NICHIA NUB206E

Product Guide(UTZ-SC0294_0)
2011/11/15
LD Receptacle Module (Blue Laser Type)
NUB206E
Engineering Sample
Specifications
• Operating Current: 1.2A
• Ferrule Type: SC
Absolute Maximum Ratings
Item
Symbol
Absolute Maximum Ratings
Unit
Forward Current
Allowable Reverse Current
Storage Temperature
Operating Case Temperature
If
Ir (LD)
Tstg
Tc
1.7
85
-40 ~ 85
15 ~ 35
A
mA
°C
°C
Initial Electrical/Optical Characteristics *
Item
Symbol
(Tc=25°C)
Test Condition
Forward Current
If
CW
Optical Fiber Output Power
Po
If=1.2A
Dominant Wavelength
λd
If=1.2A
Threshold Current
Ith
CW
Slope Efficiency
η
CW
Operating Voltage
Vop
If=1.2A
Beam Divergence
If=1.2A
θ
Full Angle (1/e2)
* Core Diameter=40µm, NA=0.20, Fiber Length=1.0m
Min
Typ.
Max
Unit
1.3
445
0.6
-
140
1.3
5.0
1.2
450
220
2.0
6.0
A
W
nm
mA
W/A
V
-
13
19
deg.
All figures in this specification are measured by Nichia's method and may contain measurement deviations.
The above specifications are for reference purpose only and subjected to change without prior notice.
Outline Dimension
2
Protection Device
2
1. LD Anode
2. LD Cathode
Φ9.5±0.1
3±0.1
NUB206E
1
15.6Max
1.5±0.1
Φ11±0.1
8 Max
LD
10±0.2
000001
1
6.5±0.5
2-Φ0.45±0.1
Pin Connection
Φ2.54±0.2
0.2±0.15
Serial Number
7 Max
Φ10±0.1
Unit (mm)
NICHIA CORPORATION
http://www.nichia.co.jp
HEADQUARTERS
491 Oka, Kaminaka-Cho, Anan-Shi, TOKUSHIMA 774-8601, JAPAN
PHONE: +81-884-22-2311
FAX: +81-884-21-0148
CONTACT
TOKYO SALES OFFICE
13F Tamachi Center Building 34-7, Shiba 5-Chome, Minato-ku, TOKYO 108-0014, JAPAN
PHONE: +81-3-3456-3108
FAX: +81-3-5440-7330
-1-
Product Guide(UTZ-SC0294_0)
2011/11/15
Cautions
(1) Safety of Laser light
Laser light can damage the human eyes and skin. Do not expose the eye or skin
to any laser light directly and/or through optical lens. When handling the LD
Receptacle Modules, wear appropriate safety glasses to prevent laser light, even
any reflections from entering to the eye. Focused laser beam through optical
instruments will increase the chance of eye hazard.
These LD Receptacle Modules are classified in Class 4 of the IEC60825-1 and
21 CFR Part 1040.10 Safety Standards. It is absolutely necessary to take overall
safety measures against User's modules, equipment and systems into which Nichia
LD Receptacle Modules are incorporated and/or integrated.
(2) Operating method
The LD Receptacle Module shall change its forward voltage requirement and optical output power according to
temperature change. Also, the LD Receptacle Module will require more operation current to maintain same output
power as it degrades.
Confirm that electrical spike current generated by switching on and off does not exceed the maximum operating
current level specified herein above as absolute max rating. Also, employ appropriate countermeasures to reduce
chattering and/or overshooting in the Circuit.
ACC (Auto Current Control) mode is recommended for the Product operation. Also, please be careful for the
overshooting in order to avoid excessive optical output power as the laser operation is started.
(3) Static Electricity
Static electricity or electrical surges will reduce and degrade the reliability of the LD Receptacle Modules. It is
recommended to use a wrist strap or anti-electrostatic glove when handling the Product.
(4) Absolute Maximum Rating
Active layer of LD Receptacle Modules shall have high current density and generate high electric field during its
operation. In order to prevent excessive damage, the LD Receptacle Module must be operated strictly below Absolute
Max Rating.
(5) Others
Nichia LD Receptacle Modules described in this brochure are intended to be used for ordinary electronic equipment
(such as office equipment, communications equipment, measurement instruments and household appliances). Consult
Nichia’s sales staff in advance for information on the applications in which exceptional quality and reliability are
required, particularly when the failure or malfunction of the LD Receptacle Modules may directly jeopardize life or
health (such as for airplanes, aerospace, submersible repeaters, nuclear reactor control systems, automobiles, traffic
control equipment, life support systems and safety devices).
Nichia prohibit Purchaser from reverse engineering, disassembling, or taking any other steps to derive the structure or
design of the LD Receptacle Module.
The appearance and specifications of the product may be modified for improvement without notice. The formal
specifications must be exchanged and signed by both parties before large volume purchase begins.
-2-