XTL1016 • Ulta-miniature Surface Mount Seam-weld Package • Good Frequency Stability over Temperature • Excellent Reliability • Complies with Directive 2002/95/EC (RoHS) 48.53000 MHz Crystal Unit 2 > The XTL1016 is a surface mount 2.5 x 2.0 x 0.6 mm crystal unit for use in wireless telecommunications devices, especially where an ultra-miniature package is needed for mobility. SM2520-4 Case Electrical Characteristics Characteristic Sym Notes Minimum Typical Maximum Units Nominal Frequency FO 48.53000 MHz Load Capacitance CL 12 pF Mode of Vibration Fundamental Drive Level FL Frequency Make Tolerance Resistance 10 uW ±30 ppm @ 25 °C ±3 °C ppm ESR CO Static Shunt Capacitance Frequency Stability Over Operating Temperature Range 50 Ω 2 pF ±30 ppm (referred to the value at 25 °C) Storage Temperature Range -40 85 °C Operating Temperature Range -40 85 °C Aging 1 ppm/year Stanard Shipping Quantity on 178 mm (7”) Reel 3000 Lid Symbolization (in addition to Lot and/or Date Codes) units 2H YW C r y s ta l E q u iv a le n t C ir c u it 1 C E S R 3 O CAUTION: Electrostatic Sensitive Device. Observe precautions for handling. Notes: 1. The design, manufacturing process, and specifications of this device are subject to change without notice. www.RFM.com E-mail: [email protected] ©2009-2010 by RF Monolithics, Inc. Page 1 of 3 XTL1016 - 2/3/10 SM2520-4 Case 4-Terminal Surface-Mount Case 2.5 x 2.0 mm Nominal Footprint Electrical Connections Pin Connection 1 IN/OUT 2 GND 3 IN/OUT 4 GND Package Dimensions (mm) Dot Indicates Pin 1 2H YW 2H YW 2H YW Land Pattern (mm) Package Orientation in Carrier Tape www.RFM.com E-mail: [email protected] ©2009-2010 by RF Monolithics, Inc. Page 2 of 3 XTL1016 - 2/3/10 Reel Dimensions Tape Dimensions www.RFM.com E-mail: [email protected] ©2009-2010 by RF Monolithics, Inc. Page 3 of 3 XTL1016 - 2/3/10