Major League Electronics .079" cl Shrouded Terminal Strip Header Ordering Information SHTSHR-2 XX - D - XX - A - XX - XX - XXX - LF Lead Free Pins Per Row 05 - 25 Double Polarized Position 001 - 050 Pin Options Leave blank if not needed Tail Length 2.54 (.100) 02 3.00 (.118) 04 Lock Tight "LT" (Optional) Post Option LT = With Leave blank if not needed Plating Options - 10µ Gold on Contact area/Flash on Tail G GT - 10µ Gold on Contact Area/Matte Tin on Tail - Matte Tin all Over T - Gold Flash Over Entire Pin F Two tails per strip are crimped in opposing directions on or near the centerline. Must have a minimum dimension of .050". Recommended hole size of .040". Mates with: IDS-2 Insulator Contact Polyester UL 94V-0 Nylon 6T Copper Alloy Insulation Resistance 1000 MOHMS min. Contact Resistance Current Rating Dielectric Withstanding 1 Amp 500V AC/DC Operating Temperature -40°C to +105°C 20 mOHMS max. Products cut to specific sizes are uncancellable/nonreturnable SHTSHR-2 SERIES .079" cl Shrouded Terminal Strip Header Right Angle Parts are subject to change without notice 23 APR 07 4235 Earnings Way, New Albany, Indiana, 47150, USA 1-800-782-3486 (USA/Canada/Mexico) Tel: 812-944-7244 Fax: 812-944-7268 E-mail: [email protected] Web: www.mlelectronics.com Revisions Revision B - (30th April 2010) Amendment to Current Rating from 2 to 1 Amp SHTSHR-2 SERIES .079" cl Shrouded Terminal Strip Header Right Angle 23 APR 07 4235 Earnings Way, New Albany, Indiana, 47150, USA 1-800-782-3486 (USA/Canada/Mexico) Tel: 812-944-7244 Fax: 812-944-7268 E-mail: [email protected] Web: www.mlelectronics.com