Preliminary SF2200E • Surface Mount 3.0 x 3.0 mm Package • Complies with Directive 2002/95/EC (RoHS) Pb 707 MHz SAW Filter Absolute Maximum Ratings Rating Value Units 20 dBm Input Power Level 3 V Operating Temperature Range DC Voltage on any Non-ground Terminal -40 to +85 °C Storage Temperature Range in Tape and Reel -40 to +85 °C 260 °C Solder Reflow Temperature, 10 seconds, 5 cycles maximum SM3030-6 Electrical Characteristics Characteristic Sym Center Frequency fC Insertion Loss, 698 to 716 MHz IL Notes Min Typ Max 707 Units MHz 3.0 Amplitude Ripple, 698 to 716 MHz 1.5 Return Loss, 698 to 716 MHz dB 7 Attenuation, 0 dB Reference: 10 to 680 MHz 30 745 to 978 MHz 30 978 to 996 MHz 35 996 to 2700 MHz dB 25 Source Impedance ZS 50 Load Impedance ZL 50 Case Style SM3030-6 3.0 x 3.0 mm Nominal Footprint Lid Symbolization (Y=year, WW=week, S=shift) dot=pin 1 indicator Standard Reel Quantity Ω 930, YWWS Reel Size 7 Inch 500 Pieces/Reel Reel Size 13 Inch 3000 Pieces/Reel Electrical Connections Connection Input Terminals Output 5 Case Ground All others 1 6 2 5 0 o h m L o a d 5 4 (b o tto m 5 0 o h m S o u rc e 2 3 v ie w ) CAUTION: Electrostatic Sensitive Device. Observe precautions for handling. Notes: 1. 2. 3. 4. 5. 6. 7. 8. Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with impedance matching to 50 Ω and measured with 50 Ω network analyzer. Unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc. Rejection is measured as attenuation below the minimum IL point in the passband. Rejection in final user application is dependent on PCB layout and external impedance matching design. See Application Note No. 42 for details. "LRIP" or "L" after the part number indicates "low rate initial production" and "ENG" or "E" indicates "engineering prototypes." The design, manufacturing process, and specifications of this filter are subject to change. Either Port 1 or Port 2 may be used for either input or output in the design. However, impedances and impedance matching may vary between Port 1 and Port 2, so that the filter must always be installed in one direction per the circuit design. US and international patents may apply. RFM, stylized RFM logo, and RF Monolithics, Inc., are registered trademarks of RF Monolithics, Inc. www.RFM.com E-mail: [email protected] ©2009-2010 by RF Monolithics, Inc. Page 1 of 5 SF2200E - 7/19/10 Filter Response Plots 707 MHz filter 0 S21 -1 spec. -2 -3 Att.(dB) -4 -5 -6 -7 -8 -9 - 10 687 692 697 702 707 712 717 722 727 Freq.(MHz) 707 MHz filter 0 S21 - 10 spec. - 20 Att.(dB) - 30 - 40 - 50 - 60 - 70 - 80 607 627 647 667 687 707 727 747 767 787 807 Fr eq.(MHz) www.RFM.com E-mail: [email protected] ©2009-2010 by RF Monolithics, Inc. Page 2 of 5 SF2200E - 7/19/10 707 MHz filter 0 S21 -10 s pec. -20 Att.(dB) -30 -40 -50 -60 -70 -80 10 217 424 631 838 1045 1251 1458 1665 1872 2079 2286 2493 2700 Freq.( MHz ) www.RFM.com E-mail: [email protected] ©2009-2010 by RF Monolithics, Inc. Page 3 of 5 SF2200E - 7/19/10 SM3030-6 Case 6-Terminal Ceramic Surface-Mount Case 3.0 X 3.0 mm Nominal Footprint Case and PCB Footprint Dimensions Dimension A B C D E F G H I J K L M N O K L N K N Min 2.87 2.87 1.12 0.77 2.67 1.47 0.72 1.37 0.47 1.17 mm Nom 3.00 3.00 1.25 0.90 2.80 1.60 0.85 1.50 0.60 1.30 3.20 1.70 1.05 0.81 0.38 Max 3.13 3.13 1.38 1.03 2.93 1.73 0.98 1.63 0.73 1.43 Min 0.113 0.113 0.044 0.030 0.105 0.058 0.028 0.054 0.019 0.046 Inches Nom 0.118 0.118 0.049 0.035 0.110 0.063 0.033 0.059 0.024 0.051 0.126 0.067 0.041 0.032 0.015 Max 0.123 0.123 0.054 0.040 0.115 0.068 0.038 0.064 0.029 0.056 Case Materials O Materials N M M PCB Footprint Top View Solder Pad Plating 0.3 to 1.0 µm Gold over 1.27 to 8.89 µm Nickel Lid Plating 2.0 to 3.0 µm Nickel Body Al2O3 Ceramic Pb Free TOP VIEW BOTTOM VIEW B 1 3 6 930 YWWS A 2 5 E 4 D www.RFM.com E-mail: [email protected] ©2009-2010 by RF Monolithics, Inc. G C F H 6 1 5 2 4 3 I J Page 4 of 5 SF2200E - 7/19/10 Tape and Reel Specifications Quantity Per Reel millimeters 7 178 500 13 330 3000 "B" REF. 100 REF. “B” Inches See Detail "A" 13. 0 12.0 20 .2 2.0 COMPONENT ORIENTATION and DIMENSIONS Carrier Tape Dimensions 2.0 3.35 mm Bo 3.35 mm Ko 1.40 mm Pitch 8.0 mm W 12.0 mm 4.0 PIN #1 A 1.50 1.75 0.3 ± 0.05 Ao Bo B Ao 12.0 5.5 RO.3 (MAX.) B Pitch A Ko R0.5 (MAX.) 1.5 SECTION A-A SECTION B-B www.RFM.com E-mail: [email protected] ©2009-2010 by RF Monolithics, Inc. USER DIRECTION OF FEED Page 5 of 5 SF2200E - 7/19/10