Multilayer Ceramic Chip Capacitors FEATURES • X7R, X5R AND Y5V DIELECTRICS • HIGH CAPACITANCE DENSITY • ULTRA LOW ESR & ESL • EXCELLENT MECHANICAL STRENGTH • NICKEL BARRIER TERMINATIONS • RoHS COMPLIANT • SAC SOLDER COMPATIBLE* Temperature Coefficient Capacitance Range Capacitance Tolerance Operating Temperature Range Temperature Characteristics Rated Voltages Dissipation Factor insulation Resistance Dielectric Withstanding Voltage NMC High CV Series RoHS Compliant Includes all homogeneous materials *See Part Number System for Details X7R 1.0μF ~ 10μF 10% (K) & 20% (M) -55°C ~ +125°C ±15% Δ Cap. X5R Y5V 1.0μF ~ 100μF 1.0μF ~ 100μF 10% (K) & 20% (M) +80%/-20% (Z) -55°C ~ +85°C -30°C ~ +85°C ±15% Δ Cap. +22%, -82% Δ Cap. 4Vdc, 6.3Vdc, 16Vdc, 25Vdc, 50Vdc & 100Vdc See Sizes & Values Tables 100Megohm/μF minimum @ +25°C 250% of Rated Voltage for 5 ± 1 sec., 50mA max. 150% of Rated Voltage for 5 ± 1 sec., 50mA max. C < 10μF 1KHz, 1.0V ±0.2Vrms (ALC on) 1KHz, 1.0V ±0.1Vrms (ALC on) Test Conditions (EIA-198-2E) C > 10μF 120Hz, 0.5V ±0.2Vrms (ALC on) *Reflow soldering is recommended. Contact NIC regarding the use of other soldering methods. Capacitance value stability over applied VDC is not assured for class II MLCC (X7R, X5R & Y5V) and it is suggested to consider to use NPO MLCCs Ceramic Capacitors, Film Capacitors or Electrolytic Capacitors for applications where stability in capacitance value, over applied VDC, is performance requirement. For additional information go to: http://www.niccomp.com/help/VoltageCoefficientofCapacitors-032012-R1.pdf. PART NUMBER SYSTEM NMC 0603 Y5V 105 Z 25 TRP or TRPLP 3K F RoHS Compliant Optional Reel Qty (3K = 3,000pcs) Tape & Reel (Embossed Plastic Carrier) Tape & Reel (Punched carrier) Voltage (Vdc) Capacitance Tolerance Code (see chart) Capacitance Code, expressed in pF, first 2 digits are significant, 3rd digit is no. of zeros Temperature Characteristic (X7R, X5R OR Y5V) Size Code (see chart) Series Typical ESR versus Frequency Typical Capacitance versus Bias Voltage ® NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com 1 Multilayer Ceramic Chip Capacitors NMC High CV Series X7R HIGH CV CAPACITOR VALUES AND SIZES (mm) EIA Case Size Length (L) Width (W) Thickness max. (T) Termination Width (P) Capacitance 1.0μF 1.5μF 2.2μF 3.3μF 4.7μF 10μF 0603 1.6 ± 0.15 0.8 ± 0.15 1.0 0.1 ~ 0.65 6.3V 10 5% 10% 16 5% 0805 2.0 ± 0.2 1.25 ± 0.2 1.35 0.25 ~ 0.75 Working Voltage (Vdc) 10 16 25 6.3 5% 3.5% 5% 6.3 1206 3.2±0.2 1.6±0.2 1.90 0.25 ~ 0.85 10 5% 10%* 5%* 5%* 5%* 5% 10%* 5% 10%* 5% 15%* 10% 5% * 1.45mm maximum thickness, **2.20mm maximum thickness 16 5% 25 3.5% 5% 5% 5% 3.5%** 3.5% 3.5% 3.5% 35 50 3% Percentages in the table represent the dissipation factor for that value. X7R HIGH CV CAPACITOR VALUES AND SIZES (mm) EIA Case Size Length (L) Width (W) Thickness