5W AC-DC Single Output Wall-mounted type ¡ ¡½ E ¡E ¡E ¡E ¡E ¡E ¡E ¡E ¡E ¡E ¡E ¡ E SPECIFICATION Features : Universal AC input / Full range No load power consumption <0.3W Compact size ErP step2 compliant 2 pole Euro plug Class II power (without earth pin) Protections: Short circuit / Overload / Over voltage / Over temperature Pass LPS 100% full load burn-in test Fully enclosed plastic case Low cost, high reliability 2 years warranty GS05E-USB MODEL NO. DC VOLTAGE OUTPUT GS05E-USB Note.2 5V RATED CURRENT 1.00A CURRENT RANGE 0 ~ 1.00A RATED POWER 5W RIPPLE & NOISE (max.) Note.3 80mVp-p ¡Ó Ó¡ 1.0% Note.6 ¡Ó4.0% VOLTAGE TOLERANCE Note.4 4.0% LINE REGULATION LOAD REGULATION Note.5 SETUP, RISE, HOLD UP TIME 300ms, 20ms, 50ms at full load 90 ~ 264VAC 127 ~ 370VDC VOLTAGE RANGE 47 ~ 63Hz FREQUENCY RANGE INPUT EFFICIENCY (Typ.) Note.7 71% AC CURRENT INRUSH CURRENT (max.) LEAKAGE CURRENT(max.) OVERLOAD PROTECTION OVER VOLTAGE OVER TEMPERATURE 0.15A / 100VAC 30A / 230VAC 0.25mA / 240VAC 105 ~ 135% rated output voltage power Protection type : Hiccup mode, recovers automatically after fault condition is removed 105 ~ 200% rated output voltage, detect on main control IC Protection type : Hiccup mode, recovers automatically after fault condition is removed U1 Tj 142 typically (U1) detect on main control IC ¢J ¢J WORKING TEMP. Protection type : Shut down o/p voltage, recovers automatically after temperature goes down -20 ~ +50 (Refer to "Derating curve") WORKING HUMIDITY 20% ~ 90% RH non-condensing ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION ¢J, 10 ~ 95% RH ¡Ó0.03% / ¢J (0 ~ 50¢J) -20 ~ +85 SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes TUV EN60950-1 approved I/P-O/P:4242VDC I/P-O/P:100M Ohms / 500VDC / 25 / 70% RH (Note. 8) Compliance to EN55022 Class B, EN61000-3-2,3 OTHERS EMC EMISSION ¢J EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11, light industry level, criteria A MTBF 1100Khrs min. MIL-HDBK-217F(25 41.54*30.5*20mm (L*W*H) 60g DIMENSION PACKING USB Type A DC OUTPUT CONNECTOR NOTE 1.All parameters are specified at 230VAC input, rated load, 25 ¢J) ¢J 70% RH ambient. 2.DC voltage: The output voltage set at point measure by plug terminal & 50% load. 3.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor. 4.Tolerance: includes set up tolerance, line regulation, load regulation. 5.Line regulation is measured from low line to high line at rated load. 6.Load regulation is measured from 0% to 100% rated load 7.Efficiency is measured at 230VAC. 8.The power supply is considered as an independent unit, but the final equipment still need to re-confirm that the whole system complies with the EMC directives. File Name:GS05E-USB-SPEC 2012-10-01 GS05E-USB 5W AC-DC Single Output Wall-mounted type Mechanical Specification Unit:mm 20 30.5 18.2 30.5 18.07 41.54 14 - USB Type A 1 -V 2 N.C + 3 N.C 4 +V Static Characteristics Derating Curve 100 90 80 60 70 LOAD (%) LOAD (%) 100 -20 10 20 30 Ta ( 40 ¢J) 50 60 50 40 90 95 100 110 120 140 160 180 200 220 240 264 INPUT VOLTAGE (VAC) 60Hz File Name:GS05E-USB-SPEC 2012-10-01 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Mean Well: GS05E-USB