QUARTZCOM OCO

OCO-M36AS
Through hole OCXO
Sine wave




Features
Applications: CDMA, 3G, networking, instrumentation
High frequency stability vs. temperature (up to ±1 x 10-10)
Wide operating temperature range: -40 up to +85 °C
Low aging
Specification
Parameter
OCO-M36AS5
Frequency range
Standard frequencies
Frequency stability
vs. operating temperature range
vs. supply voltage change
vs. load change
vs. aging after 30 days of operation
Short term stability
Output waveform
Output load
Supply voltage
Steady state current consumption @ +25 °C
Warm-up time
Frequency pulling range
Vcontrol (Vc) via external voltage
Reference voltage output (Vref)
Phase noise @ 10 MHz carrier frequency &
Vdc = 12 V
8.1920 ~ 20.0000 MHz
10.00, 12.80, 13.00, 16.384 & 20.00 MHz
 ±1.0 x 10-9
over -40 ~ +85 °C
 ±7.5 x 10-10
over -20 ~ +70 °C
-10
 ±5.0 x 10
over -10 ~ +60 °C
 ±5 x 10-10
±5 %
-10
 ±5 x 10
±5 %
-8
 ±3 x 10
1st year
< 5 x 10-12
Allan deviation per 1 s
sine wave > 300 mV (rms)
sine wave > 9 dBm
50 Ω
±5 %
+5.0 V 5 %
+12 V 5 %
< 400 mA
< 150 mA
< 3 min
< 2 x 10-8 @ +25 °C
> ±4 x 10-7
positive slope
0 ~ +4.5 V
0 ~ +5.0 V
+4.5 V
+5.0 V
< -125 dBc/Hz @
10 Hz
< -145 dBc/Hz @
100 Hz
< -150 dBc/Hz @
1 kHz
< -155 dBc/Hz @
10 kHz
Harmonics suppression
> -30 dBc
Operating temperature range
Storage temperature range
Case height (H)
OCO-M36AS12
-10 ~ +60 °C,
-20 ~ +70 °C, -40 ~ +70 °C
-55 ~ +85 °C
or -40 ~ +85 °C
10.0, 12.7 or 16.0 mm
Environmental test
vibration
shock
acceleration: 5 g; 10 Hz up to 200 Hz and down to 10 Hz; all 3 axes, 4.5 h/axis
75 g, half-sine, 3 ms
(3 shocks each, 6 directions)
Pin function
1#
2#
3#
4#
5#
Vc
Vref
Vdc
RF output
GND
Circuit diagram
CBP = 0.01 mF
Zout = 50 Ω
2002/95/EC RoHS compliant
QuartzCom AG
[email protected]
www.quartzcom.com
QuartzCom Asia
[email protected]
QuartzCom USA
[email protected]
12 May. 10