MES30C series

MES30C
16.5~30W AC-DC Single Output and Medical Type Desktop
¡ ¡½
E
¡E
¡E
¡E
¡E
¡E
¡E¡E
¡E
¡E
¡E
¡E
series
Features :
3 pole AC inlet IEC320-C6
£g
Low leakage current <300 A
I
Class power ( with earth pin)
Full output 3~48V safety approval
Protections: Short circuit / Overload / Over voltage / Over temp.
Fully enclosed plastic case
Medical safety approved (MOPP level)
Fix switching frequency and regulation
Topology: Top switch circuit
LED indicator for power on
Approvals: UL / CUL / TUV / CB / CE
2 years warranty
SPECIFICATION
ORDER NO.
MES30C-0P1J MES30C-1P1J MES30C-1-1P1J MES30C-2P1J MES30C-3P1J MES30C-4P1J MES30C-5P1J MES30C-6P1J MES30C-8P1J
SAFETY MODEL NO.
DC VOLTAGE
OUTPUT
MES30C-0
Note.2 3.3V
MES30C-1
MES30C-1-1 MES30C-2
MES30C-3
MES30C-4
MES30C-5
MES30C-6
MES30C-8
5V
7.5V
9V
12V
15V
18V
24V
48V
RATED CURRENT
5A
5A
3.33A
3.33A
2.5A
2.0A
1.66A
1.25A
0.62A
CURRENT RANGE
0 ~ 5A
0 ~ 5A
0 ~ 3.33A
0 ~3.33A
0 ~ 2.5A
0 ~ 2.0A
0 ~ 1.66A
0 ~ 1.25A
0 ~ 0.62A
RATED POWER
16.5W
25W
25W
30W
30W
30W
30W
30W
30W
RIPPLE & NOISE (max.) Note.3 30mVp-p
30mVp-p
40mVp-p
50mVp-p
50mVp-p
60mVp-p
70mVp-p
80mVp-p
100mVp-p
Fixed
VOLTAGE ADJ. RANGE
VOLTAGE TOLERANCE Note.4 8.0%
-5% ~ +8%
¡Ó4.0%
Ó¡ 1.0%
¡Ó4.0%
¡Ó4.0%
Ó¡ 1.0%
¡Ó4.0%
¡Ó3.0%
Ó¡ 1.0%
¡Ó3.0%
¡Ó2.0%
Ó¡ 1.0%
¡Ó2.0%
¡Ó2.0%
Ó¡ 1.0%
¡Ó2.0%
¡Ó2.0%
Ó¡ 1.0%
¡Ó2.0%
¡Ó2.0%
Ó¡ 1.0%
¡Ó2.0%
74%
76%
78%
78%
80%
82%
LINE REGULATION
LOAD REGULATION
¡Ó
Ó¡ 1.0%
Note.6 ¡Ó8.0%
¡Ó1.0%
Note.5
-5% ~ +8%
SETUP, RISE, HOLD UP TIME 300ms, 50ms, 16ms at full load
INPUT
VOLTAGE RANGE
90 ~ 264VAC 135 ~ 370VDC
FREQUENCY RANGE
47~63Hz
EFFICIENCY (Typ.)
56%
AC CURRENT
INRUSH CURRENT (max.)
0.8A / 100VAC
70%
72%
35A / 230VAC
LEAKAGE CURRENT (max.) Note.7 Earth leakage current < 300 A/264VAC , Touch current < 60 A/264VAC
OVERLOAD
PROTECTION OVER VOLTAGE
OVER TEMPERATURE
WORKING TEMP.
WORKING HUMIDITY
ENVIRONMENT STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
SAFETY STANDARDS
SAFETY & WITHSTAND VOLTAGE
ISOLATION RESISTANCE
EMC
(Note. 8)
EMC EMISSION
EMC IMMUNITY
OTHERS
CONNECTOR
NOTE
£g
Protection type : Hiccup mode, recovers automatically after fault condition is removed
Tj 135 typically (IC1) detect on main control IC
Protection type : Shut down o/p voltage, recovers automatically after temperature goes down
¢J
¢J
0 ~ +65 (Refer to "Derating Curve")
20% ~ 90% RH non-condensing
¢J, 10 ~ 95% RH
¡Ó0.03% / ¢J ( 0 ~ 50¢J)
-20 ~ +85
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
ANSI/AAMI ES60601-1, TUV EN60601-1, IEC60601-1 approved
I/P-O/P: 5656VDC , I/P-FG: 2828VDC
I/P-O/P, I/P-FG:100M Ohms / 500VDC / 25 / 70% RH
¢J
Compliance to EN55011(CISPR11) class B, EN61000-3-2,3
Compliance to EN60601-1-2 (EN61000-4-2,3,4,5,6,8,11), light industry level, criteria A
¢J)
MTBF
400Khrs min.
DIMENSION
108*67*36mm (L*W*H)
0.3kg ; 54pcs/ 20kg / CARTON
PACKING
PLUG
CABLE
£g
150~350% rated output power
112 ~ 250% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed
110 ~ 140% rated output voltage
MIL-HDBK-217F (25
£r £r
Standard type P1J: 2.1 * 5.5 * 11mm, turning fork type, center positive for stock ; Other type available by customer requested
SPT-2 16AWG 4FT for 3.3 ~ 7.5V ; UL1185 18AWG 6FT for 9 ~48V
¢J
1.All parameters are specified at 230VAC input, rated load, 25 70% RH ambient.
2.DC voltage: The output voltage set at point measure by plug terminal & 50% load.
3.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor.
4.Tolerence: includes set up tolerance, line regulation, load regulation.
5.Line regulation is measured from low line to high line at rated load.
6.Load regulation is measured from 0% to 100% rated load.
7.Touch current was measured from primary input to DC output.
8.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives.
File Name:MES30C-SPEC 2013-01-15
M
U SE PS -3202C5 sseerrii ee ss
16.5~30W AC-DC Single Output and Medical Type Desktop
Mechanical Specification
Unit:mm
36
SPT-2 16AWG 4ft for 3.3V,5V,7.5V
UL 1185 18AWG 6ft for others
106
36
¡Ó
11
100 10mm
67
SWITCHING ADAPTOR
C"+"
POWER LED
ID 2.1 x OD 5.5
Outside
108
Inside
-V not connected to AC FG
69.9
Plug Assignment
18
33.5
Standard plug: P1J (option)
P1J
67
42
45
3
R1
OUTPUT
CENTER
+
RUBBER FOOTX4
NAME PLATE
Static Characteristics
Derating Curve
100
LOAD (%)
100
LOAD (%)
P/N
50
0
15
30
40 45
Ta (
60
¢J)
70
80
60
0
50
60
70
80
90 100
260
INPUT VOLTAGE
File Name:MES30C-SPEC 2013-01-15