Metallized Polypropylene Film Capacitors DMPP Series (Radial Dipped) MERITEK FEATURES • • Low dissipation factor and high insulation resistance High stability of capacitance and DF versus temperature and frequency Non-inductive construction Self-healing properties Flame retardant epoxy resin coating • • • SPECIFICATIONS 1. Operating temperature: -55oC to +105oC 2. Capacitance range: 3. Capacitance tolerance: 0.01μF to 3.3μF ±5%(J), ±10%(K), ±20%(M) 4. Rated voltage: 100VDC, 250VDC, 400VDC, 630VDC 5. Dissipation factor: 6. Insulation resistance: 0.1% max. at 1KHz, 25oC >30000MΩ (C ≤ 0.33μF) >10000MΩ • μF (C > 0.33μF) DMPP are constructed with metallized polypropylene film dielectric, tinned copper leads, and an epoxy resin coating. They are suitable for blocking, bypassing, coupling and decoupling, filtering, timing, tuning, and temperature compensation. DMPP are ideal for use in telecommunication equipment, data processing equipment, industrial instruments, automatic control systems, and other devices. *Voltage derated at operating temperature >85oC PART NUMBERING SYSTEM DMPP 103 J 2A Meritek Series Capacitance CODE ( pF ) ( nF ) ( μF ) 103 10,000 10 0.01 104 100,000 100 0.1 105 106 1000 1 10 Tolerance CODE Tolerance (%) J ±5 K ± 10 M ± 20 Rated Voltage CODE 1H 50V 2A 100V 2E 250V 2G 400V 2J 630V Tape & Reel/Tape & Ammo available for lead space < 10 mm Please contact factory for part number. Dimensions in millimeters (mm) Rated Voltage DIM. 50VDC/100VDC W 250VDC 400VDC 630VDC H T P± 1 dØ W H T P± 1 dØ W H T P± 1 dØ W H T P± 1 dØ 0.6 CAP(μF) 0.01 14.0 11.0 7.0 10.0 0.6 14.0 11.0 7.0 10.0 0.6 14.0 11.0 7.0 10.0 0.6 14.0 11.0 7.0 10.0 0.015 14.0 11.0 7.0 10.0 0.6 14.0 11.0 7.0 10.0 0.6 14.0 11.0 7.0 10.0 0.6 14.0 13.0 7.0 10.0 0.6 0.022 14.0 11.0 7.0 10.0 0.6 14.0 11.0 7.0 10.0 0.6 14.0 11.0 7.0 10.0 0.6 20.0 13.0 7.0 15.0 0.6 0.033 14.0 12.0 8.0 10.0 0.6 14.0 12.0 8.0 10.0 0.6 14.0 12.0 8.0 10.0 0.6 20.0 13.0 8.0 15.0 0.6 0.047 14.0 11.0 7.0 10.0 0.6 14.0 12.0 8.0 10.0 0.6 20.0 13.0 8.0 15.0 0.6 20.0 14.5 9.0 15.0 0.6 0.068 14.0 11.0 7.0 10.0 0.6 14.0 11.0 7.0 10.0 0.6 20.0 13.0 8.0 15.0 0.6 26.0 14.5 9.0 21.0 0.8 0.1 14.0 10.0 6.0 10.0 0.6 14.0 11.0 8.0 10.0 0.6 20.0 13.0 8.0 15.0 0.8 26.0 16.0 10.0 21.0 0.8 0.15 18.0 12.0 7.0 15.0 0.6 20.0 12.5 8.0 15.0 0.8 26.0 14.5 8.0 22.5 0.8 26.0 18.0 11.5 21.0 0.8 0.22 18.0 12.0 7.0 15.0 0.8 20.0 13.0 9.0 15.0 0.8 26.0 15.0 10.0 22.5 0.8 32.0 20.0 11.5 27.5 0.8 0.33 18.0 13.0 8.0 15.0 0.8 20.0 15.0 10.0 15.0 0.8 26.0 19.0 11.0 22.5 0.8 32.0 22.0 13.0 27.5 0.8 0.47 18.0 15.0 10.0 15.0 0.8 26.0 16.0 10.0 20.0 0.8 32.0 18.0 11.0 27.5 0.8 32.0 24.0 15.0 27.5 0.8 0.56 18.0 17.0 12.0 15.0 0.8 26.0 17.0 10.5 20.0 0.8 32.0 20.0 11.5 27.5 0.8 36.0 25.5 17.5 31.0 0.8 0.68 24.0 16.0 9.5 20.0 0.8 26.0 19.0 11.0 20.0 0.8 32.0 21.5 12.0 27.5 0.8 36.0 26.0 18.0 31.0 0.8 1.0 24.0 17.5 11.0 20.0 0.8 32.0 20.0 11.5 27.5 0.8 32.0 25.0 16.0 27.5 0.8 1.5 32.0 18.0 12.0 27.5 0.8 32.0 22.5 13.5 27.5 0.8 2.2 32.0 20.0 12.0 27.5 0.8 32.0 24.0 15.0 27.5 0.8 3.3 32.0 24.0 16.0 27.5 0.8 36.0 27.0 17.0 31.0 0.8 Custom sizes and lead spacing available upon request Custom values and tolerances available upon request Specifications are subject to change without notice. rev.6a