iBright ™ I38i T8 LED Tube G3 IPS US Family Model HFL-8030N-06060U-H0 HFL-8060N-12060U-H0 HFL-8080N-15060U-H0 Performance Summary iBright™ I38i T8 LED Tubes are the next generation solution in replacing conventional fluorescent lights. They feature higher reliability, easier retrofit, and higher efficacy in lighting and energy usage. Length: 1.96 ft (600 mm), 3.93 ft (1200 mm), 4.92 ft (1500 mm) Higher Reliability Luminous efficacy: iBright™ I38i LED Tubes are more reliable than fluorescent tubes for three reasons. 1) They utilize high quality SMD LEDs, which feature low light decrease over time and excellent heat dissipation; 2) they use specially designed aluminum housing that prevents internal heat buildup through a design allowing efficient heat dissipation; and 3) they use a specially designed loop circuit, meaning one LED failing won’t make the entire tube fail, as happens with fluorescent tubes. Lumens: Power consumption: 8W± 1W, 17W± 1W, 21W± 1W >95 lm/W 800-850 lm, 1600-1700 lm, 2000-2100 lm CCT: 2800-3200 K 4250-4750 K 5500-6500 K CRI: >84 Easier Retrofit iBright™ I38i LED Tubes can be placed directly into existing T8 sockets, simply by removing the starter and disconnecting the ballast in the fixture. Higher Efficacy iBright™ I38i LED Tubes use high quality SMD LEDs of high efficacy. They provide versatile lighting well-suited for use in offices, galleries, shop windows, hotels, meeting rooms. They are especially suited to operation in low temperature areas, just like conventional fluorescent lights. Choose the iBright™ I38i for general illumination, task lighting, display lighting, or back lighting. www.atgelectronics.com Toll free: 877-461-5333 Recommended Applications General illumination for homes, offices, restaurants, hotels, malls, buses, trains, warehouses, parking lots etc; Task lighting for cabinets, cupboards etc in your homes, restaurants, and kitchens or any other places where accent lighting is required. Retail display lighting for the articles in your stores and shops; Back lighting for square billboards or advertisement boards. Ordering Information Typical Order Example: T8I306HU60S0U0 SERIES GENERATION SIZE VOLTAGE CCT Lens Type T8=T8 Tube I3=G3 IPS 06=0.6m/2ft 12=1.2m/4ft 15=1.5m/5ft HU=100-277 VAC 30=3000K 45=4500K 60=6000K S=Striated Lens OPTION A 0=Default OPTION B U0=US Version Product Specifications CONSTRUCTION & MATERIALS Length Housing Tube Type Base Type Lens Type 1.96 ft (600 mm) 3.93 ft (1200 mm) Extrusion Aluminum and PC Diffuser T10 G13 Striated 4.92 ft (1500 mm) ENVIRONMENTAL SYSTEM Work Environment Operating Temperature Indoor use (applicable for dry environments) -20~40℃ (-4~104℉) OPTICAL SYSTEM Type Luminous Flux Color Temperature CRI Beam Angle 1.96 ft (600 mm) 3.93 ft (1200 mm) 800-850 lm 1600-1700 lm 2800-3200 K, 4250-4750 K, 5500-6500 K >84 120° 4.92 ft (1500 mm) 2000-2100 lm 1.96 ft (600 mm) 8W± 1W 100-277 VAC 50-60 HZ >0.95 4.92 ft (1500 mm) 21W± 1W ELECTRICAL SYSTEM Type Power Consumption Input Voltage Frequency Power Factor REGULATORY & VOLUNTARY QUALIFICATIONS UL, cUL CE, RoHS UL, cUL, CE listed external power supply www.atgelectronics.com Toll free: 877-461-5333 3.93 ft (1200 mm) 17W± 1W Photometric ZONAL LUMEN SUMMARY ZONE LUMENS % LAMP % LUMINAIRE 0-30 442.3 26.10% 26.10% 0-40 700 41.30% 41.30% 0-60 1189.7 70.20% 70.20% 60-90 434 26% 26% 70-100 272.7 16.10% 16.10% 90-120 65.8 3.90% 3.90% 0-90 1,623.70 95.80% 95.80% 90-180 70.7 4.20% 4.20% 0-180 1,694.30 