GS12U 12W AC-DC Industrial Adaptor series ■ Features : Universal AC input / Full range No load power consumption< 0.3W Energy efficiency Level Ⅴ Comply with EISA 2007 2 pole USA plug Class II power (without earth pin) Protections: Short circuit / Overload / Over Voltage / Over temperature Pass LPS Fully enclosed plastic case 2 years warranty SPECIFICATION ORDER NO. OUTPUT GS12U05-P1I GS12U07-P1I GS12U09-P1I GS12U12-P1I GS12U15-P1I GS12U18-P1I SAFETY MODEL NO. GS12U05 GS12U07 GS12U09 GS12U12 GS12U15 GS12U18 GS12U24-P1I GS12U24 DC VOLTAGE 5V 7.5V 9V 12V 15V 18V 24V 0.5A RATED CURRENT 2.0A 1.6A 1.33A 1.0A 0.8A 0.67A CURRENT RANGE 0 ~ 2.0A 0 ~ 1.6A 0 ~ 1.33A 0 ~ 1.0A 0 ~ 0.8A 0 ~ 0.67A 0 ~ 0.5A RATED POWER 10W 12W 12W 12W 12W 12.06W 12W RIPPLE & NOISE (max.) Note.2 75mVp-p 90mVp-p 90mVp-p 120mVp-p 150mVp-p 180mVp-p 200mVp-p VOLTAGE TOLERANCE Note.3 ±5.0% ±4.0% ±4.0% ±3.0% ±3.0% ±3.0% ±3.0% LINE REGULATION Note.4 ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% LOAD REGULATION Note.5 ±5.0% ±4.0% ±4.0% ±3.0% ±3.0% ±2.0% ±2.0% 80% 80% 80.5% SETUP, RISE, HOLD UP TIME 500ms, 20ms, 30ms/230VAC 500ms, 20ms, 10ms/115VAC at full load VOLTAGE RANGE 90 ~ 264VAC 135 ~ 370VDC FREQUENCY RANGE INPUT 47 ~ 63Hz EFFICIENCY (Typ.) 76% 78.5% AC CURRENT 0.31A / 115VAC 0.16A / 230VAC INRUSH CURRENT (max.) COLD START 25A / 115VAC LEAKAGE CURRENT (max.) 0.25mA / 240VAC >105% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed OVERLOAD PROTECTION OVER VOLTAGE OVER TEMPERATURE Note.6 78.5% 78.5% 45A / 230VAC 115% ~ 135% Protection type : Clamp by zener diode U1 Tj 140℃ typically (U1) Detect on main control IC Protection type : Shut down o/p voltage, recovers automatically after temperature goes down WORKING TEMP. 0 ~ +50℃ (Refer to "Derating Curve") WORKING HUMIDITY 20% ~ 90% RH non-condensing ENVIRONMENT STORAGE TEMP., HUMIDITY -20 ~ +85℃, 10 ~ 95% RH TEMP. COEFFICIENT ±0.03% / ℃ (0 ~ 40℃) 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes VIBRATION UL60950-1, CSA22.2, BSMI CNS14336 approved SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE I/P-O/P:3KVAC EMC I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH ISOLATION RESISTANCE Compliance to FCC PART 15 / CISPR22 class B, CNS13438 class B EMC EMISSION 1414.6Khrs min. MIL-HDBK-217F (25℃) MTBF OTHERS CONNECTOR NOTE DIMENSION PACKING 65*47*26.5mm (L*W*H) 0.15Kg ; 100pcs / 16Kg / CARTON PLUG See page 2 ; Other type available by customer requested CABLE See page 2 ; Other type available by customer requested 1.All parameters are specified at 115VAC input, rated load, 25℃ 70% RH ambient. 2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor. 3.Tolerance: includes set up tolerance, line regulation, load regulation. 4.Line regulation is measured from low line to high line at rated load. 5.Load regulation is measured from 10% to 100% rated load. 6.The over temperature protection (OTP) is the built-in function of the control IC (U1). The activating level described above is based on the specification provided by the IC manufacturer. File Name:GS12U-SPEC 2015-05-20 GS12U 12W AC-DC Industrial Adaptor Mechanical Specification series Unit:mm UL1185 16AWG 1230±50mm for 5~9V UL1185 18AWG 1830±50mm for 12~24V 17±1 26.5±1 30±10mm 6.3±0.3 65±1 47±1 ID 2.1 x OD 5.5 C"+" 9.5±0.5mm Plug Assignment Standard plug: P1I P1I 1.5±0.2 P/N OUTPUT CENTER + 12.7±0.4 Derating Curve OUTPUT VOLTAGE (V) LOAD (%) 100 70 0 10 20 30 40 AMBIENT TEMPERATURE (℃) 50 32 300 28 250 24 200 20 150 16 100 12 50 8 25 50 70 90 110 120 140 160 180 200 220 240 OUTPUT RIPPLE (mVp-p) Static Characteristics(24V) 264 INPUT VOLTAGE(VAC)60Hz File Name:GS12U-SPEC 2015-05-20