Major League Electronics .100" cl Shrouded Terminal Strip Header Ordering Information SHTSHC-1 XX - D - XX - XXX - XX - XX - XXX - LF Lead Free Pins Per Row 03 - 32 Double Polarized Position 001 - 064 Pin Option Max. Tail Length Select nearest Pin Option greater than specified 'Desired Tail Length' Leave blank if not needed Pin Length (2.54) .100 (10.92) .430 (2.92) .115 (11.30) .445 08 (3.20) .126 (11.58) .456 10 (3.81) .150 (12.19) .480 11 (5.08) .200 (13.46) .530 14 (7.62) .300 (16.00) .630 16 (10.16) .400 (18.54) .730 20 (12.70) .500 (21.08) .830 22 (15.24) .600 (23.62) .930 24 (17.78) .700 (26.16) 1.030 26 (20.32) .800 (28.70) 1.130 28 (22.86) .900 (31.24) 1.230 30 (25.40) 1.000 (33.78) 1.330 32 (27.94) 1.100 (36.32) 1.430 34 (30.48) 1.200 (38.86) 1.530 36 06 Lock Tight "LT" (Optional) LT = With Leave blank if not needed Two tails per strip are crimped in opposing directions on or near the centerline. Must have a minimum dimension of .050". Recommended hole size of .040". 08 = standard option Desired Tail length Please specify e.g. .100 (2.54) = 100 Mates with: IDS-1 Plating Options - 10µ Gold on Contact area/Flash on Tail G GT - 10µ Gold on Contact Area/Matte Tin on Tail - Matte Tin all Over T - Gold Flash Over Entire Pin F Insulator: Polyester UL 94V-0 Nylon-6T Contact: Copper Alloy Insulation resistance: 1000 MOHMS min. Contact Resistance: Current Rating: Dielectric Withstanding: 3 Amps 600V AC Operating Temperature: -40°C to +105°C 20 mOHMS max. Products cut to specific sizes are uncancellable/nonreturnable SHTSHC-1 SERIES .100" cl Shrouded Terminal Strip Header Custom Parts are subject to change without notice 19 APR 07 4235 Earnings Way, New Albany, Indiana, 47150, USA 1-800-782-3486 (USA/Canada/Mexico) Tel: 812-944-7244 Fax: 812-944-7268 E-mail: [email protected] Web: www.mlelectronics.com