XTL1013 • Surface Mount Seam-Weld Package • Good Frequency Stability over Temperature • Excellent Reliability • Complies with Directive 2002/95/EC (RoHS) 26.00000 MHz Crystal Unit 2 > The XTL1013 is a surface mount 3.2 x 2.5 mm crystal unit for use in wireless telecommunications devices, especially where an ultra-miniature package is needed for mobility. SM3225-4 Case Electrical Characteristics Characteristic Sym Notes Minimum FO Nominal Frequency Typical Maximum 26.00000 Mode of Oscillation Units MHz Fundamental Storage Temperature Range -40 +85 °C Operating Temperature Range -20 +75 °C Frequency Stability over Operating Temperature Range ±10 ppm (referred to the value at 25°C) FL Frequency Make Tolerance Equivalent Series Resistance ±10 ppm @ 25°C ±3°C ESR 50 Nominal Drive Level 100 Shunt Capacitance CO Load Capacitance CL 3 10.3 Insulation Resistance Ω uW pF pF 500 MΩ min @ 100 VDC Stanard Shipping Quantity on 178 mm (7”) Reel 3000 Lid Symbolization (in addition to Lot and/or Date Codes) units Line1: 1013 Line2: YWWS C r y s ta l E q u iv a le n t C ir c u it 2 C E S R 4 O CAUTION: Electrostatic Sensitive Device. Observe precautions for handling. Notes: 1. The design, manufacturing process, and specifications of this device are subject to change without notice. www.RFM.com E-mail: [email protected] ©2009-2010 by RF Monolithics, Inc. Page 1 of 3 XTL1013 - 2/3/10 4-Terminal Surface-Mount Seam Weld Case 3.2 x 2.5 mm Nominal Footprint 0.7 ±0.1 2.5 ±0.1 3.2 ±0.1 Electrical Connections Pin Connection 1 GND 2 IN/OUT 3 GND 4 IN/OUT 2.1 pin 1 pin 4 0.8 1.5 pin 3 1.5 1.2 1.4 pin 2 0.9 Package Dimensions (mm) Dot Indicates Pin 1 2.1 Footprint (mm) 1013 YWWS 1013 YWWS 1013 YWWS Package Orientation in Carrier Tape www.RFM.com E-mail: [email protected] ©2009-2010 by RF Monolithics, Inc. Page 2 of 3 XTL1013 - 2/3/10 Reel Dimensions Tape Dimensions www.RFM.com E-mail: [email protected] ©2009-2010 by RF Monolithics, Inc. Page 3 of 3 XTL1013 - 2/3/10