KBPC25005 THRU KBPC2510 High Current 25 AMPS. Single Phase Glass Passivated Bridge Rectifiers Voltage Range 50 to 1000 Volts Current 25 Amperes Package: KBPC25 FEATURES ◆Ideal for printed circuit board ◆Reliable low cost construction technique results in inexpensive product ◆High temperature soldering guaranteed: 260℃ / 10 seconds / 0.375” ( 9.5mm ) lead length at 5 lbs., ( 2.3 kg ) tension ◆UL Recognized File number: E347214 MECHANICAL DATA ◆Case: Molded plastic ◆Lead: solder plated ◆Polarity: As marked MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25℃ ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load.For capacitive load, derate current by 20% KBPC KBPC KBPC KBPC SYMBOLS 25005 2501 2502 2504 Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at TC=55℃ VRRM VRMS VDC 50 35 50 100 70 100 200 140 200 KBPC 2506 KBPC 2508 KBPC 2510 UNITS 600 420 600 800 560 800 1000 700 1000 V V V 400 280 400 I(AV) 25 A IFSM 300 A VF 1.1 V IR 10 μA RθJC 2.0 ℃/W TJ -55 to +150 ℃ TSTG -55 to +150 ℃ Peak Forward Surge Current, 8.3ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Maximum Instantaneous Forward Voltage at 12.5A Maximum DC Reverse Current at Rated DC Blocking voltage per Element Typical Thermal Resistance (Note) Operating Temperature Range Storage Temperature Range Note: Thermal Resistance from Junction to Case. Website: www.kingtronics.com Email: [email protected] Tel: (852) 8106 7033 Fax: (852) 8106 7099 1 KBPC25005 THRU KBPC2510 RATING AND CHARACTERISTIC CURVES KBPC25005 THRU KBPC2510 Note: Specifications are subject to change without notice. Website: www.kingtronics.com Email: [email protected] Tel: (852) 8106 7033 Fax: (852) 8106 7099 2