Single Phase Rectifier Bridge VRSM V VRRM V 800 PSB 35T/08 1200 1200 PSB 35T/12 1400 1400 PSB 35T/14 1600 1600 PSB 35T/16 1800 1800 PSB 35T/18 2000 2000 PSB 35T/20 Symbol IFSM IdAVM = 35 A VRRM = 800 V to 2000 V Preliminary Data Sheet Type Number 800 IdAVM PSB 35T Test Conditions Maximum Ratings Tc = 85˚C per module 35 A t = 10 ms 50 Hz, sine 400 A t = 8.3 ms 60 Hz, sine 440 A t = 10 ms 50 Hz, sine 360 A t = 8.3 ms 60 Hz, sine 400 A t = 10 ms 50 Hz, sine 800 As t = 8.3 ms 60 Hz, sine 810 A2 s t = 10 ms 50 Hz, sine 650 A2 s t = 8.3 ms 60 Hz, sine 670 A2 s Tvj -40 ... +150 ˚C Tvjm 150 ˚C Tstg -40 ... +150 ˚C Tvj = 45˚C, VR = 0 V Tvj = Tvjm, VR = 0 V ∫i dt 2 Tvj = 45˚C, VR = 0 V Tvj = Tvjm, VR = 0 V Visol Md Weight t = 1 min 2500 V~ Iisol ≤ 1mA t=1s 3000 V~ Mounting torque (M4) 1.5 Nm Terminal connection torque (M4) 1.5 Nm 105 g Symbol IR 2 50/60 Hz, RMS typ. Test Conditions Tvj = 25˚C ≤ 0.3 mA VR = VRRM Tvj = Tvjm ≤ 5.0 mA VF IF = 150 A Tvj = 25˚C ≤ 2.2 V VTO For power-loss calculations only 0.85 V Tvj = Tvjm 12 mΩ per diode; DC current 2.8 K/W per module 0.7 K/W per diode; DC current 3.4 K/W per module 0.85 K/W dS Creeping distance on surface 18.6 mm dA Creeping distance on air 18.6 mm a Maximum allowable acceleration 50 m/s2 Rth(j-c) Rth(j-s) Data according to IEC 60747 refers to a single diode unless otherwise stated www.powersem.com [email protected] Applications • Supplies for DC power equipment • Input rectifiers for PWM inverter • Battery DC power supplies • Field supply for DC motors Advantages • Easy to mount with two screws • Space and weight savings • Improved temperature and power cycling capability Package style and outline Characteristic Value VR = VRRM rT Features • Package with screw terminals • Isolation voltage 3000 V~ • Mesa glass-passivated chips • Blocking voltage up to 2000 V • Low forward voltage drop • UL registered E 148688 Dimensions in mm (1mm = 0.0394“) Page 1/1 ©2012 POWERSEM reserves the right to change limits, test conditions and dimensions v1.0