storage Temperature Range ℃/W Note: 1.Thermal Resistance from Junction to Ambient with units in Free Air, P.C.B. Mounted on 0.5×0.5”(12×12mm) Copper Pads,0.375” (9.5mm)Lead Length. 2. Thermal Resistance from Junction to Case with units Mounted on 2.6×1.4×0.06”Thick(6.5×3.5×0.15cm)Al.Plate. 1 Website: www.kingtronics.com Email: [email protected] Tel: (852) 8106 7033 Fax: (852) 8106 7099 KBU6005 THRU KBU610 RATING AND CHARACTERISTIC CURVES KBU6005 THRU KBU610 Note: Specifications are subject to change without notice. 2