Europe: +49 / 7731 8399 0 | Email: [email protected] Item No.: USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] 9145903054 Item: MK14-1C90E-500W Magnetic properties Pull-In Test equipment Conditions Min Typ at 20°C Special Product Data Contact - form Contact rating Switching voltage Carry current Switching current Sensor-resistance Housing material Case colour Sealing compound Max Unit Max Unit KMS-13 Conditions Min Typ Form C - Changeover not to exceed their individual max.'s DC or Peak AC DC or Peak AC DC or Peak AC measured with 40% overdrive Environmental data Conditions Operating temperature Operating temperature Storage temperature Safety class Shock Vibration cable not moved cable moved Cable specification Conditions Cable type Overall length cable Cable material Cross section PBT glass fibre reinforced black Polyurethan Min Typ Max Unit Min Typ Max Unit Max Unit DIN EN 60529 1/2 sine wave duration 11ms from 10 - 2000 Hz single wires Tolerance according to drawing PVC 0,14 sq-mm Conditions General data Min Mounting advice Mounting advice Mounting advice Typ Decreased switching distances by mounting on iron. Magnetically conductive screws must not be used. over 5m cable, a resistor is recommended. Modifications in the sense of technical progress are reserved Designed at: Last Change at: 18.03.09 Designed by: Last Change by: MPOTUZAK Approval at: Approval at: 19.03.09 Approval by: Approval by: DSTASTNY Version: 05