GBL005 - GBL10 Single Phase 4.0 AMPS. Glass Passivated Bridge Rectifiers GBL C2.5 .146(3.70) .130(3.30) .799(20.3) .776(19.7) Features .445(11.3) .421(10.7) UL Recognized File # E-96005 Glass passivated chip junction Ideal for printed circuit board High case dielectric strength Plastic material has Underwriters Laboratory Flammability Classification 94V-0 Typical IR less than 0.1µA High surge current capability High temperature soldering guaranteed: 260 oC / 10 seconds / .375”, (9.5mm) lead lengths. .106(2.70) .091(2.30) .047(1.20) .031(0.80) .067(1.70) .051(1.30) .043(1.10) .035(0.90) .106(2.70) .091(2.30) .551(14.0) .512(13.0) .024(0.60) .016(0.40) 1 2 3 205(5.20) 189(4.80) 4 .205(5.20) .205(5.20) .189(4.80) .189(4.80) 1 2 3 4 Mechanical Data Case: Molded plastic body. Terminals: Pure tin plated, Lead free. leads solderable per MIL-STD-750, Method 2026. Weight: 0. 071 ounce, 2.0 grams Mounting position: Any Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25 oC ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Symbol GBL GBL GBL GBL GBL GBL GBL Units 10 005 01 02 04 06 08 Maximum Recurrent Peak Reverse Voltage V RRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage V RMS 35 70 140 280 420 560 700 V Maximum DC Blocking Voltage V DC 50 100 200 400 600 800 1000 V Type Number Maximum Average Forward Rectified Current @T C = 50 o C (Note 1) @T A = 40 oC (Note 2) Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated o Load (JEDEC method ) T J =150 C I(AV) 4.0 3.0 A IFSM 150 A 2 Rating for fusing (t<8.3ms) I t 93 A 2 sec Maximum Instantaneous Forward Voltage @ 2.0A @ 4.0A VF V Maximum DC Reverse Current @ T A =25 oC at Rated DC Blocking Voltage @ T A =125 oC IR 1.0 1.1 5.0 500 Typical Junction Capacitance Per Leg at 4.0V, 1MHz Cj Typical Thermal Resistance Per Leg (Note 1) (Note 2) R θJA R θJL Operating Temperature Range TJ 95 uA uA 40 22 3.5 -55 to +150 -55 to + 150 Storage Temperature Range T STG 1. Unit Mounted on 2” x 3” x 0.25” Al. plate. Notes 2. Units Mounted on P.C.B. 0.5 x 0.5 “ (12x12mm) Copper Pads, 0.375”(9.5mm) Lead Length pF o C/W o o C C Version: A06 RATINGS AND CHARACTERISTIC CURVES (GBL005 THRU GBL10 ) FIG.1- DERATING CURVE FOR OUTPUT RECTIFIED CURRENT 60 Hz Resistive or Inductive Load Heat-Sink Mounting 2.0 x 3.0 x 0.25" Aluminum Substrate 4.0 3.0 2.0 P.C.B. Mounting 0.47 x 0.47" (12 x 12mm) Copper pads with 0.375" (9.5mm) lead length 1.0 0 0 50 100 O AMBIENT TEMPERATURE. ( C) FIG.2- TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE LEAKAGE CURRENT. (mA) AVERAGE FORWARD RECTIFIED CURRENT. (A) 5.0 500 100 50 600 1 400V 1000V 0.1 Tj=25 0C 0.01 150 0 FIG.3-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PER LEG 150 Tj=125 0C 10 80 20 40 60 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) 100 FIG.4- TYPICAL JUNCTION CAPACTITANCE PER LEG Tj=25 C JUNCTION CAPACITANCE (pF) PEAK FORWARD SURGE CURRENT. (A) 1000 O Tj=40 C Single Half Sine-Wave (JEDEC Method) 100 50 100 50 600 1 Cycle 0 10 NUMBER OF CYCLES 1 100 INSTANTANEOUS FORWARD CURRENT. (A) f = 1 MHz Vsig = 50mVp-p 100 10 0.1 400V 1000V 1 10 REVERSE VOLTAGE. (V) 100 FIG.5- TYPICAL FORWARD VOLTAGE CHARACTERISTICS PER LEG 10 1 0.1 Tj=25 C Pulse Width=300ms 1% Duty Cycle 0.01 0.4 0.6 1.4 0.8 1.0 1.2 INSTANTANEOUS FORWARD VOLTAGE. (V) 1.6 Version: A06