HLG-120H-C 150W Single Output LED Power Supply s e r ie s ■ ‧ ‧ ‧ ‧ ‧ ‧ ‧ ‧ ‧ ‧ ‧ Bauar t ge pr uf t Sicher heit egel ma ge od o s b e w ac g IP65 IP67 www. tuv .com ID 200000 0000 SPECIFICATION MODEL RATED CURRENT CURRENT ACCURACY OUTPUT HLG-120H-C350 HLG-120H-C500 HLG-120H-C700 HLG-120H-C1050 HLG-120H-C1400 350mA ±5.0% 500mA 700mA 1050mA 1400mA CONSTANT CURRENT REGION Note.6 215 ~ 430V 150V ~ 300V 107V ~ 215V 74V ~ 148V 54V ~ 108V RATED POWER RIPPLE CURRENT 150.5W ±5% 150W 150.5W 155.4W 151.2W RIPPLE & NOISE 1Vp-p 1Vp-p Can be adjusted by internal potentiometer (A type) 0.5Vp-p 0.5Vp-p 0.5Vp-p 175 ~ 350mA 350 ~ 700mA 525 ~ 1050mA 700 ~ 1400mA ±1% ±1% CURRENT ADJ. RANGE ±1% ±1% 2000ms, 80ms / 115VAC at full load HOLD UP TIME (Typ.) 16ms at full load Note.2 90 ~ 305VAC VOLTAGE RANGE FREQUENCY RANGE 47 ~ 63Hz INPU T ±1% 1000ms, 80ms / 230VAC at full load 230VAC / 115VAC 127VDC ~ 431VDC POWER FACTOR (Typ.) PF>0.98/115VAC, PF>0.96/230VAC, PF>0.94/277VAC at full load (Please re fer to "Power Factor Characteri stic" curve) EFFICIENCY (Typ.) 93.5% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) PROTECTION 250 ~ 500mA LINE REGULATION SETUP, RISE TIME A / 115VAC A / 230VAC / 277VAC μs measured at 50% Ipeak) at 230VAC LEAKAGE CURRENT COLD START 70A(twidth= <0.75mA / 277VAC SHORT CIRCUIT Hiccup mode, recovers automatically after fault condition is removed OVER VOLTAGE 475 ~ 495 V 335 ~ 355V 240 ~ 260V 165 ~ 175V Protecti on type : Shut down o/p voltage with auto -recovery or re-power on to recovery OVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION 120 ~ 130V 85℃±10℃ (RTH2) Protecti on type : Shut down o/p voltage, re-power on to rec over -40 ~ +70℃ (Refer to "Derating Curve") 10 ~ 95% RH non-condensing -40 ~ +80℃, 10 ~ 95% RH ±0.03%/℃ (0 ~ 50℃) 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes SAFETY STANDARDS Note.3 UL8750, CSA C22.2 No. 250.0-08, EN61347-1, EN61347-2-13, EN62384 independent, IP65 or IP67 approved SAFE TY & EMC WITHSTAND VOLTAGE I/P-O/P:3.75KVAC ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH Compliance to EN55015, EN61000-3-2 Class C (≧50% load) ; EN61000-3-3 EMC EMISSION EMC IMMUNITY MTBF OTHERS DIMENSION PACKING NOTE I/P-FG:2KVAC O/P-FG:0.5KVAC Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, heavy industry level (surge L,N-FG: 4KV), criteria A K hrs min. MIL-HDBK-217F (25℃) 220*68*38.8mm (L*W*H) Kg; 12pcs/ Kg/0.8CUFT ℃ File Name:HLG-120H-C-SPEC 2013-02-08 HLG-120H-C 150W Single Output LED Power Supply Mechanical Specification Case No.994A s e r ie s Unit:mm A Type:(HLG-120H-C_A ) 220 12 196 9.6 FG (G reen /Yellow) AC /L( Br own ) AC /N(Blu e) Io ADJ. 300± 20 T case 98 300±20 -V(Bl ack) +V(R ed) SJTW 16AWG× 3C STW 16AWG×2C ψ4 .2 ×4PL ※ T case: Max. Case Temperat ure. ※ IP65 rated. Output volt age and constant cur rent level can be adjust ed through internal potentiometer. (Can access by removing the rubber st opper on the case.) B Type:(HLG-120H-C_B) 220 12 196 9.6 300±20 FG (G reen /Yellow) AC /L( Br own ) AC /N(Blu e) SJTW 16AWG× 2C 300± 20 T case 98 STW 16AWG×2C S JTW 16 AWG× 3C DIM+ (Blue) DIM- (White) -V(Bl ack) +V(R ed) ψ4 .2 ×4PL ※ T case: Max. Case Temperat ure. D Type:(HLG-120H-C_D) 220 12 196 9.6 300± 20 FG (G reen /Yellow) AC /L( Br own ) AC /N(Blu e) T case 98 300±20 SJTW 16AWG× 3C -V(Bl ack) +V(R ed) STW 16AWG×2C ψ4 .2 ×4PL ※ T case: Max. Case Temperat ure. ※ IP67 rat ed. Timer dimming func tion, contact MEAN WELL for details. File Name:HLG-120H-C-SPEC 2013-01-28 HLG-120H-C 150W Single Output LED Power Supply s e r ie s Block Diagram PFC fosc : 70KHz PWM fosc : 60KHz EMI FILTER & RECTIFIERS I/P RECTIFIERS & FILTER POWER SWIT CHING PFC CIRCUIT +V -V DIM+ DIM(B Type) O.L.P. O.T.P. FG O.L.P. DE TECTION CIRCUIT P WM & PFC CONTROL O.V.P. Derating Curve Static Characteristics 100 100 90 80 80 70 60 60 40 50 20 -40 40 -30 -15 0 15 30 50 60 70 (HORIZONTAL) 90 100 125 AMBIENT TEMPERATURE (℃) 135 145 155 165 175 180 200 230 305 INPUT VOLTAGE (V) 60Hz Power Factor Characteristic Constant Current Mode 1 .0 0 0 .9 8 0 .9 6 0 .9 4 0 .9 2 0 .9 0 0 .8 8 0 .8 6 0 .8 4 0 .8 2 0 .8 0 0 .7 8 2 7 7 V ac 2 3 0 V ac 1 1 5 V ac 50% 60% 70% 80% 9 0% 100% (150W) LOAD File Name:HLG-120H-C-SPEC 2013-01-28 150W Single Output LED Power Supply HLG-120H-C s e r ie s EFFICIENCY vs LOAD (HLG-120H-C700A Model) HLG-120H-C series posses s superior worki ng effi ciency that up to 93.5% can be reached in field applications . 