SF2024B ® • • • • • Designed for SDARS Receiver IF Application Low Insertion Loss 5.0 X 7.0 mm Surface-Mount Case Differential Input and Output Complies with Directive 2002/95/EC (RoHS) 467.751 MHz SAW Filter Pb Absolute Maximum Ratings Rating Value Units Maximum Incident Power in Passband +10 dBm Max. DC voltage between any 2 terminals 30 VDC -40 to +85 °C Storage Temperature Range Suitable for lead-free soldering - Max Soldering Profile 260°C for 30 s SMP-03 Electrical Characteristics Characteristic Nominal Center Frequency Passband Minimum Insertion Loss 1.5 dB Passband 3 dB Passband Amplitude Ripple from fc-6.344 MHz to fc-4.2985 MHz (-20 to 85°C) Amplitude Ripple from fc-6.344 MHz to fc-4.2985 MHz (-40 to -20°C) Amplitude Ripple from fc-4.4865 MHz to fc-2.441 MHz Amplitude Ripple from fc-2.629 MHz to fc+0.069 MHz Amplitude Ripple from fc-0.069 MHz to fc+2.629 MHz Amplitude Ripple from fc+2.441 MHz to fc+4.4865 MHz Amplitude Ripple from fc+4.2985 MHz to fc+6.344 MHz (-40 to 50°C) Amplitude Ripple from fc+4.2985 MHz to fc+6.344 MHz (50 to 85°C) Group Delay Variation over fc-6.344 MHz to fc-2.441 MHz and from fc+6.344 MHz to fc+2.441 MHz Group Delay Variation over fc±2.629 MHz Rejection fc-33 to fc-12 MHz and fc+12 to fc+33 MHz fc-12 to fc-10.5 MHz fc+9 to fc+12 MHz Operating Temperature Range Differential Input and Output Impedance Case Style Lid Symbolization (YY=year, WW=week, S=shift) See note 4 Sym fC IL BW1.5 BW3 Notes Min 1 Typ 467.751 18 14.2 15 Max 20 MHz 1 1.25 1 1 1 1 1 1.25 1, 2 GDV1 60 80 GDV2 60 40 40 24 120 1, 2, 3 TA 1 6 32 24 10 -40 Units MHz dB +85 150 ohms SMP-03 7 x 5 mm Nominal Footprint RFM SF2024B YYWWS dBP-P nsP-P dB °C Electrical Connections Connection Port 1 Hot Port 1 Ground Return Port 2 Hot Port 2 Ground Return Case Ground Terminals 10 1 5 6 All Others Notes: 1. 2. 3. 4. Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with impedance matching to 50 Ω and measured with 50 Ω network analyzer. Unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc. Rejection is measured as attenuation below the minimum IL point in the passband. Rejection in final user application is dependent on PCB layout and external impedance matching design. See Application Note No. 42 for details. "LRIP" or "L" after the part number indicates "low rate initial production" and "ENG" or "E" indicates "engineering prototypes." 5. 6. 7. 8. 9. 10. RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 ©1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. The design, manufacturing process, and specifications of this filter are subject to change. Tape and Reel Standard Per ANSI / EIA 481. Either Port 1 or Port 2 may be used for either input or output in the design. However, impedances and impedance matching may vary between Port 1 and Port 2, so that the filter must always be installed in one direction per the circuit design. US and international patents may apply. RFM, stylized RFM logo, and RF Monolithics, Inc. are registered trademarks of RF Monolithics, Inc. ©Copyright 1999, RF Monolithics Inc. E-mail: [email protected] http://www.rfm.com SF2024B-111504 Page 1 of 5 467.751 MHz SAW Filter 1 Oct 2003 16:31:31 CH1 S11 1 : 53 . 094 467 . 751 000 1 U FS 5 . 4805 MHz 1 . 8648 CH3 S22 1 : 62 . 180 467 . 751 000 nH 1 U FS -666 . 02 MHz 1 m 510 . 88 pF 1 PRm Cor Hld CENTR CH2 Hld 467 . 751 S21 MHz LOG SPAN 40 . 000 10 dB/ MHz CENTR REF 10 dB 467 . 751 1 : 0 . 0000 MHz dB SPAN 0 . 000 40 . 000 000 MHz MHz 1 CH2 BW : 3 2 Markers REF=1 14 . 012966 4 cent : 467 . 608187 Q: 33 PRm Cor 1_ loss : -19 . 249 Hld CENTER 467 . 751 000 MHz RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 ©1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. SPAN 40 . 000 000 MHz E-mail: [email protected] http://www.rfm.com SF2024B-111504 Page 2 of 5 467.751 MHz SAW Filter 1 Oct 2003 16:35:26 . CH1 S21 DEL 20 ns/ REF 740 ns Smo PRm C CH1 CH2 CENTER S21 467 . 751 LOG 000 1 dB/ MHz SPAN REF -16.76 dB 1 : 0 . 0000 dB 14 . 000 0 . 000 000 000 MHz MHz 1 CH2 BW : 2 cent 4 3 : Markers REF=1 14 . 015099 467 . 611486 Q: 33 PRm C CH2 1_ loss CENTER 467 . 751 000 MHz RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 ©1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. SPAN 15 . 000 000 : -19 . 226 MHz E-mail: [email protected] http://www.rfm.com SF2024B-111504 Page 3 of 5 467.751 MHz SAW Filter SMP-03 Case 10-Terminal Ceramic Surface-Mount Case 7 x 5 mm Nominal Footprint Case Dimensions Dimension A B C D E H J K P Recommended PCB Footprint Min 6.80 4.80 .47 2.41 0.87 4.87 2.87 1.14 mm Nom 7.00 5.00 1.65 0.60 2.54 1.0 5.00 3.00 1.27 Max 7.20 5.20 2.00 .73 2.67 1.13 5.13 3.13 1.40 Min 0.268 0.189 0.019 0.095 0.034 0.192 0.113 0.045 Inches Nom 0.276 0.197 0.065 0.024 0.100 0.039 0.197 0.118 0.050 Max 0.283 0.205 0.079 0.029 0.105 0.044 0.202 0.123 0.055 Materials Solder Pad Termination Au plating 30 - 60 uInches (76.2-152 uM) over 80200 uInches (203-508 uM) Ni. Lid Fe-Ni-Co Alloy Electroless Nickel Plate (8-11% Phosphorus) 100-200 uInches Thick Body Al2O3 Ceramic Pb Free Electrical Connections Connection Port 1 Port 2 Terminals Input or Return 10 Return or Input 1 Output or Return 5 Return or Output 6 Ground All others Single Ended Operation Return is ground Differential Operation Return is hot C B E H H A J D P K RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 ©1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. E-mail: [email protected] http://www.rfm.com SF2024B-111504 Page 4 of 5 467.751 MHz SAW Filter Tape and Reel Specifications 100 REF. "B" REF. “B “ Nominal Size Quantity Per Reel Inches millimeters 7 178 500 13 330 2000 See Detail "A" 13. 0 16.0 12.0 .2 20 2.0 COMPONENT ORIENTATION and DIMENSIONS Carrier Tape Dimensions Ao 5.5 mm Bo 7.5 mm Ko 2.0 mm Pitch 8.0 mm W 16.0 mm PIN #1 USER DIRECTION OF FEED RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 ©1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. E-mail: [email protected] http://www.rfm.com SF2024B-111504 Page 5 of 5