KDT5002A Silicon photo transistor Description The KDT5002A is a high-sensitivity Silicon phototransistor mounted in Φ 5mm(T13/4) plastic package with visible light cutoff filter. This photo transistor is both compact and easy to mount. Features y Φ 5mm(T13/4) all plastic mold type y Visible light cut-off type y Single phototransistor output Applications y Optical counter y Optical detectors y Tape End sensor Absolute Maximum Ratings (at 25℃ unless otherwise noted) Parameter Symbol Rating Unit Collector-emitter voltage BVCEO 35 V Emitter-collector voltage BVECO 6 V Collector current IC 50 mA Collector power dissipation PC 75 mW Operating temperature Topr -20~+85 ℃ Storage temperature Tstg -30~+85 ℃ Soldering temperature *1 Tsol 260 ℃ Notes : *1. For MAX.5 seconds at the position of 2mm from the package The contents of this data sheet are subject to change without advance notice for the purpose of improvement. When using this product, would you please refer to the latest specifications. Rev. date: 31-JAN-11 KSD-XXXXXX-000 KDT5002A Electrical Characteristics Parameter Collector current *2 (at 25℃ unless otherwise noted)) Symbol IL Collector dark current ICEO Collector-emitter saturation voltage VCE(SAT) Spectral sensitivity λ Peak sensitivity wavelength λP Switching time Rise time tr Fall time tf Half intensity angle △θ Conditions Min. Max. Unit mA - 4.5 - 200 - - 0.6 V 700 - - 880 1,050 - nm nm - ±25 - deg. Ev=1000lx, VCE=10V Ev=0, VCE=10V Ev=0.5mW/cm2, IC=1mA - Typ. VCC=5V, IC=1mA, RL=1KΩ - 8.5 8.5 nA µs µs Notes : *2. Ee : Irradiance by CIE standard light source A (2850K tungsten lamp) ■ Switching time test circuit Inspection Criteria ㆍIn electrical and optical characteristics, all products are inspected for following 2 items. ■ Collector Current : ICEL ■ Dark Current : ICEO ㆍNo particular inspections shall be carried out for items other than those above. However they shall satisfy the ratings. Cautions in Usage ㆍStore and use where there is no exterior force that will cause change in shape. ㆍStore and use where there is no Hydrogen Sulfide gas, or any other corrosive gas. ㆍThe bending or cutting of the lead should be done at room temperature, no force being applied on the package. ㆍSolder the lead pin under conditions of the absolute maximum rating chart and do not apply force on the lead pin after soldering. The contents of this data sheet are subject to change without advance notice for the purpose of improvement. When using this product, would you please refer to the latest specifications. Rev. date: 31-JAN-11 KSD-XXXXXX-000 KDT5002A Guarantee Period and Scope ㆍPeriod One year after delivery to the desired place. ㆍScope Replacement of products will be done if any problems lie in our company's products. However, we are not liable for your damage due to lack of caution. Others Any doubts concerning this specification should be discussed fully by both parties. Package Outline Dimensions The contents of this data sheet are subject to change without advance notice for the purpose of improvement. When using this product, would you please refer to the latest specifications. Rev. date: 31-JAN-11 KSD-XXXXXX-000