5.0SMDG Series Rating and Characteristic Curves 5.0SMDG Series VOLTAGE-5.0 TO 170 Volts 5000 Watt Peak Pulse Power Features DO-215AB For surface mounted applications in order to optimize board space Low profile package Built-in strain relief Glass passivated junction Low inductance Excellent clamping capability Repetition rate (duty cycle):0.01% Fast response time: typically less than 1.0 ps from 0 volts to BV for unidirectional types Typical IR less than 1µA above 10V High temperature soldering: 250°C/10 seconds at terminals Plastic package has Underwriters Laboratory Flammability Classification 94 V-O Cathode Band 0.280 (7.11) 0.260 (6.60) 0.016 (0.41) 0.006 (0.15) 0.058 (1.47) 0.038 (0.97) 0.020 (0.51) Max. Case: JEDEC DO-215AB. Molded plastic over glass passivated junction Polarity: Color band denoted positive end (cathode) except Bidirectional Weight: 0.21 grams 0.040 (1.02) 0.024 (0.61) 0.400 (10.16) 0.380 (9.64) Mechanical Data 0.245 (6.22) 0.220 (5.59) 0.125 (3.17) 0.115 (2.92) Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25 oC ambient temperature unless otherwise specified. RATING Peak Pulse Power Dissipation on 10/1000 µs waveform (NOTE 1, 2, Fig.1) Peak Pulse Current of on 10/1000 µs waveform (Note 1,Fig 3) Peak Forward Surge Current, 8.3ms Single Half Sine-wave Superimposed on Rated Load, (JEDEC Method)(Note2, 3) Operatings and Storage Temperature Range SYMBOL VALUE UNITS PPPM Minimum 5000 Watts IPPM SEE TABLE 1 Amps IFSM 400 Amps TJ, TSTG -55 +150 °C NOTES: 1. Non-repetitive current pulse, per Fig.3 and derated above Ta=25 °C per Fig.2. 2. Mounted on 8.0mm x 8.0mm Copper Pads to each terminal. 3. 8.3ms single half sine-wave, or equivalent square wave, Duty cycle=4 pulses per minutes maximum. http://www.luguang.cn mail:[email protected] 5.0SMDG Series Rating and Characteristic Curves 5.0SMDJ Series Fig.2 - Pulse Derating Curve Fig. 1 - Peak Pulse Power Rating Curve 100 Non-repetitive pulse waveform shown in Fig.3 TA = 25°C Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage,% PPPM-Peak Pulse Power (kW) 100 10 1 87.5 75 62.5 50 37.5 25 12.5 0 0 0.1 0.1μs 1.0μs 10μs 100μs 1.0ms 25 50 75 100 125 150 175 200 TA - Ambient Temperature (°C) 10ms Fig.3 - Pulse Waveform 150 tr = 10μsec. Half Value- IPPM 2 1000 100 10/1000μsec.Waveform as defined by R.E.A. 50 10000 td VR = 0 1000 0 2.03.0 1.0 3.0 4.0 4.0 f = 1MHz Vsig = 50mVp-p TJ = 25°C 10 1 5 10 100 10 500 VWM - Reverse Stand-Off Voltage (V) t - Time(ms) Fig.6 - Maximum Non-Repetitive Forward Surge Current Uni-Directional Only Fig. 5 - Steady State Power Derating Curve 8.0 300 8.3ms Single Half Sine-Wave 60Hz Resistive or Inductive Load 7.0 (JEDEC Method)TJ=TJ max. 6.0 250 5.0 4.0 IFSM-Peak Forward Surge Current (A) PM(AV),Steady State Power Dissipation (W) VR = Rated Stand-off 100 10 0 Fig. 4 - Typical Junction Capacitance Unidirectional Bidirectional TJ = 25°C Pulse Width(td)is defined as the point where the peak current decays to 50% of IPPM Peak Value IPPM 100 10000 CJ - Capacitance (pF) IPPM - Peak Pulse