RLT1060-150G TECHNICAL DATA High Power Infrared Laser Diode High power, single mode laser diode, featuring high reliability and long lifetime. Suitable for many applications including medical laser therapy and defense Features • • • • Lasing Mode Structure: single mode Peak Wavelength : typ. 1064 nm Optical Output Power: 150mW Package: TO 9 mm Electrical Connection Pin Configuration Bottom View n-type PIN 1 2 3 Function LD Anode LD Cathode, PD Cathode PD Anode Absolute Maximum Ratings (TC=25°C) Item CW Output Power Operating Case Temperature Storage Temperature Symbol PO TC Tstg Value 150 -20 … +50 -40 … +80 Unit mW °C °C Specifications (TC=25°C) Item Optical Specification CW Output Power Kink Power Peak Wavelength Spectral Width (FWHM) Far Field (FWHM) Emitting Aperature Chip Cavity Length Lifetime Electrical Specification Threshold Current Operating Current Slope Efficiency Operating Voltage Photodiode Current Symbol Min. Typ. Max. Unit PO PK λP Δλ θ║ θ┴ WxH - - 100000 150 180 1064 0.5 8 28 5x1 1.5 - - mW mW nm nm deg deg µm mm h 0.8 0.5 25 220 0.9 1.6 0.7 40 250 2.0 0.9 mA mA W/A V mA Ith Iop η Uop IPD 1059 - 1069 2.0 10 30 The above specifications are for reference purpose only and subjected to change without prior notice. 15.07.2013 RLT1060-150G 1 of 3 Package Dimensions 9 mm Package (Unit:mm) 15.07.2013 RLT1060-150G 2 of 3 Safety of Laser light • Laser Light can damage the human eyes and skin. Do not expose the eye or skin directly to any laser light and/or through optical lens. When handling the LDs, wear appropriate safety glasses to prevent laser light, even any reflections from entering to the eye. Focused laser beam through optical instruments will increase the chance of eye hazard. • WARNING: Laser Diode is emitting invisible light Cautions 1. Operating method • This LD shall change its forward voltage requirement and optical output power according to temperature change. Also, the LD will require more operation current to maintain same output power as it degrades. • Confirm that electrical spike current generated by switching on and off does not exceed the maximum operating current level specified herein above as absolute maximum rating. Also, employ appropriate countermeasures to reduce chattering and/or overshooting in the circuit. 2. Static Electricity • Static electricity or electrical surges will reduce and degrade the reliability of the LDs. It is recommended to use a wrist trap or anti-electrostatic glove when handling the product. 3. Absolute Maximum Rating • Active layer of LDs shall have high current density and generate high electric field during its operation. In order to prevent excessive damage, the LD must be operated strictly below absolute maximum rating. 15.07.2013 RLT1060-150G 3 of 3