XTL1010 • Surface Mount Seam-Weld Package • Good Frequency Stability over Temperature • Excellent Reliability • Complies with Directive 2002/95/EC (RoHS) 12.00000 MHz Crystal Unit 2 > The XTL1010 is a surface mount 5.0 x 3.2 mm crystal unit for use in wireless telecommunications devices, especially where an ultra-miniature package is needed for mobility. SM5032-4 Case Electrical Characteristics Characteristic Sym Notes Minimum Typical Nominal Frequency 12.00000 Mode of Oscillation Fundamental Storage Temperature Range Operating Temperature Range Frequency Stability over Operating Temperature Range Equivalent Series Resistance MHz +85 °C -10 +60 °C ±30 ppm (referred to the value at 25°C) ±30 ppm @ 25°C ±3°C ESR 60 Nominal Drive Level 10 CO Shunt Capacitance Units -40 FL Frequency Make Tolerance Maximum 3.0 Load Capacitance CL 12 Motional Capacitance CM 4.0 fF ±20% Insulation Resistance Ω uW pF pF 500MΩ min @ 100 VDC Aging ±1.0 ppm/year @25°C Stanard Shipping Quantity on 330 mm (13”) Reel 3000 Lid Symbolization (in addition to Lot and/or Date Codes) Line 1: 1010 units Line 2: YWWS C r y s ta l E q u iv a le n t C ir c u it 2 C E S R 4 O CAUTION: Electrostatic Sensitive Device. Observe precautions for handling. Notes: 1. The design, manufacturing process, and specifications of this device are subject to change without notice. www.RFM.com E-mail: [email protected] ©2009-2010 by RF Monolithics, Inc. Page 1 of 3 XTL1010 - 2/3/10 SM5032-4 Case 4-Terminal Surface-Mount Seam Weld Case 5.0 x 3.2 mm Nominal Footprint 3.2 ±0.1 5.0 ±0.1 1 GND 2 IN/OUT GND 4 IN/OUT 0.8 ±0.1 3 0.8 ±0.1 Electrical Connections Pin Connection 1.2 ±0.1 1.2 ±0.1 2.4 ±0.2 pin 2 pin 3 pin 1 pin 4 1.4 ±0.2 1.2 ±0.1 1.7 ±0.1 Package Dimensions (mm) Dot Indicates Pin 1 2.2 ±0.1 Footprint (mm) 1010 YWWS 1010 YWWS 1010 YWWS Package Orientation in Carrier Tape www.RFM.com E-mail: [email protected] ©2009-2010 by RF Monolithics, Inc. Page 2 of 3 XTL1010 - 2/3/10 Reel Dimensions Tape Dimensions Notes: 1. Unless otherwise specified, tolerance on dimensions is ±0.1 mm 2. Material is black conductive polystyrene 3. 10 pitch cumulative tolerance is ±0.2 mm www.RFM.com E-mail: [email protected] ©2009-2010 by RF Monolithics, Inc. Page 3 of 3 XTL1010 - 2/3/10