AUK CORP. SB1316E-V 1. Features ◆ 1.6mm(L)×0.8mm small size surface mount type ◆ Thin package of 0.55mm(H) thickness ◆ Transparent clear lens optic ◆ Low power consumption type chip LED ◆ Emitting Light Blue(470nm) ◆ E ; ESD Protected (±2.0KV, 3 Times @100pF, 1.5KΩ) 2. Applications ◆ LCD backlighting ◆ Keypad backlighting ◆ Symbol backlighting ◆ Front panel indicator lamp 3. Outline Dimensions unit : mm The contents of this data sheet are subject to change without advance notice for the purpose of improvement. When using this product, would you please refer to the latest specifications. Rev.O date: 08-AUG-11 AUK-LDM-001(A) AUK CORP. SB1316E-V 4. Absolute Maximum Ratings (Ta=25oC) Characteristic Symbol Rating Unit Power dissipation PD 68 mW Forward current IF 20 mA *1 Peak forward current IFP 50 mA Operating temperature range Topr Storage temperature range Tstg *2 Soldering temperature Tsol ∼80 ℃ -30∼100 ℃ 240℃ for 10 seconds -25 *1.Duty ratio = 1/16, Pulse width = 0.1ms *2.Recommended reflow soldering temperature profile - Preheating 150 to 185 within 120 seconds soldering 240 Gradual cooling (Avoid quenching) ℃ ℃ ℃ within 10 seconds ℃) Temp ( Peak Temp max. 240 240 ℃ Preheating area 150~185 , 90±30sec ℃ 185 220 150 max. 3 max. 4 Time from 25 25 0 max. 10sec Solder area , max. 60sec ℃ ℃/sec max. -6 ℃/sec ℃/sec ℃ to Peak Temperature max. 6min 60 150 180 240 Time (sec) The contents of this data sheet are subject to change without advance notice for the purpose of improvement. When using this product, would you please refer to the latest specifications. Rev.O date: 08-AUG-11 AUK-LDM-001(A) AUK CORP. SB1316E-V 5. Electrical / Optical Characteristics (Ta=25oC) Characteristic Symbol Test Condition Min Typ Max Unit Forward voltage VF IF= 10mA 2.8 - 3.4 V *3 Luminous intensity IV IF= 10mA 12 - 40 mcd Peak wavelength λP IF= 10mA 460 - 475 nm Spectrum bandwidth ∆λ IF= 10mA - 35 - nm - ±65 - - ±70 - X *4 Half angle θ/2 IF= 10mA Y deg *3.The test result of IF=10mA is only for reference *4.θ /2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity ◆ VF / IV / ℃ λP Grade Classification (Ta=25 ) Test Condition @ IF=10mA Forward Voltage [V] Luminous Intensity [mcd] Peak Wavelength [nm] 1 : 2.8~3.0 A : 12~20 a : 460~465 2 : 3.0~3.2 B : 20~29 b : 465~470 3 : 3.2~3.4 C : 29~40 c : 470~475 (Each VF, IV, λP range did not consider a margin. Please refer to ±0.1V of VF range, ±18% of IV range, ±1nm of λP range as a permitted limit and do not use to combine grade classification. It must be used separately grade classification) * Recommended Soldering Land Pattern The contents of this data sheet are subject to change without advance notice for the purpose of improvement. When using this product, would you please refer to the latest specifications. Rev.O date: 08-AUG-11 AUK-LDM-001(A) AUK CORP. SB1316E-V 6. Characteristic Diagrams Fig. 2 IV - IF Forward Current IF [mA] Luminous Intensity Iv [mcd] Fig. 1 IF - VF Forward Voltage VF [V] Fig. 3 IF – Ta Forward Current IF [mA] Relative Intensity [%] Forward Current IF [mA] Fig.4 Spectrum Distribution Ambient Temperature Ta [ ℃] Fig. 5-1 Radiation Diagram(X) Relative Luminous Intensity Iv [%] Wavelength λ [nm] Fig. 5-2 Radiation Diagram(Y) Relative Luminous Intensity Iv [%] The contents of this data sheet are subject to change without advance notice for the purpose of improvement. When using this product, would you please refer to the latest specifications. Rev.O date: 08-AUG-11 AUK-LDM-001(A)