max. (T) Termination Width (P) Capacitance 1.0μF 1.5μF 2.2μF 3.3μF 4.7μF 10μF 1210 3.2±0.2 2.5±0.2 2.20 0.25 ~ 1.00 10 5% 5% 16 3.5% 3.5% 3.5% 25 3.5% 35 50 3.5% 1812 4.5±0.4 3.2±0.3 1.8 0.25 ~ 1.5 Working Voltage (Vdc) 100 10 16 25 50 2.5%** 5% 3.5% 3.5% 2.5%* 2225 5.7±0.4 6.35±0.25 2.20 0.25 ~ 1.02 100 2.5%* 3.5% 3.5% 5% 2.5%** 5%** *2.20mm maximum thickness, **2.80mm maximum thickness 25 2.5% 2.5% 2.5% 50 2.5% 100 2.5% Percentages in the table represent the dissipation factor for that value. (CONSULT FACTORY FOR CAPACITANCE VALUES NOT LISTED) W T P P L 100% Sn over Ni barrier ® 2 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com Multilayer Ceramic Chip Capacitors NMC High CV Series X5R HIGH CV CAPACITOR VALUES AND SIZES (mm) EIA Case Size Length (L) Width (W) Thickness max. (T) Termination Width (P) Capacitance 1.0μF 1.5μF 2.2μF 3.3μF 4.7μF 6.8μF 10μF 22μF 47μF 0402 1.0 ± 0.05 0.5 ± 0.05 0.6 0.1 ~ 0.3 4 6.3 10% 10 15% 10% 10% 10% 12.5%* 16 10% 0603 1.6 ± 0.15 0.8 ± 0.15 1.0 0.1 ~ 0.65 Working Voltage (Vdc) 6.3 10 16 25 10% 10% 5% 5% 4 10% 10% 10% 10% 12.5% 10% 0805 2.0 ± 0.2 1.25 ± 0.2 1.45 0.20 ~ 0.75 4 3.5% 5% 10% 6.3 10% 10 7.5% 16 5% 25 5% 10% 10% 10% 10% 10% 10% 5% 5% 10% 10% 10% 15% 10% 10% 10% *T max. 0.65mm, L & W tolerance -0/+0.15mm Percentages in the table represent the dissipation factor for that value. X5R HIGH CV CAPACITOR VALUES AND SIZES (mm) EIA Case Size Length (L) Width (W) Thickness max. (T) Termination Width (P) Capacitance 1.0μF 1.5μF 2.2μF 3.3μF 4.7μF 6.8μF 10μF 22μF 47μF 100μF 1206 3.2±0.2 1.6±0.2 1.90 0.25 ~ 0.85 4 1210 3.2±0.3 2.5±0.2 2.2 0.25 ~ 1.0 6.3 10 16 10% 10% 10% 10% 10% 10% 10% 7.5% 7.5% 7.5% 5% 5% 5% 5% 5% 3.5% 3.5% 3.5% 5% 16 25 35 3.5% 10% 5% 10% 5% 10%* 10%* 10% 10%* 10%* 15%* *Length 3.2mm ± 0.4mm, 2.8mm maximum thickness (CONSULT FACTORY FOR CAPACITANCE VALUES NOT LISTED) 10% 10% 10% Working Voltage (Vdc) 25 6.3 10 5% 3.5% 3.5%* 5% 5%* 5%* 5%* 10% Percentages in the table represent the dissipation factor for that value. W T P P L 100% Sn over Ni barrier ® NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com 3 Multilayer Ceramic Chip Capacitors NMC High CV Series Y5V HIGH CV CAPACITOR VALUES AND SIZES (mm) EIA Case Size Length (L) Width (W) Thickness max. (T) Termination Width (P) Capacitance 1.0μF 1.5μF 2.2μF 3.3μF 4.7μF 6.8μF 10μF 22μF 0402 1.0 ± 0.05 0.5 ± 0.05 0.6 0.1 ~ 0.3 0603 1.6 ± 0.15 0.8 ± 0.15 1.0 0.1 ~ 0.65 6.3 10 20% 12.5% 6.3 10 16% 16 16% 20% 16% 16% 20% 12.5% 0805 2.0 ± 0.2 1.25 ± 0.2 1.45 0.25 ~ 0.75 Working Voltage (Vdc) 25 6.3 9% 16% 16% 16% 16% 16% 20% 20% 10 12.5% 12.5% 12.5% 12.5% 12.5% 16% 30% 16 9% 9% 9% 9% 12.5% 25 9% 50 9% 9% *2.5mm maximum thickness Percentages in the table represent the dissipation factor for that value. Y5V HIGH CV CAPACITOR VALUES AND SIZES (mm) EIA Case Size Length (L) Width (W) Thickness max. (T) Termination Width (P) Capacitance 1.0μF 1.5μF 2.2μF 3.3μF 4.7μF 6.8μF 10μF 22μF 33μF 47μF 100μF 1206 3.2±0.2 1.6±0.2 1.90 0.25 ~ 0.85 6.3 10 12.5% 12.5% 12.5% 12.5% 12.5% 16% 20% 16% 20% 16% (CONSULT FACTORY FOR CAPACITANCE VALUES NOT LISTED) 16 12.5% 12.5% 12.5% 12.5% 12.5% 12.5% 12.5% 25 7% 9% 9% 9% 9% 35 7% 9% 9% 50 7% 9% 1210 3.2±0.2 2.5±0.2 2.2 0.25 ~ 1.0 Working Voltage (Vdc) 6.3 10 16 25 35 12.5% 12.5% 9% 12.5% 12.5% 9% 12.5% 12.5% 9% 12.5% 12.5% 9% 20% 12.5% 12.5% 9% 12.5% 12.5% 9% 16% 12.5% 9% 7% 20% 16% 16% 1812 4.5±0.4 3.2±0.3 2.8 0.25 ~ 1.5 50 7% 6.3 7% 7% 20% 16% 20%* *2.8mm maximum thickness 20% 10 12.5% 12.5% 12.5% 12.5% 12.5% 12.5% 12.5% 16 9% 9% 9% 9% 9% 9% 9% 16% 16% 9% 25 5% 5% 5% 5% 5% 5% 5% 5% 50 5% 5% 5% 5% 5% 5% 5% Percentages in the table represent the dissipation factor for that value. W T P P L 100% Sn over Ni barrier ® 4 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com Multilayer Ceramic Chip Capacitors REEL Taping Specifications REEL DIMENSIONS (mm) Reel Diameter (A) 7” (178 ± 2.0) 10” (250 ± 2.0) 13” (330 ± 2.0) B D B C 50 min. 100 ± 1.0 100 ± 1.0 13 ± 0.5 D T max. 8.4 +1.0/-0 (1812 case size 12.4 +2.0/-0) 21 ± 1.0 7 INCH REEL QUANTITIES* Size Tape Size Min. Qty Per Reel Max. Qty Per Reel C 01005 8mm 0201 8mm 0402 8mm 0603 8mm 0805 8mm 1206 8mm 1210 8mm 1812 12mm 20,000 20,000 10,000 4,000 4,000 4,000 1,000 1,000 20,000 20,000 10,000 4,000 5,000 5,000 5,000 2,000 *Quantity dependent on chip thickness. Contact NIC for reel quantities on larger diameter reels. CARRIER TAPE MATERIAL T Parts with a thickness of >1mm will be taped on embossed plastic carrier. Parts with a thickness of less then 1mm will be taped on paper carrier A EMBOSSED PLASTIC CARRIER TAPE DIMENSIONS (mm) Tape Size W F 8mm 8.0 ± 0.2 3.5 ± 0.05 12mm 12 ± 0.2 5.5 ± 0.05 E P0 P2 D K max. 1.75 ± 0.10 4.0 ± 0.1 2.0 ± 0.5 1.5 +0.1-0.0 3.0 Notes: 1. Specifications are in compliance with EIA RS481-1-A “Taping of surface Mount Components for Automatic Placement” 2. Dimensions Ao (max.) equals component width dimension plus 0.5mm 3. Dimension Bo (max.) equals component length dimension plus 0.5mm T max. P 2.0 4.0 ± 0.1 4.5 8.0 ± 0.1 EMBOSSED PLASTIC CARRIER TAPE D Po T E P2 F Bo W Ao P K See notes 2 & 3 regarding dimensions Ao and Bo PUNCHED CARRIER TAPE DIMENSIONS (mm) Type Ao Bo 01005 0.25 ± 0.04 0.45 ± 0.04 0201 0.37 ± 0.03 0.67 ± 0.05 0402 0.65 ± 0.05 1.15 ± 0.05 0603 1.1 ± 0.2 1.9 ± 0.2 0805 1.65 ± 0.2 2.4 ± 0.2 1206 2.0 ± 0.2 3.6 ± 0.2 W F E P1 P0 D0 4.0 ± 0.1 1.5 +0.1/-0.0 2.0 ± 0.05 8.0 ± 0.3 3.5 ± 0.05 1.75 ± 0.1 4.0 ± 0.10 T1 max. 0.27 0.45 T2 max. 0.36 0.80 1.1 1.4 Mounting Hole Angular Punch Hole PUNCHED CARRIER TAPE D Po t1 E F Bo ® t2 NIC COMPONENTS CORP. www.niccomp.com Ao W P1 Component Pitch www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com 5