Europe: +49 / 7731 8399 0 | Email: [email protected] Item No.: USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] 2270015127 Item: MK07-BV15127 MK07-1A75B-400X Magnetic properties Pull-In Test equipment Conditions Min at 20°C Special Product Data Contact - form Contact rating Switching voltage Carry current Switching current Sensor-resistance Housing material Case colour Sealing compound Cable material Typ Max Unit KMS-18 with an insertion and PK002 Conditions Min Typ Max Unit A - NO not to exceed their individual max.'s DC or Peak AC DC or Peak AC DC or Peak AC measured with 40% overdrive Environmental data Conditions Operating temperature Operating temperature Storage temperature cable not moved cable moved Cable specification Conditions Cable type Overall length cable Cross section Connector Polyamid black Polyurethan PVC Min Typ Max Unit Min Typ Max Unit round cable Tolerance according to drawing 0,14 sq-mm individual crimped terminals Conditions General data Min Mounting advice Mounting advice Mounting advice Typ Max Unit Decreased switching distances by mounting on iron. Magnetically conductive screws must not be used. over 5m cable, a resistor is recommended. Modifications in the sense of technical progress are reserved Designed at: 26.02.09 Designed by: MPOTUZAK Approval at: 27.02.09 Approval by: DSTASTNY Last Change at: 05.03.09 Last Change by: MPOTUZAK Approval at: 05.03.09 Approval by: DSTASTNY Version: 02