SHC-16GF* "W" PART NO. HOLDING DIAMERER RANGE THICKNESS "T" WIDTH "W" SHC-16GF* SHC-23 SHC-26 SHC-30 SHC-32 SHC-38 SHC-44 SHC-50 SHC-56 SHC-62 SHC-68 SHC-80 SHC-92 SHC-134 1/4 - 5/16 [6.4-7.9] 23/64 - 25/64 [9.1-9.9] 25/64 - 15/32 [9.9-11.9] 15/32 - 17/32 [11.9-13.5] 17/32 - 19/32 [13.5-15.1] 19/32 - 21/32 [15.1-16.7] 11/16 - 13/16 [17.5-20.6] 3/4 - 7/8 [19.1-22.2] 7/8 - 1 [22.2-25.4] 61/64 - 1 3/32 [24.2-27.8] 1 1/32 - 1 3/16 [26.2-30.2] 1 1/4 - 1 7/16 [31.8-36.5] 1 13/32 - 1 5/8 [35.7-41.3] 2 1/8 - 2 3/8 [54-60.3] .040 [1] .13 [3.3] .22 [5.6] .07 [1.8] .31 [7.9] .36 [9.1] .40 [10.2] * ONLY AVAILABLE IN GLASS FILLED NYLON MATERIAL. HOLDING DIA. "T" NOTES: 1. MATERIAL: NYLON 6/6 UL94 HB (RMS-73). GLASS FILLED NYLON (RMS-35), AVAILABLE BY SPECIAL ORDER. 2. COLOR: WHITE BLACK AVAILABLE BY SPECIAL ORDER. TITLE: H G F E REV. CORRECTED UL 94 RATING TO HB, SEE ECN # 1370 SEE CO 200718 FOR CHANGES SEE CO 200714 FOR CHANGES SEE CO 200707 FOR CHANGES SEE ENG FOR REV A TO D DESCRIPTION DZ 07/31/2012 SK 10/03/2011 SK 09/27/2011 SK 09/12/2011 ------ENGR. DATE CREATED USING SOLIDWORKS TOLERANCES UNLESS NOTED .XX=±.010 .XXX=±.005 FRAC.=±1/64 ANG.=±1° SNAP-IT HOSE CLAMPS FILE #: SHC SHEET: 1 OF 1 RE: SHEET SIZE: A RICHCO, INC. -- DWN: SK DT: 09/09/11 APP: SK CHKD: MJB RICHCO, INC. WWW.RICHCO-INC.COM PART # UNITS: IN [mm] FINAL PRINT TYPE SEE TABLE CA