LUGUANG NDF9196

NDF9196
1SAW FILTER 1590 MHz
Features
„ Low-loss RF filter for mobile systems
„ Low amplitude ripple
„ No matching network required for operation at 50Ω
„ Ceramic package for Surface Mounted
Technology (SMT)
„ Lead-free production and RoHS compliant
Package Dimensions
Ceramic Package: DCC6C
Pin Configuration
2
Input
5
Output
1, 3, 4, 6
Ground
Marking
Top View, Laser Marking
"ND”:
“9196”:
“*”:
Code
1
2
2009
A
2010
N
Manufacturer’s mark
“F”:
SAW filter
Part number
” · ”:
Terminal 1
Lot number (The code shown below varies in a 4-year cycle)
3
4
5
6
7
8
B
C
D
P
Q
R
9
E
F
G
H
J
S
T
U
V
W
10
11
12
K
L
M
X
Y
Z
2011
a
b
c
d
e
f
g
h
i
j
k
m
2012
n
p
q
r
s
t
u
v
w
x
y
z
Maximum Ratings
Rating
Input Power Level
P
Value
Unit
10
dBm
DC Voltage
VDC
5
V
Operating Temperature Range
TA
-40 ~ +85
°C
Storage Temperature Range
Tstg
-40 ~ +85
°C
http://www.luguang.cn
Email:[email protected]
NDF9196
1SAW FILTER 1590 MHz
Electrical Characteristics
Item
Center Frequency
Minimum
fC
Insertion Loss
Group Delay Ripple
1591
--
1570.00 …. 1612.00 MHz
Unit
MHz
1.5
10
2.5
40
dB
ns
α
Absolute Attenuation
DC …. 1500.00 MHz
22
25
dB
1536 MHz
30
dB
1646 MHz
30
dB
1700.00 …. 1800.00 MHz
25
29
dB
1800.00 …. 3000.00 MHz
22
28
dB
Amplitude Ripple (p-p) 1570.00 …. 1612.00 MHz
Output
Maximum
IL
1570.00 …. 1612.00 MHz
Intput
Typical
VSWR
VSWR
1570.00 …. 1612.00 MHz
1570.00 …. 1612.00 MHz z
Input / Output Impedance (Nominal)
RoHS Compliant
∆α
0.5
2.0:1
1.8:1
2.0:1
50
Electrostatic Sensitive Device
Typical Frequency Response
http://www.luguang.cn
1.0
1.8:1
Email:[email protected]
dB
Ω
NDF9196
1SAW FILTER 1590 MHz
http://www.luguang.cn
Email:[email protected]
NDF9196
1SAW FILTER 1590 MHz
Stability Characteristics
Test item
Condition of test
1
Mechanical shock
(a) Drops: 3 times on concrete floor
(b) Height: 1.0 m
2
Vibration resistance
(a) Frequency of vibration: 10~55Hz
(c) Directions: X,Y and Z
(b) Amplitude: 1.5 mm
(d) Duration: 2 hours
3
Moisture resistance
(a) Condition: 40°C, 90~95% R.H.
(c) Wait 4 hours before measurement
(b) Duration: 96 hours
4
Climatic sequence
(a) +70°C for 16 hours
(b) +55°C for 24 hours, 90~95% R.H.
(c) -25°C for 2 hours
(d) +40°C for 24 hours, 90~95% R.H.
(e) Wait 4 hours before measurement
5
High temperature exposure
(a) Temperature: 70°C
(c) Wait 4 hours before measurement
6
Thermal impact
(a) +70°C for 30 minutes ⇒ -25°C for 30 minutes repeated 3 times
(b) Wait 4 hours before measurement
(b) Duration: 250 hours
Requirements: The SAW filer shall remain within the electrical specifications after tests.
Remarks
z SAW devices should not be used in any type of fluid such as water, oil, organic solvent, etc.
z Be certain not to apply voltage exceeding the rated voltage of components.
z Do not operate outside the recommended operating temperature range of components.
z Sudden change of temperature shall be avoided, deterioration of the characteristics can occur.
z Be careful of soldering temperature and duration of components when soldering.
z Do not place soldering iron on the body of components.
z Be careful not to subject the terminals or leads of components to excessive force.
z SAW devices are electrostatic sensitive. Please avoid static voltage during operation and storage.
z Ultrasonic cleaning shall be avoided. Ultrasonic vibration may cause destruction of components.
Test Circuit
Recommended Land Pattern
http://www.luguang.cn
Email:[email protected]
NDF9196
1SAW FILTER 1590 MHz
Packing Information
Carrier Tape
Reel Dimensions
Outer Packing
Type
Quantity
Dimension
Description
Weight
Carton Box Ⅰ
10000
190×190×95
0.85
Carton Box Ⅱ
20000
190×190×190
anti-static plastic bag & carton box
1 reel / bag
5 bags / box (10000 pcs)
10 bags / box (20000 pcs)
Unit: mm
http://www.luguang.cn
1.80
Unit: kg
Email:[email protected]
NDF9196
1SAW FILTER 1590 MHz
Recommended Soldering Profile
http://www.luguang.cn
Email:[email protected]