96 92 88 84 277Vac 80 230Vac 115Vac 76 72 68 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% LOAD DRIVING METHODS OF LED MODULE A typical LED power supply may w ork in "constant current mode ( CC)" to drive the LEDs. Mean Well's LED power supply wit h CC char acter ist ic can be operated at CC mode (direc t drive). 100 Constant Current area 50 50 100 Io (%) Typical LED power supply I-V curve File Name:HLG-120H-C-SPEC 2013-03-08 HLG-120H-C 150W Single Output LED Power Supply s e r ie s DIMMING OPERATION FG (G reen /Yellow) AC /L( Br own ) AC /N(Blu e) DIM+ (Blue) DIM- (White) HLG-120H-C B Type -V(Bl ack) +V(R ed) ※ Built -i n 3 in 1 dimming func tion, IP67 rated. Outpu t constant current lev el can be adjusted through out put cable by connecting a resistance or 1 ~ 10Vdc or 10V PWM si gnal between DIM+ and DIM-. ※ Please DO NOT connect "DIM-" to "-V ". ※ Reference resistance value for output curr ent adjustment (Typical) Resistance value 10KΩ 20KΩ 30KΩ 10% 20% 30% Percentage of rated current ※ ※ 40KΩ 50KΩ 40% 60KΩ 70KΩ 50% 60% 70% 80KΩ 90KΩ 100KΩ 80% 90% 100% 102%~108% OPEN 1 ~ 10V dimm ing functi on for o utpu t current adjustm ent (Typical ) Dimming value 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V OPEN Percentage of rated current 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 102%~108% 10V PWM si gnal for ou tput cur rent adj ustmen t (Typical): Frequency range :100Hz ~ 3KHz Duty value 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Percentage of rated current 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 102%~108% OPEN ※Using the built-in dimming function on B- type model can't t ur n t he lighting f ixture tot ally dark. Please refer t o the connect ion method below to achieve 0% brightness of the lighting fixture connecting to the LED power supply unit. ※Direct connecting to LEDs is suggested, but is not suitable for using additional dr ivers. Dimming connecti on diagram for turni ng the l ighting fixt ur e ON/OFF : N FG L Switch Relay Adjuster 0~100K Ohms r esistance 1~10V DC Voltage 10V P WM Signal Green/ Yellow Brown Blue AC/L HLG-120H-C B Type AC/N DIM+ DIMV(-) V(+) Blue White Black Red LED Lighting Fixture Using a switch and relay can turn ON/ OF F the lighting fixt ur e. 1.Output constant cur rent level can be adjusted through output cable by connecting a resistance or 1~10Vdc or 10V PWM signal between DIM+ and DIM-. 2.The LED lighting fixture can be turned ON/OFF by the switch. File Name:HLG-120H-C-SPEC 2012-12-04 HLG-120H-C 150W Single Output LED Power Supply s e r ie s WATERPROOF CONNECTION ◎ Waterproof connector Waterproof connector can be assembled on t he output cable of HLG-120H-C to operate in dry/wet/damp or outdoor environment. AC so ur c e HLG-120H-C I/P Size O/ P Pin Confi gurati on ( Femal e) M12 Order No . Suitable Current 4-PI N 5A/P IN M12-04 10A max. 5 -PIN 5A/PI N M12-0 5 10A max . Si ze Pin Configuration (Female) M 15 2-PI N 12A/P IN M15-02 12A max. Order No . Suitable Current LED Lamp ◎ Cable Joiner 66 26 CJ04-1 suitable for 14AWG~16AWG CJ04-2 suitable for 18AWG~22AWG 20 Up to four wires can be connected through this cable joiner by soldering or clamping by tools. LED Lamp HLG-120H-C O/P W ires ※CJ04 cable joiner can be purchased independently for user's own assembly. MEA N WELL or der No. : CJ 04-1, CJ04-2. File Name:HLG-120H-C-SPEC 2012-12-04