KBPC25005W THRU KBPC2510W 25 AMPS. Single Phase Silicon Bridge Rectifiers Voltage Range 50 to 1000 Volts Current 25 Amperes Package: KBPC-W FEATURES ◆Ideal for printed circuit board ◆Reliable low cost construction technique results in inexpensive product ◆High temperature soldering guaranteed: 260℃ / 10 seconds / 0.375” ( 9.5mm ) lead length at 5 lbs., ( 2.3 kg ) tension ◆UL Recognized File number: E347214 MECHANICAL DATA ◆Case: Molded plastic ◆Lead: solder plated ◆Polarity: As marked Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25℃ ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load.For capacitive load, derate current by 20% KBPC KBPC KBPC KBPC KBPC Type Number SYMBOLS 25005W 2501W 2502W 2504W 2506W Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at TC=55℃ VRRM VRMS VDC 50 35 50 100 70 100 200 140 200 400 280 400 600 420 600 KBPC 2508W KBPC 2510W UNITS 800 560 800 1000 700 1000 V V V I(AV) 25 A IFSM 300 A VF 1.1 V IR 10 μA RθJC 2.0 ℃/W TJ -55 to +125 ℃ TSTG -55 to +150 ℃ Peak Forward Surge Current, 8.3ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Maximum Instantaneous Forward Voltage at 12.5A Maximum DC Reverse Current at Rated DC Blocking voltage per Element Typical Thermal Resistance (Note) Operating Temperature Range Storage Temperature Range Note: Thermal Resistance from Junction to Case. Website: www.kingtronics.com Email: [email protected] Tel: (852) 8106 7033 Fax: (852) 8106 7099 1 KBPC25005W THRU KBPC2510W RATING AND CHARACTERISTIC CURVES KBPC25005W THRU KBPC2510W Note: Specifications are subject to change without notice. Website: www.kingtronics.com Email: [email protected] Tel: (852) 8106 7033 Fax: (852) 8106 7099 2