GBU1001-GBU1007 Single Phase10.0AMP.Glass Passivated Bridge Rectifiers GBU Features Ideal for printed circuit board Reliable low cost construction Plastic material has Underwriters Laboratory Flammability Classification 94V-0 High case dielectric strength of 1500VRMS Surge overload rating to 200 amperes peak High temperature soldering guaranteed: 260oC / 10 seconds / .375”, (9.5mm) lead lengths. Mechanical Data Case: Molded plastic body. Weight: 0. 3 ounce, 8.0 grams Mounting torque: 5 in. lb. Max. Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25 oC ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Type Number Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Symbol GBU GBU GBU GBU GBU GBU GBU Units 1001 1002 1003 1004 1005 1006 1007 VRRM 50 100 200 400 600 800 1000 V VRMS 35 70 140 280 420 560 700 V VDC 50 100 200 400 600 800 1000 V Maximum Average Forward Rectified Current @TC = 100 oC Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Maximum Instantaneous Forward Voltage @ 5.0A @ 10A I(AV) 10.0 A IFSM 220 A VF 1.0 1.1 5.0 500 V o Maximum DC Reverse Current @ TA=25 C at Rated DC Blocking Voltage @ TA=125 oC Typical Junction Capacitance (Note 3) Typical Thermal Resistance Per Leg ( Note 1 ) ( Note 2 ) Operating Temperature Range IR Cj RθJA RθJC TJ 211 94 21 2.0 -55 to +150 -55 to + 150 Storage Temperature Range TSTG Notes 1: Units Mounted In Free Air No Heat Sink On PCB 0.5”x 0.5 “ (12mm x 12mm) Copper Pads, 0.375”(9.5mm) Lead Length. 2: Device Mounted on 4” x 6” x 0.25” Plate Heatsink. 3. Measured at 1.0 MHZ and applied Reverse Voltage of 4.0V. http://www.luguang.cn uA uA pF mail:[email protected] o C/W o o C C GBU1001-GBU1007 Single Phase10.0AMP.Glass Passivated Bridge Rectifiers RATINGS AND CHARACTERISTIC CURVES (GBU1001 THRU GBU1007) FIG.1-MAXIMUM FORWARD CURRENT DERATING CURVE FIG.2- TYPICAL REVERSE CHARACTERISTICS PER BRIDGE ELEMENT 500 8 6 4 HEAT-SINK MOUNTG 100mm x 100mm x 1.6 mm Cu. PLATE 2 0 50 100 o CASE TEMPERATURE. ( C) 0 150 INSTANTANEOUS REVERSE CURRENT. (mA) AVERAGE FORWARD CURRENT. (A) 10 100 10 1 50-400V 600-1000V 0.1 Tj=25 0C 0 80 100 20 40 60 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) 120 FIG.3- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PER BRIDGE ELEMENT 225 200 Tj=150 C 8.3ms Single Half Sine Wave 175 150 125 FIG.5- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS PER BRIDGE ELEMENT 100 100 75 50 1 10 20 5 NUMBER OF CYCLES AT 60Hz 2 50 100 40 INSTANTANEOUS FORWARD CURRENT. (A) PEAK FORWARD SURGE CURRENT. (A) 0.01 FIG.4- TYPICAL JUNCTION CAPACITANCE 1000 600 JUNCTION CAPACITANCE.(pF) Tj=150 0C 500 GBU1001-GBU1004 Tj=25 0C 400 300 200 10 4 2 1 Tj=25 0C Pulse Width=300ms 1% Duty Cycle 0.4 GBU1005-GBU1007 0.2 100 0 0.1 20 0.5 1 2 5 10 20 50 100 REVERSE VOLTAGE. (V) http://www.luguang.cn 200 500 800 0.1 0.6 0.7 0.8 0.9 1.0 1.1 1.2 INSTANTANEOUSFORWARD VOLTAGE. (V) 1.3 mail:[email protected] Version: A06