Current,% IRSM td - Pulse Width (sec.) 200 3.0 2.0 150 1.0 0 0 25 50 75 100 125 150 175 TL - Lead Temperature (°C) http://www.luguang.cn 200 100 1 10 Number of Cycles at 60 Hz mail:[email protected] 100 1000 5.0SMDG Series Rating and Characteristic Curves 5.0SMDG Series 5000 Watt Surface Mount TVS UNI-POLAR BI-POLAR 5.0SMDG11A 5.0SMDG12A 5.0SMDG13A 5.0SMDG14A 5.0SMDG15A 5.0SMDG16A 5.0SMDG17A 5.0SMDG18A 5.0SMDG20A 5.0SMDG22A 5.0SMDG24A 5.0SMDG26A 5.0SMDG28A 5.0SMDG30A 5.0SMDG33A 5.0SMDG36A 5.0SMDG40A 5.0SMDG43A 5.0SMDG45A 5.0SMDG48A 5.0SMDG51A 5.0SMDG54A 5.0SMDG58A 5.0SMDG60A 5.0SMDG64A 5.0SMDG70A 5.0SMDG75A 5.0SMDG78A 5.0SMDG85A 5.0SMDG90A 5.0SMDG100A 5.0SMDG110A 5.0SMDG120A 5.0SMDG130A 5.0SMDG150A 5.0SMDG160A 5.0SMDG170A 5.0SMDG11CA 5.0SMDG12CA 5.0SMDG13CA 5.0SMDG14CA 5.0SMDG20CA 5.0SMDG20CA 5.0SMDG20CA 5.0SMDG20CA 5.0SMDG20CA 5.0SMDG22CA 5.0SMDG24CA 5.0SMDG26CA 5.0SMDG28CA 5.0SMDG30CA 5.0SMDG33CA 5.0SMDG36CA 5.0SMDG40CA 5.0SMDG43CA 5.0SMDG45CA DEVICE MARKING CODE UNI BI 5PEN 5PEP 5PEQ 5PER 5PES 5PET 5PEU 5PEV 5PEW 5PEX 5PEZ 5PFE 5PFG 5PFK 5PFM 5PFP 5PFR 5PFT 5PFV 5PFX 5PFZ 5PGE 5PGG 5PGK 5PGM 5PGP 5PGR 5PGT 5PGV 5PGX 5PGZ 5PHE 5PHG 5PHK 5PHM 5PHP 5PHR 5BEN 5BEP 5BEQ 5BER 5BES 5BET 5BEU 5BEV 5BEW 5BEX 5BEZ 5BFE 5BFG 5BFK 5BFM 5BFP 5BFR 5BFT 5BFV REVERSE REVERSE BREAKDOWN BREAKDOWN TEST MAXIMUM PEAK VOLTAGE CURRENT CLAMPING VOLTAGE STANDOFF PULSE LEAKAGE VBR (V) VBR (V) VOLTAGE (IT ) VOLTAGE CURRENT @ VRWM VRWM (V) @IPP VC (V) IPP (A) MIN. @ IT MAX. @ IT IR (µA) mA 11.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 20.0 22.0 24.0 26.0 28.0 30.0 33.0 36.0 40.0 43.0 45.0 48.0 51.0 54.0 58.0 60.0 64.0 70.0 75.0 78.0 85.0 90.0 100.0 110.0 120.0 130.0 150.0 160.0 170.0 12.20 13.30 14.40 15.60 16.70 17.80 18.90 20.00 22.20 24.40 26.70 28.90 31.10 33.30 36.70 40.00 44.40 47.80 50.00 53.30 56.70 60.00 64.40 66.70 71.10 77.80 83.30 86.70 94.40 100.00 111.00 122.00 133.00 144.00 167.00 178.00 189.00 13.50 14.70 15.90 17.20 18.50 19.70 20.90 22.10 24.50 26.90 29.50 31.90 34.40 36.80 40.60 44.20 49.10 52.80 55.30 58.90 62.70 66.30 71.20 73.70 78.60 86.00 92.10 95.80 104.00 111.00 123.00 135.00 147.00 159.00 185.00 197.00 209.00 10 10 10 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 18.2 19.9 21.5 23.2 24.4 26.0 27.6 29.2 32.4 35.5 38.9 42.1 45.4 48.4 53.3 58.1 64.5 69.4 72.7 77.4 82.4 87.1 93.6 96.8 103.0 113.0 121.0 126.0 137.0 146.0 162.0 177.0 193.0 209.0 243.0 259.0 275.0 For bidirectional type having Vrwm of 10 volts and less, the IR limit is double. For parts without A , the VBR is ± 10% For Bidirectional use C or CA Suffix for types 5.0SMDG5.0 thru types 5.0SMDG170 (e.g. 5.0SMDG5.0C, 5.0SMDG70CA) Electrical characteristics apply in both directions. http://www.luguang.cn mail:[email protected] 275.0 252.0 233.0 216.0 205.0 193.0 181.0 172.0 155.0 141.0 129.0 119.0 110.0 103.0 93.9 86.1 77.6 72.1 68.8 64.7 60.7 57.5 53.5 51.7 48.6 44.3 41.4 39.7 36.5 34.3 30.9 28.3 26.0 24.0 20.6 19.3 18.2 800 800 500 200 100 50 20 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5