100% 100% LUMINOUS INTENSITY Gamma C 0° C 45° C 90° C 135° C 180° C 225° C 270° C 315° C 360° 0.0° 392 392 392 392 392 392 392 392 392 15.0° 379 333 304 337 377 274 293 272 379 30.0° 313 292 276 292 315 246 203 248 313 45.0° 193 212 201 212 196 167 192 159 193 60.0° 93 127 213 121 105 126 167 120 93 75.0° 19 115 137 109 21 84 87 80 19 90.0° 0.23 58 58 68 0.06 34 41 32 0.23 ILLUMINANCE AT A DISTANCE BEAM SPREAD(FT) HEIGHT(FT) FOOTCANDLE HORIZONTAL VERTICAL 2 166.1 FC 5.5 3.9 12.2 4 41.5 FC 10.9 7.9 24.4 6 18.5 FC 16.4 11.8 36.7 8 10.4 FC 21.8 15.8 48.9 10 6.6 FC 27.3 19.7 61.1 BEAM ANGLE 107.5° www.atgelectronics.com Toll free: 877-461-5333 FIELD SPREAD(FT) HORIZONTAL VERTICAL FIELD ANGLE 89.1° N/A 143.7° www.atgelectronics.com Toll free: 877-461-5333 USER GUIDE Included in this box ATG Electronics iBright™ I38i T8 LED Tube (G3 IPS US), 1 Pc User Guide, 1 set Red-Black Wires, 2 PCs Wire Nuts, 4 PCs Note: Please read this entire manual to fully understand and safety use this product. Specifications are subject to change without notice. Please visit www.atgelectronics.com for the most recent user guide versions. Warning： WARNING – Risk of fire or electric shock. iBright™ I38i T8 LED Tube installation requires knowledge of luminaires electrical systems. If not qualified, do not attempt installation. Contact a qualified electrician. WARNING – Risk of fire or electric shock. Install this kit only in the luminaires that have the construction features and dimensions shown in the photographs and/or drawings. WARNING – To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other sharp objects. Lamp replacement instructions shall indicate the manufacturer's custom lamp part number, and a method to order replacement lamps by phone, website and/or mail. These instructions shall be included on an information sheet packaged with each unit. Retrofit Luminaire with Electronic Ballast Installation Steps Step 1: Turn off main power before installation. For safety, make sure main power source is switched off before attempting to install. Step 2: Take off existing fluorescent light and disconnect the ballast. Step 3: Cut four leads of G13 lamp holders. (For detailed placement of the cuts, note the X’s on the wiring diagram labeled “Before” shown below.) Step 4: Reconnect lamp holder leads L and N to the supply wires of branch circuit according to the wiring diagram below. Both G13 sockets of the fixture should be connected to the power source directly. Step 5: Install fixture as before. Step 6: Adhere a label to the luminaire to the effect of “This luminaire has been modified and can no longer operate fluorescent lamps.” on the retrofitted luminaire, where readily visible during relamping. Step 7: Install the iBright™ LED tube into the fixture. Step 8: Turn on the power. www.atgelectronics.com Toll free: 877-461-5333 Wiring Diagram for Electronic Ballast Before CUT CUT After Retrofit Luminaire with Magnetic Ballast Installation Steps Repeat Steps 1 to 7 of “retrofit luminaires with electronic ballast” excepting Step 3, changes in which are noted below: Step 3: Cut the ballast output lead and cut the wirings of the starter. Both the ballast and starter need to remain in place. (For detailed placement of the cuts, note the X’s on the wiring diagram labeled “Before” shown below.) www.atgelectronics.com Toll free: 877-461-5333 Wiring Diagram for Magnetic Ballast Before CUT After www.atgelectronics.com Toll free: 877-461-5333 CUT